Because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. 4, please check the mobile phone and wireless chargerIf there are any other items in between, please remove them. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
handWhen there are inclusions between the machine and the wireless charging board, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
The causes are as follows: In the notification bar, click the button to enable wireless reverse charging. The charged device needs to be placed in the correct position in the center of the rear cover. The device to be charged needs to support the standard Qi wireless charging protocol (such as App)leWatch is a non-QI protocol wireless charging device, which cannot be charged by wireless backcharging function). There should be no metal ornaments or foreign objects between the phone and the device being charged.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to remove it againInsert it once. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Check the chargerAnd power adapter: Make sure that the wireless charger and power adapter you use are compatible with the Mate 30. Sometimes, incompatible chargers may not work properly. It is recommended that you use original or certified chargers and adapters. Clean and inspect the device: Check your Mate 30 and wireless charger for any dust, dirt, or foreign objects. These substances may interfere with the normal operation of the wireless charging function.
Please check wireless charger, charger,Whether the connection between the data lines is normal Wireless charge can not be charged all night Wireless charge can not be charged all night , do not place metal items between the mobile phone and the wireless charger, such as: magnetic stickers, magnetic cards, etc., such items will affect wireless charging. Different brands of models due to the difference in coil position, may lead to low charging efficiency or can not be charged, please put the mobile phone wireless charging area correctly in the wireless charger induction area to try.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Confirm wirelessCheck whether the charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert it once. Confirm that the center position of the mobile phone is placed in the center of the wireless charging base during the charging process, and remove the wireless charge between the device and the wireless charger can not be charged other items (such as bus card, metal and other substances).
Because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try againTry. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
First, check that the connection between the charger and the device is stable and ensure that the device is properly placed on the charger. Second, check whether the device itself has a charging problem, you can try to use a wired charger to charge to eliminate the problem of a wireless charger. Finally, if the above methods are ineffective, you may need to consider replacing the charger or contacting Xiaomi customer service for further support and solutions.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check your phoneThe back shell. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
1, the Apple 15 wireless charging can not be charged for the following reasons: the device is not aligned with the charger. If the device is not properly placed in the center of the charger, or there is a physical barrier, maybeCharging fails. The charger is not connected to power. Make sure the wireless charger is plugged into the power adapter and connected to the power supply. The power adapter is faulty. If the power adapter fails, it may affect the work of the wireless charger.
2, the charger or charging cable has a problem, the phone battery has a problem. Faulty charger or charging cable: Make sure you are using an Apple certified charger and charging cable and check for damage or wear. Mobile phone battery problems: Mobile phone battery has been aging or damaged, will also cause wireless charging can not work properly, the battery needs to be replaced.
3, thisMost of the cases are because the mobile phone fell to the ground resulting in the motherboard components out of welding, the probability is very small. If the battery is not charged and the motherboard is damaged, the store will charge you more than 500 so-called replacement motherboard fees, in fact, only need more than 100 replacement power IC is good. Non-original charger, charging cable damage this easy to do, ask people for an original iPhone charger and charging cable to try to know.
4, Apple wireless charger can not be charged for the following reasons: short circuit causes Apple mobile phone can not be charged into the reason, may be caused by short circuit charging interface, mobile phone charging interface there are a lot of bulletsSpring firing pins, these firing pins allow the line to be tightly connected to the plug of the charging data cable. But if these firing pins are bent, it will cause a short circuit and the phone will not be able to charge.
5, Apple mobile phone can not be charged for a variety of reasons, such as the data cable and charging port contact problems, poor contact will also lead to no charge. The data cable does not match, Apple's data cable must be certified by Apple to charge, the solution is as follows: Method 1: Because we are used to putting the phone in the pocket, the charging interface at the bottom of the phone is easy to enter the gray, which causes the interface to have poor contact with the power cord plug.
Because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Verify that the wireless charger indicator light is on normally, and check the connection between the charging base, data cable, charger, and power supplyWhether the contact is poor, you are advised to reinsert it. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Make sure your phone is compatible with your wireless charger: Make sure your phone supports wireless charging and that the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure the wireless charger is working properly and that the appropriate power adapter is connectedVerify that the power adapter plug is securely inserted into the power outlet.
Check whether the wireless reverse charging switch has been turned on. The path to setting the mobile phone is as follows: Set the battery and turn on the wireless reverse charging switch. Check whether the battery of your mobile phone is above 20%. If the battery of the mobile phone is lower than 20%, charge the mobile phone using the charger first.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone.If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.