Your symptoms feel that the wireless charging module is damaged, I have been using wireless charging, did not find a similar situation. And you have replaced the wireless charger, two consecutive wireless chargers have similar problems, then it is likely to be the problem of the mobile phone charging module. orCheck whether the reverse charge of the phone is turned on and turn it off.
If the indicator is off, please check whether there is poor contact between the wireless charger, data cable, charger and power supply, and it is recommended that you re-plug it. 3, please take off the mobile phone protective cover before charging because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again.
Check the Settings: Make sure your Mate 30's wireless charging feature is turned on. You can findLook for the relevant option in Battery Settings in the Settings menu and make sure wireless charging is turned on. Check the charger and power adapter: Make sure the wireless charger and power adapter you are using is compatible with the Mate 30. Sometimes, incompatible chargers may not work properly. It is recommended that you use original or certified chargers and adapters.
This is normal and will always flash during use time. The causes and solutions of Huawei mate30pro wireless charging failure are as follows: Check the indicator of the wireless charging base. If the indicator is not on, check the charging base and data cableIf the connection between the charger and the power supply is in poor contact, it is recommended that you re-plug it. Please check whether there are other items between the phone and the wireless charging base, and remove them if there are.
Hello, please charge the phone with the screen facing up in the center position of the charger or the position suggested by the charger manufacturer.
Huawei Mate30Pro supports a maximum of 10V / 4A super fast charge, compatible with 4.5V / 5A or 5V / 4.5A super fast charge, compatible with 9V / 2A fast charge. The phone also supports 27W Huawei Wireless Super Fast charge and wireless reverse charging. There is noHow to use wire charging: Place the wireless charger on a horizontal surface and connect to the power supply. Place the phone/tablet that needs to be charged in the center of the wireless charger.
1, confirm whether to use the original charger; Includes charger plug and data cable. Some mobile phones have fast charge switch Wireless charge bad fast charge does not charge , you need to turn it on in the setting. Check whether the system has a new version wireless charger is brokenFast charge no charge and then try to upgrade the system.
2, there are some applications in the millet 11 system that interfere with the normal operation of the system wireless charging bad fast charging no charging . In particular, some programs that get root permission wireless charging bad fast charging do not charge , so for the sake of the system security of the mobile phone, please do not use root permission at will. The restart is because the software is not compatible with the current system version, in which case the software needs to be upgraded.
3, if 20WThe Xiaomi wireless charger is equipped with a 5W Apple original power plug to wireless charging the iPhone receiving 5W wireless charging power, then the final charging power is only 5W. Similarly, with a 20W Xiaomi wireless charger to charge a mobile phone with a wireless charging receiving power of 50W, the actual wireless charging power will not exceed 20W.
4, first of all, we need to confirm whether our millet 11 supports wireless charging function. You can view this information in your phone's Settings. Go to "Settings" - "Battery and Performance" - "Wireless charging", ifIf the Wireless Charging option is displayed, it indicates that the device supports wireless charging. After confirming that the device supports wireless charging, we need to prepare a wireless charger that supports the Qi standard.
Can not charge when connected to the charger Wireless charge bad fast charge no charge : (1) It is recommended that you use the standard wireless charge bad fast charge no charge charger and charging cableCharge it. (2) If your wireless charge bad fast charge does not charge mobile phone has not been used for a long time wireless charge bad fast charge does not charge , or low power shutdown does not charge the phone in time, there may be excessive battery discharge, it is recommended that you connect the charger, Charge for more than 30 minutes to see if the phone responds.
Wireless charging should be close to the wireless charging board, and the wireless charger should also be connected to the original fast charging head to charge.
You are advised to use the Huawei official chargerAnd data cables. (2) Please check whether there is foreign matter or dirt in the interface. Please ensure that the charging interface is clean and the port connection is stable before charging the phone. (3) Please disconnect the charger from the phone first, reinsert the charger, and then connect the phone to charge.
If your Huawei P40 Pro phone freezes and cannot be charged, try the following steps to fix the problem Wireless charge bad fast charge No charge : Force restart the phone: Press and hold the power button and volume reduction button of the phone (hold and hold for about 10 seconds at the same time) until the phone restarts.Check the battery level and charging port: Make sure the phone battery has enough charge, and use a working charger and charging cable to connect the phone for charging.
Because Huawei P40 mobile phone does not support wireless charging function (including wireless reverse charging), only supports up to 25W Huawei wired fast charge. In the same series, only Huawei P40Pro and Huawei P40Pro support 40W Huawei Super wired fast charge, 27W Huawei Wireless Super fast charge, which supports wireless reverse charging.
1, the charger itself has problems: the power cord of the charger is loose, the charging seat is damaged, the charging light is not up, etc., which will cause the charger to not work normally. Should check the charger itself has no problem, the problem is more serious, need to contact the after-sales service for repair or replacement.
2, the distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the Xiaomi wireless charger must be correctly plugged into the power socket if connectedA loose mouth keeps the lights flashing. There is a problem with the charger.
3, indicating that it is charging: When the green light on the Xiaomi wireless charger starts to flash, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power. Possible problems or anomalies: However, a flashing green light may also indicate that some problem or anomaly has been encountered during charging.
4, Mi 3 can not wireless charging reasons may be: wireless charging function is not turned on: please confirm whether the phone supports wireless charging, and in the Settings yesNo The wireless charging function is enabled. Charger problem: Please use a charger that can support wireless charging of your phone, such as Xiaomi's wireless charger. If the charger used is not compatible, it may also lead to wireless charging.
5, place the phone on the wireless charger, ensure that the contact between the phone and the wireless charger is good. At this time, the phone screen will display "charging" prompt, indicating that wireless charging has been enabled. It should be noted that the power supply of the wireless charger needs to be plugged into the power socket, otherwise it cannot be charged. At the same time, the distance between the wireless charger and the mobile phone can not be too far, the general recommendation