The distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the Xiaomi wireless charger must be properly plugged into the power outlet ifIf the connector is loose, the light will keep blinking. There is a problem with the charger.
First, we need to confirm whether our millet 11 supports wireless charging function. You can view this information in your phone's Settings. Enter "Settings" - "Battery and Performance" - "Wireless charging", if the "wireless charging" option appears, it indicates that the device supports wireless charging. After confirming that the device supports wireless charging, we need to prepare a wireless charger that supports the Qi standard.
Can be out of power, the protection status is blinking. When millet wireless charger, Millet wireless charger (universal fast charge version)When the LED light status is green and blinking, the Xiaomi wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings.
The reasons why millet mobile phones do not charge for no reason may be: the battery has entered a hibernation state, the charger is damaged, the phone is damaged, etc. This is mostly because the user runs out of battery and the phone automatically shuts down. The solution to this situation is to remove the battery, wait 5 minutes, and then reinstall the battery.Then connect the charger to charge, 30 minutes later, and then restart. Whether the phone uses a regular original Xiaomi charger.
2, the charger has a problem. If the above two cases are not a problem, then there may be a problem with the charger itself and it needs to be replaced or repaired. If you encounter the situation that the millet wireless charger light has been flashing, you can first try to adjust the distance between the charger and the phone, or check whether the interface is loose. If the problem still exists, it is recommended to contact Xiaomi customer service or go to a professional electronic repair shop for repair.
3, may be the location of the phone is not correct, you can adjust the position of the phone on the wireless charger; Maybe the phone's system has a problem, you can upgrade the system or'Portable wifi can't be charged. What's going on? '> How is it that the portable wifi cannot be charged?
Portable wifi charging no Wireless charging no The reasons for the power are as follows: Charging line failure: If the charging line of the portable WiFi fails, it can not charge other devices. At this time, you need to check whether the charging line is damaged or poor contact, and if there is a problem, you need to replace the charging line. Lack of battery capacity: The battery capacity of the portable WiFi is limited, and if the battery capacity is insufficient, it will not be able to charge other devices.
Wireless charge can not be charged Your usb interface inside the solder joint loose, you left or right or up and down the usb interface part, good luck may be able to rush into once or twice, with me a problem. The best thing is to get a phone repairman to weld it for you. Ten dollars.
Charger failure: Try to use the same specifications of the charger for charging, if it can be successfully charged, it is the original charger failure, to replace. Loose or damaged charging cable: Check that the charging cable is securely connected between the device and the power adapter. If the charging cable is loose or damaged, electricity will be generatedThe stream cannot be transmitted properly and cannot be charged. To replace a new charging cable, make sure the plug fits the connector tightly.
First, the most common reason is a problem with the charger or data cable. If you use an incompatible or damaged charger and data cable, it may cause the portable WiFi to be unable to charge normally. At this point, you can try to replace the charger or data cable to see if the problem is solved. Secondly, the battery of the portable WiFi may have been damaged or aged. Aging or damaged batteries can lead to reduced charging efficiency or even inability to charge.
You can first remove the battery to try and see if the electricity is removedAfter the pool, plug it in to see if it can be used, if it can, it is the battery problem. If not, it's the equipment. If you are a grid user, you can contact customer service to replace the battery or the device. Their customer service is quick to deal with problems.
Two possible causes: internal charging circuit failure. The battery is faulty. The portable WiFi router will inevitably be bumped during use. If there is virtual welding in the internal circuit, it is likely to cause the solder joint to fall off and thus cannot be charged. It is also possible that the electronic components in the circuit are damaged, resulting in a failure to charge. At this point, you can find a professional to open itLine check.
Possible problems or anomalies: However, a flashing green light may also indicate that some problems or anomalies have been encountered during charging. For example, if the connection between the charger and the device is poor, or if there is a charging problem with the device itself, the green light may flash to alert the user. In addition, if the power supply of the charger is unstable or there are other faults, it may also cause the green light to blink.
The subject is to ask the millet 10 mobile phone upgrade mWhat is the reason why wireless charging after iui14 can not be used? Here's why. According to the query of Xiaomi information, there is no corresponding wireless charging driver updated from the old version, or because the millet mobile phone is not equipped with wireless charging function, resulting in wireless charging cannot be used in the upgrade process.
Mi 10 changed the tail plug without wireless charging can be replaced with other wireless charging base for charging. Locate the fault for the mobile phone or the wireless charger fault, non-millet wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging function, must use millet official wireless charger for wireless charging.
If the battery is too low, the battery automatically shuts down and goes to sleep. Please remove the battery, after five minutes (m 3 because you can not remove the battery, please ignore this.) Connect the charger and charge it for more than half an hour. Please connect the charger for charging. During this process, the mobile phone led may not be bright initially, after a few minutes, the red light of the led begins to blink and become faster and faster, and when the red light is no longer blinking, it can be turned on.
Such as the indicator lightIn the off state, please check whether there is bad contact between the wireless charger, data cable, charger and power supply, and it is recommended that you re-plug it. 3, please take off the mobile phone protective cover before charging because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again.
Hello, please charge the phone with the screen facing up in the center position of the charger or the position suggested by the charger manufacturer.
Replace another wireless charging base and locate the faultA non-Huawei wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging function. You are advised to use Huawei official wireless charger. If the preceding problems persist, you are advised to back up the phone data (third-party applications such as QQ and wechat need to be backed up separately), bring related accessories and purchase vouchers, and go to a nearby Huawei customer service center for testing.
Please cross-verify please replace the device with wireless charging function, cross-check whether it is the wireless charger fault, such as the wireless charger is normal, the mobile phone is still unable to charge, it may be the mobile phone fault. It is recommended that you back up in advanceGood data (wechat /QQ and other applications need to be backed up separately) and bring the mobile phone, original charger, original data cable and purchase voucher to the nearby Huawei customer service center for testing.