1, this is possible Beijing cbb wireless charging , it is the industryThe charge is made of PC flame-retardant plastic shell, the edge of the fuselage is clear and the end Angle is curved, the support plate is black, and the base is sandblasted gold. From the front, the front end of the base is equipped with LED indicators, and the support board is layered above and below, using different designs. Indicator light is green when working.
Millet vertical air-cooled wireless charger (55W black) 199 yuan at present millet maximum power (charging speed is the fastest) wireless charger, if the phone is 30W or 33W wireless charging power, then it is recommended that you "redundant" to buy this power of the wireless charger, because the phone upgradeIt is faster, and the wireless charger can be used for several years, and the new phone can also be covered with power in the future.
Compared with the common 10W wireless charging technology on the market, Xiaomi's 30W wireless flash charge can charge half of the 4000mAh battery in 25 minutes, achieving the efficiency of "wireless beyond wired". Xiaomi's vertical air-cooled wireless charge 30W is cleverly designed with an ergonomic tilt, which is convenient for users to operate while charging, and the built-in ultra-quiet fan can effectively actively dissipate heat, improving the comfort of the charging process.
Conclusion: Mi vertical air cooling noneWith its small size and large output, the wire charger has become a highlight of my recent purchase. The following is an intuitive introduction to this product: Unpacking experience: / Millet vertical air-cooled wireless charging 30W in white transparent plastic packaging, visible at a glance. Its simple and generous orange-red packaging box contains the main body, data cable, charging head and manual, reflecting the efficient style of Xiaomi.
Xiaomi not only launched 30W super wireless flash charge, but also released the first eye-catching vertical air-cooled wireless charging accessories, with a power of up to 30W, using Qi charging standard, with extremely high compatibility, wireless chargingPerformance has been raised to new heights.
1, the unlock recognition function is different non-UD version is the standard version, with 3D face recognition function; The MATE 20 ProUD not only has 3D face recognition, but also has the function of screen fingerprint unlocking, and the memory size of the two is different. The memory size of the MATE 20 ProUD version is 8G, while the memory size of the non-UD version is only 6G, obviously the UD version is bigger.
2, there is no difference in the design, the main difference between the two is in the mobile phone system unlock recognition function, Mate20 Pro unlock is 3D face recognition, the standard version of Mate20 Pro; The UD version means that the under-screen fingerprint recognition is used to unlock, and the under-screen fingerprint unlocking method is also added on the basis of 3D face recognition.
3, the difference between the two is that the price is different and the unlocking method is different. mate20proud version has under-screen fingerprint unlock, face unlock function, ordinary versionThe rear fingerprint unlock and face unlock. Secondly, in terms of price, the starting price of the ordinary version is 5399 yuan, the starting price of the ud version is 5999 yuan, and the difference between them is 600 yuan, which shows that the ud version is more expensive.
4, it is not recommended to buy ud version. UD version is more than an in-screen fingerprint, the memory is larger than the ordinary version of 2g, the ordinary version is 6gb memory, and the ud version is 8g memory, but the price is 600 more expensive. In terms of cost performance, this is not very good value.
5, Huawei Mate20ProUD version and non-UD version of the difference from memory, price reconciliationLock recognition function from these three aspects. First, the difference from the memory Huawei Mate20proUD version uses 8GB memory. The Huawei Mate20pro version uses 6GB memory, which is smaller than the UD version. Second, from the price point of view, Huawei Mate20proUD version is slightly more expensive.
6, the difference between the Huawei Mate 20 Pro UD version and the ordinary version is the screen fingerprint unlock, system, memory and storage, and processor. The Huawei Mate 20 Pro UD version uses on-screen fingerprint unlocking technology, while the ordinary version uses itUsing traditional fingerprinting technology. What's more, the UD version uses HarmonyOS, while the regular version uses Android. HarmonyOS is Huawei's self-developed operating system with improved security and performance optimization.
2, the use method is as follows Beijing cbb wireless charging : After plugging in the power supply, touch the finger at any position of the arc light pole to light up. Put the device that needs to be charged under the lamp, switch the mobile phone to the wireless charging mode, and put it into the wireless charging induction area of the lamp. Use the phone charging cable to turn the lamp UThe SB port is connected to the mobile phone, and the mobile phone can also be charged.
3, wireless charging, the desktop has never been so clean. The touch design is adopted, and the three touch buttons below are the light switch key, the on key and the timed shutdown key in turn. At the same time, this is also the wireless charging area, if your mobile phone supports wireless charging, it can be directly put up to charge the mobile phone, say goodbye to the bondage of the data line, the desktop is suddenly clean. Oh, and you can charge it wirelessly without turning on the lamp.
4, very simple, regular discharge. For example, every month (if there is no power failure), do not plug in the AC plug, turn on the light,If the light is not on, it means that the electricity has been discharged. Plug in the AC power.
5, this kind of music desk lamp generally can not give mobile phone wireless charging, now wireless charging words only that kind of small disc, like you this kind of music desk lamp it must still need a line connection, there is no connection then it must be that, well, there is not much of the role, so you still need to pass a certain connection. Technology that uses magnets to charge devices.
6, if you don't bring it, you can only bring a charging cable. Music lamp how to connect the mobile phone: Music lamp want to connect with the mobile phone, it is necessary to firstTurn on the lamp, then turn on the mobile phone to search for nearby devices, and play music after connecting with the lamp.
1, high cost: the charger needs to have the electronic circuit of the driving coil, and the electric device needs to have the electronic device of power conversion, both need to have the coil, and need the high-frequency filter circuit to meet the electromagnetic compatibility, so the cost is higher than the direct charging.
2, this is really OK, the customer used TDK GRM315C1In the scenario of H104A01L, due to the suspension of TDK, the market price is confused and the delivery is unstable. In view of this situation, Dongguan Keya Electronics has newly developed ultra-thin polypropylene film capacitor, which has reliable and stable performance, temperature rise, and can be placed after the size adjustment of the circuit board, and can be replaced with safety after 500-hour aging test and trial verification.
3, wireless charging technology does not use the charging line, but the use of magnetic field to charge the device a technology, inspired by wireless power transmission technology. Magnetic resonance is used to transfer electric charge in the air between the charger and the device, then the coil and capacitor are formed between the charger and the deviceResonance for efficient transmission.
4. At present, Huawei does not launch a capacitor pen with wireless charging function. Its capacitor pen can be charged using AAAA non-rechargeable batteries or by manually turning the pen end. However, with the continuous development of technology, the capacitor pen with wireless charging function may be introduced in the future to provide a more convenient use experience.
January 10Millet officially released this new mobile power product - Millet wireless charging treasure youth version 10000mAh. Compared with the old Xiaomi wireless charging treasure 10000mAh currently on sale, the overall appearance design of the Xiaomi wireless charging treasure youth version has changed little, and the color has been increased to black and white, which is more young and fashionable. The material of the youth version of the shell has been changed from metal to plastic, and the function has been slightly reduced, so the price has been reduced by 20 pieces.
2, compared with the Xiaomi wireless charging treasure 10000mAh currently on sale, the youth version is basically consistent in appearance design, but adds black and whiteColor choice, more young fashion sense. The shell material is changed from metal to plastic, and the function is slightly reduced, so the price is reduced by 20 yuan.