Finally, if the above methods are ineffective, you may need to consider replacing the charger or contacting Xiaomi customer service for further support and solutions. To better understand the problem, we can consider a practical example. Suppose a user places his Xiaomi phone on a Xiaomi wireless charger to charge it, but finds thatThe green light starts flashing.
may be the mobile phone placed in the wrong position, you can adjust the position of the mobile phone on the wireless charger; There may be a problem with the system of the phone, you can upgrade the system or restart the phone to use the wireless charger; It is also possible that the mobile phone wireless charging coil is damaged and needs to be repaired after sale.
The charger is faulty. If the above two cases are not a problem, then there may be a problem with the charger itself and it needs to be replaced or repaired. If you encounter the situation that the millet wireless charger light has been flashing, you can first try to adjust the distance between the charger and the phone, or checkThe machine original wireless charging can be faster. The charging effect of the mobile phone depends on the charger, but also related to the charging cable and the mobile phone. In terms of chargers, the general charger will have a built-in smart chip, which can identify the current and voltage required to charge the phone, and then adjust the current and voltage within the safe range of the phone.
Power plug power, wireless charger power, mobile phone wireless charging receiving power power plug power/wireless charger power/mobile phone wireless charging receiving power, these three key points are mutually reinforcing and mutually restrictive relationship, the final actual power is the 3The lowest power of the items is the actual charging power.
Mi 11 broken charging is slow, it may be the use of non-original charger. It is recommended to use the original charger, in addition, you need to charge in a low temperature environment, if you charge in a high temperature environment, the phone in the self-protection function will automatically reduce the charging speed to prevent overheating.
When the temperature is too high, the charging power will automatically decrease. All versions of Mi 11 charge temperature control is particularly strict, the temperature reached 36 degrees began to slow down 40%, normal to 9000ma, mobile phone temperature is higher than 36 degreesOnly about 5000 ma. The Mi 11Pro battery is equipped with a large battery capacity of 5000mAh, which supports 67W fast charging, 67W wireless charging, and 10W reverse charging.
1, then it is very likely that the charging mode is not compatible. That is to say, the device you use for wireless charging does not itself support wireless charging. So it's been flashing this light since it's been hooked up, butIt can't be charged.
2, the distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket, and if the interface is loose, the light will always flash. There is a problem with the charger.
3, indicating that it is charging: When the green light on the Xiaomi wireless charger starts to flash, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting powerForce. Possible problems or anomalies: However, a flashing green light may also indicate that some problem or anomaly has been encountered during charging.
4, the distance between the charger and the phone is too far or there are metal objects to block, the charger or the phone's power is insufficient, the charger or the phone's charging interface is damaged and other reasons. The distance between the charger and the phone is too far or there are metal objects: Close the distance between the charger and the phone to ensure that there are no metal objects in the way. Low battery of charger or mobile phone: Check whether the battery of charger and mobile phone is sufficient, if insufficient, please charge in time.
5, can YesThe battery is out. The protection state is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings.
6, the biggest possibility is that the position is not put right, after obtaining your mobile phone cover is too thick.