If there is no socket reserved for the shoe cabinet, you can consider using the following methods to install the lamp belt:
1. Use a battery box
You can purchase a suitable battery case, place the battery in the battery case, and connect the light strip to the battery case. This method is more convenient and does not require construction, but requires regular battery replacement.
2. Use the remote control
You can buy a light belt with a remote control to turn on the light belt through the remote control to avoid operating the switch behind the shoe cabinet. This method does not require a reserved socket, and is also relatively convenient.
3. Install a wireless socket
You can install a wireless socket around the shoe cabinet to control the switch of the light belt by wireless remote control. This method requires some construction, but can achieve a more convenient use effect.
It should be noted that in the process of installing the lamp belt, we must pay attention to safety, such as avoiding short circuit, poor contact, overload and so on. You can ask an electrician or a friend with experience in electrical installation to assist in installation.
The light belt can be glued in the cabinet, and the ignition wire and neutral wire can be connected directly to the light belt through the sky close.
The Led light belt uses its own driver, the switch uses the boat-shaped switch of the bedside lamp, the wire passes through it, and the tape or double-sided self-adhesive tape is fixed in the convenient place of the switch. Of course, the use of infrared induction switch (not with light control) is more convenient.