1, when the data line is connected, the digital board is reactive, which may be the lithium battery is faulty. If data is attachedLine, even the digital board does not respond, it may be a problem with the data line, it may also be a usb port contact problem. The former may need to change the battery, the latter still have to check, try other computers have the same problem.
2, hello, after the purchase of the wireless module, it is recommended to be sufficient for 6 hours for the first time, and the power indicator on the wireless module turns green. In the future, it will be enough for 4 hours each time (the power indicator should also turn green) After the battery is sufficient, connect the receiver to the computer, press the open key on the wireless module, and the power light on the digital board flashes for 2-3 seconds, and it will be connected.
3, the tablet suddenly does not charge into the power may have the following reasons: the charger or charging line is damaged: try to replace the charger or charging line, determine whether it can solve the problem. USB port fault: Check whether the USB port is damaged, dust or dirt, and clean the port. Battery failure: If the tablet battery is aged or damaged, it may not be able to charge properly, you need to check the battery status and try to replace the battery.
4, replace a charger try, it may be the charger failure can not charge. If there is a redundant data line, you can also replace it, and you can also taste itTry replacing the power strip. A tablet computer, also called a portable computer, is a small, portable personal computer that uses a touch screen as its basic input device.
5, is the data line interface poor contact, may be a line, may also be a tablet computer. Check method: Change the charging cable to charge or use a friend's tablet to check. 2, if it is a problem inside the tablet, no matter what line is showing that it can not be charged or charged. Recommended maintenance. 3, insufficient voltage. This may be a power adapter problem, check method: is to change a power adapter to try.
2, the USB interface is not connected. The pen is broken, the driver has a problem, and you can re-download a driver on the official website of the friendly base. Your digital board is colliding with your computer system. It is recommended to fix it.
3, not light is normal, every time when your pen clicks the digital pad it will light up. There is also the above mentioned USB port is in poor contact, just like the mouse, there are two clunks. And the pen may also be broken, try to change the pen refill or remove the USB port and plug it in again. <4, do not rule out the charging port loose, or send repair, or buy a new, I personally feel that the durability of the battery pen is better than the charging pen, I do not know how much your board model is, you can ask customer service, your board can not use the battery pen, if you can, buy a battery pen spare, so that the pen can not be used.
5, you do not want to ask Tianmin digital plate pen point what happened. The pen is dead or the USB cable doesn't touch well. Solution: Replace the battery or reconnect the USB port, control panel - hardware and sound, find the digital boardSettings. If you can turn it on, just change it. If you can't, reinstall the driver.
6, which brand is your board, if it is a friendly base, the pen may be out of power, charging to charge, change the battery to change the battery, the use of the way to see the manual. If it is a wacom board, try another computer to test it to see if there is a problem with the pen, the worst may be the pen is lost.
iPThe ad display is charged, but it cannot be charged for a while. Wireless digital board is not charged for a while. Wireless digital board is not charged for a while. Charging accessories are damaged, the connection is not strong, there is debris in the bottom charging port, or the device is damaged. If the device is charging slowly or cannot be charged, the solution is as follows: (1) Check the charging cable and USB adapter for signs of damage Wireless digital board is not charged , such as broken or bent pins. Do not use damaged parts.
If you are using a Huawei tablet wireless digital board is not charged , the tablet cannot be charged Wireless digital board is not charged , you can judge the cause of the problem according to the following symptoms: Insert charging device, no charging icon & Sometimes no charging icon check whether the charging port is fully connected (including the tablet USB port and the charger port), and re-insert and remove the charger to try whether it can be charged.
Check whether the charger is in poor contact with the tablet or the power socket; pinchTouch the charger cable to check whether there is internal break, resulting in poor contact; The battery is faulty. A tablet computer, also called a portable computer, is a small, portable personal computer that uses a touch screen as its basic input device.
1, some wireless digital board and computer, mobile phone, tablet can be connected through Bluetooth and 4G signal, so the built-in battery, when the digital board is out of power, you need to charge the battery of the digital board.
2. Uninstall the driver and reinstall it. If... stillYes, it is possible that the driver is not uninstalled clean, restore the system and then install the driver, if it is still not possible, determine the problem of the pen, go online shopping for a pen, the usb interface is not connected, the driver has a problem, on the Youbase's official website to download a driver.
3, what you said is a bit confusing, I try to answer it. If your computer is a desktop, it is recommended that you connect the data line of the digital board to the usb port behind the computer case, which is necessary, which involves the power supply problem of the digital board, the usb port connected to the case in front of the case is often insufficient power supply, and can not operate.
4, if it is an active penIf the power is insufficient, it will cause the pressure pen to be unable to draw and there is no induction. If it is a wireless board, the lack of power is that the lithium battery built into the board has no power, which will lead to the lack of Bluetooth power supply, and the painting may appear intermittent, the wireless mode of the digital board is actually the same as the wireless mode of the mouse, and the lack of power will have an impact.
5, the hand-painted board suddenly no response may have the following reasons: power problem: hand-painted board needs a battery or power cord to work, if the power supply is insufficient or the power cord is poorly connected, it may cause the hand-painted board to not work properly. Connection problem: if hand painted boardThe connection to the computer is unstable or interrupted, which may cause the drawing board to be unresponsive.