Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contactRe-insert once. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Replace the wireless charger: When our mobile phone appears in such a situation, it is likely that we have a problem with the charger, at this time we can replace a wireless charger to try (original wireless charger or usb data cable) restore factory Settings: if the fault is still on after the boot, at this time we can restore the mobile phone factory Settings to try.
Determine the phone and wireless chargerCompatibility: Make sure your phone supports wireless charging and that the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure that the wireless charger is working properly and that the appropriate power adapter is connected, and that the power adapter is securely plugged into the power outlet.
Please check whether the wireless reverse charging switch is turned on. The mobile phone setting path is as follows: Set the battery, turn on the wireless reverse charging switch Please confirm whether the battery of your charging mobile phone is 20%If the battery of the phone itself is less than 20%, please use the charger to charge the phone first, and then wireless reverse charging after the battery is higher than 20%.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
1, the reason why this brand of mobile phone can not wireless charging is A13 chip. This is because it uses Apple's self-developed A13 chip, which has low wireless charging efficiency and cannot meet Apple's requirements for wireless charging performance. In addition, the battery design of the Apple 15 also limits the use of wireless charging. Although Apple has added wireless charging in subsequent products, the Apple 15 still uses the traditional wired charging method.
2, Apple 15 wireless charging may not be chargedThere are the following: The device is not aligned with the charger. If the device is not properly placed in the center of the charger, or there is a physical barrier, it may cause charging failure. The charger is not connected to power. Make sure the wireless charger is plugged into the power adapter and connected to the power supply. The power adapter is faulty. If the power adapter fails, it may affect the work of the wireless charger.
3, there is an unpredictable error in the update of the ios system, and the iphone protection case is too thick. According to the query of the digital home website, the ios system update has an unpredictable error: resulting in wireless charging functionIf there is a problem, it can be solved by restarting the machine. iphone case is too thick: it can not be wireless charging, try to remove the case, and then put back on the wireless charging board to charge.
4. Second, you need to make sure that the iPhone 15 is placed in the right place on the charger. In general, there should be no obstacles between the phone and the charger, and the back of the phone (especially where the wireless charging coil is located) needs to fit tightly to the charger. When placing the phone, refer to the instructions of the charger to ensure proper alignment. To sum up, use the wireless charge of the iPhone 15The electrical function is very simple.
The ios system update has an unexpected error, and the iphone protection case is too thick. According to the inquiry on the official website of the digital home, there is an unpredictable error in the update of the ios system: it causes problems with the wireless charging function, which can be solved by restarting. iphone case is too thick: it can not be wireless charging, try to remove the case, and then put back on the wireless charging board to charge.
This brand of mobile phone noThe reason for the wireless charging is the A13 chip. This is because it uses Apple's self-developed A13 chip, which has low wireless charging efficiency and cannot meet Apple's requirements for wireless charging performance. In addition, the battery design of the Apple 15 also limits the use of wireless charging. Although Apple has added wireless charging in subsequent products, the Apple 15 still uses the traditional wired charging method.
Second, you need to make sure the iPhone 15 is placed in the right place on the charger. In general, there should be no obstacles between the phone and the charger, and the phoneThe back of the charger (especially where the wireless charging coil is located) needs to be tightly fitted to the charger. When placing the phone, refer to the instructions of the charger to ensure proper alignment. To sum up, using the iPhone 15's wireless charging feature is very simple.
The causes are as follows: In the notification bar, click the button to enable wireless reverse charging. The charged device needs to be placed in the correct position in the center of the rear cover. The device to be charged needs to support the standard Qi wireless charging protocol (for example, AppleWatch is a non-Qi wireless charging device, which cannot be charged through the wireless backcharging function). Cell phone and be chargedThere can be no metal ornaments or metal foreign objects between the equipment.
Check whether the phone is overheated Wireless charging can not be charged , it is recommended to charge under good heat dissipation conditions. Check whether the wireless charger indicator light is on normally Wireless charging is not , and check the charging base, data cable, charger, power supply noneCable charging is not charged Connection is not in poor contact Wireless charging is not charged , it is recommended to reinsert once. Confirm that the center position of the mobile phone is placed in the center of the wireless charging base during the charging process, and remove the wireless charging between the device and the wireless charger can not be charged other items (such as bus card, metal and other substances).
Because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the identification function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective coverThen try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Check the charger and power adapter: Make sure the wireless charger and power adapter you are using is compatible with the Mate 30. Sometimes, incompatible chargers may not work properly. It is recommended that you use original or certified chargers and adapters. Clean and inspect the device: Check your Mate 30 and wireless charger for any dust, dirt, or foreign objects. These substances mayCan interfere with the normal work of wireless charging function.
Replace the wireless charger: When our mobile phone appears in such a situation, it is likely that we have a problem with the charger, at this time we can replace a wireless charger to try (original wireless charger or usb data cable) restore factory Settings: if the fault is still on after the boot, at this time we can restore the mobile phone factory Settings to try.
Make sure your phone is compatible with your wireless charger: Make sure your phone supports wireless charging and that the wireless charger is compatible with your phone model. Different models of mobile phones may have no