Letter case status indicator: This light is on when the capitalization function is enabled, and will be off when the capitalization function is turned off.
These lights from left to right are: power lamp, charging lamp, hard disk lamp, wireless card lamp, numeric keyboard lamp, letter and case lamp. When writingAfter the notebook is turned on, the power light will normally be on until the notebook is powered off. The charging light will light orange when the battery is charged and will turn green when the battery is fully charged. When the laptop is working, the hard disk light will flash intermittently. When the wireless network card is working, the wireless signal light is on.
are respectively power indicator, charging indicator, hard disk indicator, flight mode indicator and case indicator.
The solution to the ASUS motherboard yellow light problem depends on the specific cause. Here are some possible solutions: Check the power supply: Make sure the power supply is working properly and check that all power cables are securely connected.If possible, try testing with another power supply that is known to work properly. Check the memory: Shut down the computer and unplug the memory strips, then reinsert them and make sure they are securely connected.
Asus motherboard bright yellow light, the possibility of memory failure is relatively large. a. Reinstall the DIMMs and check whether they are fully inserted, as shown in the following figure. b. If two or more DIMMs cannot be started when installed at the same time, check whether one DIMMs can be started and then connect other DIMMs in sequence to remove the faulty DIMMs. c. Replace the memory in the memory support list on the official website.
When the external power supply is connected, the charging indicator of the headset is off, which means that the battery is full.
Asus H610 and Rainbow H610 are two different brands of headset products, whether the power consumption is the same mainly depends on the design and manufacturing process of the product, so their power consumption may be different. In general, the power consumption of headsets is usually relatively small and has little impact on the power of devices such as computers or mobile phones.However, some factors can affect the power consumption of the headset.
First ASUS motherboard headset 2-in-1 setup Click Control panel - hardware and sound. Then insert the interface if a dialog box appears to select the audio device. Finally, plug the one-two connector marked "microphone" into the computer.
In the ASUS motherboard, you can set the sound and headset at the same time by the following steps: Click Control Panel - Hardware and Sound, select "Realtek HD Audio Manager"; Click the gear icon in the upper right corner and select options, select AC97 front panel; After the revision, in YoungIt will be checked on both the speaker and microphone. Use the above Settings. < / p > < p > right-click the taskbar speaker icon - recording equipment - the microphone - right click on the "disabled", then right click on the "enable". And point the microphone -- properties -- level -- appropriately adjust the microphone volume to try. You can test whether the microphone recording is normal under the system, start -- all programs -- accessories -- recorder.
1Here's how: Make sure you have a mouse that supports wireless charging. Connect the wireless charging mousepad to the USB port on your computer or power adapter. Connect the mouse on your computer to the mouse pad so that the mouse can be charged via the pad's wireless charging function. With a fully charged mouse, you can move freely on the mouse pad without connecting any wires or additional charging devices.
2, first turn on the computer wireless network. Second, Asus a bean wireless charging mouse pad will automatically search for wireless network connection after opening the button. Finally, wait for the connection to succeed and you can use it.