1, mm thick wood. In general, the thickness of the wood penetrated by wireless charging will not exceed 8mm, which is the maximum charging distance of the traditional Qi standard. The thickness of wood that wireless charging can penetrate depends on the specific device and technology, at leastDifferences such as protocols may cause problems such as heating the phone.
2, it is recommended that you use the standard charger to charge. Although it is possible to use other third-party chargers to charge the phone, it may cause problems such as heating due to differences in charging specifications or charging protocols. Please put the phone in a good heat dissipation environment to charge. Put the phone in a good heat dissipation environment to charge, the environment with poor heat dissipation conditions will lead to slow heat dissipation during charging, thus making the temperature rise. Please avoid using your phone while charging.
3, the current smartphone fever is a normal phenomenon, this is because mostSmart phones all use high-performance cpus, and this year's new phones have many dual-core quad-core or even eight-core cpus. This is the same as the computer CPU, the better the performance, the greater the power consumption, and the power consumption is large, the battery discharge is fast, the battery will be hot when the rapid discharge, resulting in a higher temperature of the mobile phone CPU and battery, we will feel that the mobile phone is very hot.
4, if you use vivo mobile phone, please refer to the following suggestions: use the standard charger and data cable to charge; Clean up the background program: open i Butler - utility - mobile phone cooling - one key cooling; Keep the ring fitEnvironment temperature and heat dissipation environment, avoid foreign body coverage and direct sunlight; Turn off Network Acceleration: Go to Settings --WLAN-- Network Assistant -- Turn off "Data Network Acceleration"; Try to avoid using your phone while charging.
Middle wood has no effect. Wireless charging is transmitted to the charging device in the form of antenna electricity. Because radio waves can penetrate the board, the board can be filled. Because the wireless charging is ultra-short wave, the radio wavelengthVery short, large loss in the transmission process, the transmission distance is very close. The use of thicker wood will have poor charging effect, and thicker wood will affect charging.
When using wireless charging, put a plastic sheet between the phone and the charger, he can be charged, as long as your plastic sheet is not too thick, if it is too thick. It can't be charged. Wireless charging technology, derived from radio energy transmission technology, can be divided into low-power wireless charging and high-power wireless charging two ways. The best charging distance is 2-4mm, the coil can not be directly close.
If there's metal or something, thenIt will affect the normal charging. The effective distance said here is not because it cannot be done more distance, but a greater distance requires a greater frequency, this has international and national standards, not just casually can be raised, beyond the standard will not allow production.
Doesn't matter. If the damage is small, it doesn't matter. Because there's a black tape on the outside. It's not that easy to break inside. If you pry it, it'll be fine. It'll just affect the charge. It has no effect on other functions of the phone.
does not affect usage, but it does affect charging. Wireless charging technology is derived from radio energy transmission technology and can be divided into small workRate wireless charging and high-power wireless charging two ways. Electromagnetic induction is often used for low-power wireless charging. High-power wireless charging usually adopts a resonant mode by the power supply device (charger) to transmit energy to the electrical device, which uses the received energy to charge the battery, and at the same time for its own operation.
Wireless charging coil shape and transmission distance Introduction: Wireless charging transmit and receive coil distance of about 8mm. The QI standard is not just the distance between the two, but the frequency and communication protocol of the two wireless charging standards. This distance is a maximum distance, beyond this distance wireless connectionThe efficiency of the collection is very low. So it doesn't have to be 8mm.