In order to feel the choice between the oil car and the tram, I went to Taikoo car shop to test drive the Yuan EV, and downloaded the model car rental to rent a few tram to play, and the tattered Beiqi tram driving experience is much stronger than the same grade of oil cars. Domestic and foreign tram brands compared a circle, was not very interested in BYD Han EV whether it is configuration, performance, workmanship unexpectedly revealed the absolute advantage, so pay 10,000 yuan booked Han EV.
BYD Han has a good physiqueIts length, width and height are 4980 mm, 1910 mm, 1495 mm, and the wheelbase is 2920 mm. Such a body size is enough to support the positioning of BYD Han EV's medium and large cars, but compared with medium and large cars more than 5 meters long, it is still a little cramped.
BYD Han known as the global safety intelligent new energy flagship car, in addition to the car can feel a full sense of intelligent technology, its safety performance is second to none, the first BYD "blade battery" technology, safe and reliable, up to 605KM mileage is not inferior to fuel vehicles. There's plenty of room in the back,The leather seat and the backrest elevation Angle are large, and the ride feels very comfortable.
First of all, the BYD Han has a range of more than 600 kilometers, which eliminates my driving anxiety. With no fixed parking space, what I need to consider is the range. While I had been inclined to buy the BYD Yuan, I was ultimately attracted to the Han because it had more range and allowed me not to worry about battery life. Secondly, BYD Han uses blade battery technology to eliminate the hidden danger of spontaneous combustion.
1,In the process of charging and using electricity, there is always some power consumption and residue. So the charge is slow. Current rechargeable batteries, whether mobile phones or cars or other, are facing the problem of "capacity attenuation". In the process of charging and using electricity, there is always some power consumption and residue. 2, but it is said that the charging speed of Han EV wireless charging board is slow, it is estimated that about 10w-15w, but the heat of wireless charging is really large, the next time I have time to take thermal imaging to test the temperature of charging, on wireless charging also have to match the official wireless fast charging to be happy.
3, BYD Han wireless charging switch is located in the front of the center console central armrest storage box. The mobile phone wireless charging area of BYD Han EV model is located in the front of the central armrest storage box of the center console. When the vehicle power gear is in the "OK" gear, the phone can be placed on the non-slip rubber mat in the wireless charging area, with the phone screen facing up. In this position, the phone will automatically start wireless charging, and the charging icon will be displayed on the multimedia UI interface.
4, but the Han EV also has some shortcomings, wireless charging is relatively chicken, the mobile phone is put on, the display is charging, may be the power is relatively small, may also be due toThe flight can reach 205 km 205KM noble type, 205KM flagship type, with fast, provincial, quiet, smooth, green product characteristics, helping the new generation of family users to advance to the dream of living home.
Supports iPhone. Sonprodmi wireless charging supports Apple phones, Huawei, Xiaomi, OPPO, VIVO, Samsung. Wireless charging technology (English Wirelesschargingtechnology Wirelesschargetechnology) is the result of radio transmission technology, can be divided into low power wireless charging and high power wireless chargerElectricity two ways.
The camera doesn't work without electricity. As a monitoring system video signal acquisition, the camera plays an important role. Therefore, the monitoring system requires all cameras to be powered by the monitoring room separately, and the monitoring room is equipped with an online UPS to prevent the mains power failure and the monitoring system from losing its function. This will ensure that the camera will not stop working because there is no electricity.
YesHome surveillance cameras usually have to be plugged in to function properly. This is because surveillance cameras require constant power supply to keep video shooting, video signal transmission and other accessories powered. For most home surveillance cameras, they cannot be operated by battery power or other means that do not need to be plugged in, and must be connected to a power source to work.
If the monitoring camera is not connected to the power supply, the POE power supply mode through the network cable can work properly, provided that the camera supports POE power supply and the switch supports POE power supply.
The monitoring power is off, some can be monitored and some cannot be monitored. In factIt depends. Most camera devices that are not configured with backup power cannot continue to operate, and those that have a ups can continue to monitor. Various forms of power failure monitoring and early warning system, timely detection of power failure, timely remedial measures.
Does not require a broadband network. Surveillance cameras in addition to recording, there are remote viewing, humanoid detection, real-time alarms, two-way voice calls and other functions, these need to rely on the network to achieve, if there is no network, the practicality of surveillance cameras will be greatly reduced. Now there are also some support for 4G network card monitoring, plug in 4G network card can be directly connected to the Internet, the sameNo broadband network is required, but there are ongoing data charges for using a 4G network card.
Pinhole camera is generally composed of a lens, image sensor, image controller and other parts, some equipped with audio components, with recording function, due to volume limitations, the general function is relatively simple, can not adjust the focal length and aperture. Pinhole cameras can be divided into wired and wireless, record and view and storage after viewing and other different types, wired pinhole cameras are generally connected to a nearby computer, not easy to install and use.
Han 2021 ev mobile phone wireless charging cannot be charged. Check that the phone is centered on the back of the wireless charging pad. When there are inclusions between the mobile phone and the wireless charging pad, it cannot be charged normally. Check the back of the phone. If the protective phone cover used is too thick, it will hinder wireless charging, remove the phone cover and try to recharge. Please use the original charger. Use of non-original charger, resulting in failure to charge normally.
Please check whether the wired charging device is connected at the same time. If wired charging and wireless charging are used at the same time, it will be preferredUse wired charging.
Accord 2021 wireless charging did not respond because the wireless charging function was not turned on. The mobile phone is charged through the wireless charging board in the front of the vehicle, and the wireless charging function needs to be turned on in the vehicle system to realize the wireless charging function of the mobile phone. In the vehicle system, enter the function menu, open the Settings option, select Intelligent interconnection, select NFC and mobile phone wireless charging at the bottom of the menu, and turn on the wireless charging, the owner can operate by himself.
ratioYadihan series mobile phones have wireless charging function, and its power performance is relatively stable, 10W. However, if from the point of view of charging efficiency, wired charging shows a stronger strength, and the maximum power can reach an amazing 40W.
BYD Han mobile phone wireless charging power 10W. Wired, up to 40W, wireless charging to consider the interference of high-power electromagnetic waves on the surrounding environment, and electromagnetic radiation on the surrounding personnel physical damage.
W to 15W power. According to the relevant public information, Han dmi mobile phones support wireless charging power, ranging from 10W to 15W power, wireless charging is not recommended, and the power is relatively small, resulting in a slow charging speed.