1, first need some tools, including a new machine foot pad, jack, 10mm sleeve, 12mm sleeve, 14mm sleeve. Jack up the engine before removing the foot pad, and then open the hood;
< br >
2. Remove the air filter cover and pipe, remove the base of the air filter with 10mm and 12mm sleeves, and then remove the middle suspension by unscrewing three nuts and a bolt;
< br >
3, can adjust the height of the jack, easy to remove the suspension frame. Then you can see the exposed machine foot mat, factory, fixed machine foot mat screws are on the anti-slip glue, so it will take more effort to remove them;
< br >
4. Then you can see the installation seat of the machine foot pad, and install a new machine foot pad on it. Then put the air filter back on it;
< br >
5, when installing the suspension, pay attention to the accurate positioning of the positioning pin and the appropriate tightening torque of each fixed nut and bolt. Each nut and bolt should be tightened in a certain sequence, and cannot be tightened one by one. Pay attention to the distribution of torque;
< br >
6, the screw on the machine pad is best tightened with a torque wrench or electric torque wrench, so that the force of each screw will be more uniform.