Xiaomi smart socket does not have wireless charging function, can not wireless charging. Smart socket is a kind of socket that saves electricity, and the concept of energy-saving socket is very earlyIt has been generated before and has been developed widely so far, but there is still progress in technology.
Xiaomi once again refreshed the boundaries of mobile power design, launched the Xiaomi Mi wireless mobile power 30W, a portable and innovative charger.
First, we need to confirm whether our millet 11 supports wireless charging function. You can view this information in your phone's Settings. Enter "Settings" - "Battery and Performance" - "Wireless charging", if the "wireless charging" option appears, it indicates that the device supports wireless charging. Confirm device supportThe line (ground line) is three lines, and after being connected in the corresponding way, it can be realized. The electricity of the wireless socket is also provided by the wire, but it is called the wireless socket because it can be controlled by wireless.
Usually choose a place near the driver's seat. Next, connect to the cigarette lighter and use the USB data cable to connect the wireless charger to the cigarette lighter interface of the car respectively. Make sure that the charging pad is clean and place the phone face-up in the charging area of the charging pad. If the green charging symbol is displayed, it indicates that the phone has been properly placed and started charging.
Prepare the charging bank and the phone data cable (Some power banks come with their own data cable). Connect the data cable to the charging bank and the mobile phone respectively, and click the switch of the charging bank to start charging. After charging is completed, the charging bank automatically stops charging without any other operation. If you need to charge the power bank, you can use the data cable connected to the power adapter to charge. Do not drop, knock or shake the power bank.
Replace the power plug / : If the data cable is no problem, then it may be the problem of the power socket, try to change the socket. Professional tool diagnosis / : Download battery management applications, such as battery doctor, to detect the battery charging status, if it can be charged normally,The problem may be the phone itself.
Traditional wired charger This charger is our right-hand man, connected to the socket, and the current is closely connected. To extend its life, it is important to follow the correct use method, such as unplugging when not in use, to avoid voltage accumulation leading to damage to the internal components. Although phone chargers may be more susceptible to moisture than cell phones, it is important to avoid using them in the bathroom or kitchen. Humidity will accelerate the damage of the charger, so try to keep the environment as dry as possible.
Wireless charger: Wireless charger can transmit power to the device through electromagnetic induction technology, saveThe trouble of inserting and removing the charging cable is improved, and the charging efficiency is improved. Smart home devices: Smart home devices can be controlled by mobile phone or voice to achieve automated home management, such as smart light bulbs, smart sockets, smart door locks, etc., improving the efficiency of home management.
1, the speed of charging is related to the size of the output current of the charger, the output current is fast, and the opposite is slow. Charge the cigarette lighter you usedThe slow speed is most likely due to the small output current of the charging head inserted into the cigarette lighter. Cigarette lighter is a device in a car. The traditional cigarette lighter takes electricity from the car power supply and heats the electric heating unit such as the metal electric heating sheet or metal electric heating wire to take the fire source for the cigarette.
2, Mi 9 Pro supports 55W vertical air-cooled wireless fast charging, but there will be no fan rotation during the charging process. This is normal, because during fast charging, the phone will emit some heat, but it is not too high, so it does not need a fan to turn to dissipate heat.
3, the distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
4, charge the mobile phone to see if it can be normally full (that is, 100%) if the original charger of the mobile phone can be normally full, it indicates that there is a fault inside the wireless charger, if the original charger of the mobile phone can not be often full, this problem, in the charger, charging data line, mobile phoneWhen the tail plug is normal, the problem may be that the charging control circuit on the mobile phone motherboard is faulty.
5, at this time should pay attention to whether there is a metal object placed on the wireless charger, please take it off and charge again. Millet MIX3 standard equipped with: mobile phone host * minimalist mobile phone protective case * Power adapter * Millet wireless charger *USB Type-C data cable *Type-C TO AUDIO conversion cable * Pin * three-pack certificate * Getting Started Guide *1.
1, Millet new wireless charging evaluation: creative combination, practical and aesthetic coexistence of millet mall recently launched an innovative product popular in the crowdfunding, this combination of Rubik's cube and wireless charging device sold at a crowdfunding price of 109 yuan, very popular, showing consumers' recognition of millet innovation. This wireless charge is priced at 129 yuan, which not only has wireless charging function, but also has a socket design, and the cost is very high.
2, millet ecological chain enterprise purple rice strong launchZMI 10000mAh wireless charging mobile power supply, specially designed for Apple users to create a charging magic device has been released. This mobile power supply stands out for its professionalism and is MFI certified, ensuring seamless compatibility with Apple devices. Its metal one-piece housing is not only robust, but its rounded curved design adds comfort to the grip. Charging panel with anti-slip soft elastic coating, anti-slip and excellent feel.
3, Apple users are blessed! August 13 news, millet ecological chain enterprise purple rice released the ZMI 10000mAh wireless charging mobile power supply, which is the first domestic throughMFI certified mobile power supply. This mobile power supply uses a one-piece metal shell, which is fall-resistant and collision resistant. Arc design, more comfortable grip. The anti-slip soft elastic coating used in the charging panel is non-slip and also has a good touch.
Fasten the power cord with screws. Secure the power cable with a crimping bar. Close the back cover wireless charger socket , tighten the screws, you can plug into the power socket to use.
Pay attention when wiring, when facing the socket, that is normalWhen in use, ensure that the left side is connected to the neutral wire (green or yellow), the right side is connected to the live wire (red), and the above ground wire (flower wire). The switch is reversed, that is, from the perspective of the above figure, the wiring order should be the opposite, that is, the left side is connected to the live line, the right side is connected to the neutral line. Three-hole 16A socket: The socket used by high-power electrical appliances such as water heaters and air conditioners.
The network cable interface on the board has A color identifier, only need to insert the corresponding color of the network cable into the wiring port to press, the wiring order on the board and A/B wiring standard wiring order is different, do not worry about this, is the correct connection.
Connect the Mi smart plugboard to power. Install and open the Xiaomi Smart Home App on your phone, and add a new device by tapping the plus sign in the top right corner. The Xiaomi smart plugboard can be found in the list of added devices. Click on the Xiaomi Smart plugboard option. If you have used Xiaomi smart home at home before, then the app will automatically connect to Xiaomi smart plug-in version wireless charging socket ; If not, enter your wireless account and password.
And this plugboard is called a smart plugboard because it can connect to WIFI to remotely control home appliances,At the same time, you can set the timing function, in addition to the hardware, it also has overload protection, energy saving and other functions, very safe.