1, do not support Huawei Pencil2 generation support wireless charging, but need to be used with Huawei tablet, Huawei Pencil2 generation support USB flash fast charging, plug and play, charging 5 minutes, writing 2 hours. Huawei Pencil 2 generation and some support magneticThe Huawei tablet with absorbing charge can realize magnetic pairing and wireless charging. The Huawei tablet that does not support magnetic charging needs to be charged with a Pencil charger.
2, but the second generation does not support Qi wireless charging protocol, can only be adsorbed on the iPad charging.
3, a ghostwriter gently tap the front section with your finger, and you can switch between the eraser and the pen. First of all, you need to check whether the software you use supports the setting of the double-click switch function of Apple Pencil. At present, most software supports it, but some software does not support this functionApple Pencil is simply used as a touch point, enter the internal Settings of the software, observe whether Apple Pencil is supported, and then adjust.
4. The first generation of pencil is designed with lightning interface, which can be charged directly by plugging into the iPad, or by connecting the USB cable to the power supply through the lightning converter. The second-generation pencil uses the design of magnetic adsorption and wireless charging, which can be charged only by magnetic adsorption on the iPad, compared with the banana fan charging model of the first-generation pencilThe new design can be said to be much more natural and elegant.
1. Method 1: Side adsorption charging as shown in the figure, the stylus can be charged after adsorption. Warm reminder: the tablet power is 20%, no matter the tablet light screen or the screen, the stylus in the adsorption area is in a charging state. HUAWEI M-Pencil can be fully charged for 1 hour and can be used continuously for 10 hours. This pairing method applies only to HUAWEI MatePad Pro and HUAWEIMatePad Pro 5G.
2. Take Huawei M-Pencil second generation stylus as an example: After the stylus is attached to the host, it can be charged. At the same time, the pairing prompt box pops up. Click "Connect" to pair the stylus. Stylus attachment position: The stylus groove is almost attached to the top of the host (on the side of the volume key). The specific position may vary depending on the model. You are advised to perform the adsorption in the correct position until the host displays a prompt.
3, side adsorption charging; Attach the stylus to the tablet and it automatically starts charging, whether the tablet is lit up or restingButton, you need to press and hold this button until the stylus indicator starts flashing, indicating that it is in pairing mode.
Mi Touch Pen II connected to Mi Tablet 5 can follow the following steps: Adjust the position of the stylus: Place the flat side of the stylus body in the middle position of the volume key side of the tablet body, and then slightly move the stylus body to adjust to the position with the maximum magnetic force. First connection: When the stylus is connected to the Mi Tablet 5 for the first time, tap the tap connection on the screen.
Place the flat side of the stylus in the middle of the volume button side of the tablet body, then to the leftGently move the stylus to the right and adjust the stylus to the position where the magnetic pull is maximum. When the stylus is connected to the Mi Tablet 5 for the first time, click [Click to connect] on the screen.
Operating phone: Mi Tablet 5pro Operating system: Android11 Mi tablet connected to the stylus method is as follows: Place the flat side of the Mi stylus body to the middle position on the top of the tablet body. After the pen body fits correctly with the middle frame on the right side of the tablet, a pen connection prompt will pop up on the tablet. Click Connect.
To connect the Stylus Pen to the Mi 6 Pro tablet, you needCheck device compatibility: Make sure your Stylus Pen is compatible with the Mi 6 Pro tablet. You can check the Stylus Pen's manual or contact the manufacturer to confirm compatibility. Turn on Bluetooth: On the Mi 6 Pro tablet, open Settings and select the Bluetooth option. Make sure Bluetooth is enabled.