1, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If used for protectionThe mobile phone cover is too thick may hinder wireless charging, it is recommended to remove the mobile phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
2, S6 can not fast charging reasons are mainly the following: poor connection for the use of non-original charger and data cable did not open the fast charge option software version led to the hardware failure of the phone itself can be carried out the following operations to try to fast charge: confirm whether the charging cable and charging head end is inserted to the end, if not fully inserted, can not achieve fast charging effect. Check whether the original charger is used.The charging cable.
3, shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
1. Use the original charger to connect to the home power supply for charging. Replace the power socket Try or replace a data cable with a charger to charge. For mobile phones with removable batteries, you can also try: 1) It is recommended to shut down and remove the battery, use a cotton swab to clean the battery contact and the contact point where the phone connects the battery. Reinstall the battery and try charging it again. 2) If possible, replace the battery or use a charger to try charging.
2, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the warranty is usedProtective mobile phone cover is too thick may hinder wireless charging, it is recommended to remove the mobile phone cover to try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
3, according to your description, I suggest you: Restart the phone and try. If the problem persists, it is recommended that you take the repair card, purchase invoice and mobile phone to the nearest Samsung mobile phone customer service test.
4, Samsung S6 uses QI technology, the transmitter coil and the receiving coil are small, need to fit relatively close, and the position can not be misaligned, in order to normal chargingConnect the wired charger directly to check whether it can be charged normally.
2, shutdown charging test. Replace the charging position and eliminate the intermittently caused by poor contact of the socket. If conditions allow to replace the standby charger for testing or repair testing, it is recommended to test after uninstallation when charging, such as the mobile phone is equipped with a third-party plug-in such as a charging doctor.
3, there are inclusions between the mobile phone and the wireless charging board, which may be caused by poor connection. 2: Please check whether the back center of the phone is placed in the center of the wireless charging board. 3: If the use of protective phone cover is too thick may hinder noWire charging, it is recommended to remove the phone cover and try again. 4: If you use a non-original charger, it may lead to normal charging. 5: Connect the phone directly to the wired charger to check whether it can be charged normally.
First reinsert the charging port of the phone with the data cable to make it charge normally, and then pull out the data cable to observe whether the charging state can be relieved normally. If not, there may be a circuit in the tail plug of the phoneShort circuit causes the phone to display the charging state incorrectly. You can shut down the phone first, and then clean up the dust and impurities in the charging port, and then turn on the phone to return to normal.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
Use the original chargingDevice shutdown charging, check the mobile phone shutdown charging is slow. If the phone only charges slowly when the phone is turned on, please: (1) End the background running program (recent application key in the lower left corner - End) (2) Uninstall the third-party battery management software in the phone. If the above operations do not work, see more solutions: (1) Check whether the phone has a version update, upgrade to the latest version.
1, please check whether the phone is placed in the back center of wireless chargingThe center of the board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
2, shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send to the repair test when charging, such as the mobile phone is equipped with a third-party plug such as a charging doctorIt is recommended to test after uninstallation.
3, your 13 May not have wireless charging because your device does not support wireless charging technology, or you are not using a compatible wireless charger. Device compatibility: First, we need to be clear that not all devices support wireless charging. If your device is an older model or doesn't already support wireless charging technology, it won't be able to charge wirelessly.
1, please checkThe back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
2, dear ~ hello, vivos7e can not be wireless charging, vivos7e belongs to the mid-end mobile phone of vivo, no wireless charging function, but vivos7e supports 33w fast charging. The vivoS7 phone does not support wireless charging. Mobile phone mostHigh only supports 33W wired charging, if you need to use wireless charging function, it is best to choose the same brand of higher specification mobile phone.
3, S7 Edge supports wireless charging, you need to purchase a separate wireless charging base.
4, S7EDGE wireless charging time is generally about 3 hours, it is recommended that you use the original 2A charger connected to the original wireless charging board to charge.