The distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
Cut off the power in a moment, this is not putFor the location, a metal foreign object is detected, and the automatic protection setting determines that the official charging head is used. Second, look carefully at the wireless charging instructions, encounter a metal foreign body near, it will automatically cut off wireless charging, and continue to flash the green light, and return to normal after power off. Check to see if there is metal on the back of your phone, or if there is metal interference nearby, such as your "gold" (iron) ring.
Charging port of the charger or mobile phone is damaged: If the charging port of the charger or mobile phone is damaged, please contact after-sales service for repair or replacement.
Indication that it is charging: When the green light on the Xiaomi wireless charger begins to flashThis usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power. Possible problems or anomalies: However, a flashing green light may also indicate that some problem or anomaly has been encountered during charging.
The green light of the millet wireless charger has been blinking because the automatic protection setting of the charger has detected a metal foreign body. When the charger encounters a metal foreign body near, it will automatically cut off the wireless charging, and continue to flash the green light, and return to normal after the power failure. It is recommended to check if there is metal on the back of the phone, or if there is dry metal near the charger
1, if the green light flashes, you can try the following steps Millet 55w wireless charge has been green : Ensure that the device is closely connected to the charger, gently adjust the position, you may see changes. Try using a wired charger to charge your device and see if you still have the same problem, ruling out the problem with the wireless charger. If the above methods do not work, you may need to consider replacing the charger or ask Xiaomi customer service for help.
2, millet wireless charger green light flashing usually means that it is charging, but there may be a charging processSome problem or anomaly. Indicator that it is charging Mi 55w Wireless Charger is always green : When the green light on the Mi wireless charger starts to flash, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power.
3, the distance between the charger and the phone is too far or there are metal objects to block: The distance between the charger and the phone is closer to ensure that there are no metal objects to block. Low battery of charger or phone: Check whether the charger and phone are fully charged, ifInsufficient, please charge in time. Charging interface of charger or mobile phone is damaged: If charging interface of charger or mobile phone is damaged, please contact after-sales service for repair or replacement.
4, can be out of power, the protection state is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings.
5. The distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
6, millet wireless charger green light has been flashing because the charger detected metal foreign body automatic protection Settings. When the charger encounters a metal foreign body near, it will automatically cut off the wireless charging, and continue to flash the green light, and return to normal after the power failure. I suggest you check the back of your phoneWhether there is metal on the surface, or metal interference near the charger.
1, millet wireless charger green flashing, which is a signal that it is transporting power for the device, indicating that charging is in progress. Although the green light flashing in most cases indicates that the charging is normal, there may be a problem between the charger and the device, or some small situation of the device itself.
2, is charging indication: when the millet noWhen the green light on the line charger starts flashing, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power. Possible problems or anomalies: However, a flashing green light may also indicate that some problem or anomaly has been encountered during charging.
3. If the indicator flashes, it indicates that the charging status is abnormal and wireless charging cannot be carried out. The following exceptions may exist: The mobile phone is incompatible with the wireless car charging protocol. The phone does not support wireless charging.