Mi 9 uses Qualcomm Snapdragon 855 processor Qualcomm Snapdragon 855 some key information. Built on a 7nm process, the Snapdragon 855 has eight CPU cores and is designed for three clusters of 1, 3 and 4. The CPU core architecture of Qualcomm Snapdragon 855 is named Kryo 485, which is officially publicly stated to be based on the ARM Cortex-A76 architecture modification.
Parameter configuration of Mi 9 is as followsProcessor Qualcomm Snapdragon 855, CPU frequency: 1×84GHz 3×42GHz 4×80GHz; GPU: Adreno 640. Memory and capacity 6GB 128GB, 8GB 128GB, 8GB 256GB.
In addition, the Mi 9 is also available in a variety of colors, including Deep Space Gray, Holographic Purple and Holographic Blue. It comes with 12GB of RAM and 256GB of storage, allowing you to easily cope with every need. High-capacity battery, fast charging The Mi 9 has a 3300mAh large-capacity battery and supports 27W fast charging2 id=' The wireless light curing lamp cannot be charged '> The wireless light curing lamp cannot be charged 1, wireless charger, must be placed accurately, because the use of QI technology, the transmitter coil and the receiving coil are relatively small, not almost only 1/3 of the size of the mobile phone, so a slight dislocation, it can not be charged. It is also for this reason that Samsung's wireless charging mobile phones, or other similar QI wireless chargers, have not been promoted.
2, the uv lamp can be turned off normally for the first time, and then when the point is not bright, it is necessary to check whether the capacitor and transformer areIntact, the line is smooth, there is no bad contact phenomenon. Replacing damaged parts or re-reinforcing the wiring connection can usually solve the problem. 2) If there is voltage at both ends of the lamp, the line is normal, that is the lamp itself.
3, connect the light curing machine to the charger: Connect the light curing machine and the charger through the USB cable, ensure that the charger has been plugged into the power socket. Check the charging status: Normally, the indicator light of the charging time curing machine will light up, indicating that it is charging. Some light curing machines may also be equipped with a charging indicator light, you can observe the state of the indicator light to comeUncharging progress.
4, current problem. The output current of the power supply circuit is inconsistent with the nominal current, which will cause the light curing lamp to flash after turning on. Need to find the problem LED and replace, this is a technical content of the work, so need to contact home appliance maintenance personnel to solve.
5, the light curing lamp charging a night will burst the electrolytic capacitor in the circuit burst, because the capacitor is broken does not affect the energy of the previous battery, so the lamp can still be bright.
Turn off the light steps are as follows: Find the ink to rainbow 2pro rainbow rainbow light key Rainbow rainbow light wireless charge , usually located on the control panel or remote control of the lamp. Hold down the light button for a few seconds. During the press, you will see a flashing light or hear a beep. When Rainbow lights wireless charge You release the light key, ink will Rainbow 2pro lights will be turned off.
Ink will Rainbow 2pro can be turned off by long pressing the light keyLights. The Mozhan Rainbow 2pro is a wireless gamepad with features such as custom lighting and an RGB charging dock for full platform use. The lights of Mowill Rainbow 2pro can be switched on and off by the light key on the handle, and you can also customize the lighting Settings by connecting to the Mowill official APP.
The item can be turned off by long pressing the light key. The Mogen Rainbow 2pro is a popular gamepad with a lighting design that adds to the ambience of gaming. When it is necessary to turn off the light on the handle, the user can press and hold the special light key to achieve this. This design allows the user toThe lighting can be easily controlled during use to adapt to different environments and personal preferences.
Fixed with the handle by magnetic suction. The charging base is fixed with the handle through magnetic suction, and the chassis is designed with an RGB light belt. As long as the handle is placed on the chassis to charge, the light belt will automatically light up, and the lamp will be automatically extinguished when it is full. Even, the handle is wired and then power the base in reverse, even if the base is not plugged into any wire, it can still glow.
First, press and hold the backlight button to enter the backlight setting screen. On the backlight setting screen, select Customize Backlight. Then click the "Edit" button to enter the editThe interface. In the editing interface, you can see the ICONS of all keys. You can select the keys to be set by clicking the ICONS. Finally, after selecting the button you want to set, you can select different backlight modes from the options below, including steady on, breathing, blinking, etc.
Philips Sonicare: Philips is a well-known electronics manufacturer whose Sonicare series of electric toothbrushes are very popular in the adult market. Their children electricToothbrushes are also highly praised for their strong cleaning capabilities and cute design. Oral-b: Oral-B is another well-known Oral care brand whose children's electric toothbrushes are designed to be perfect for children.
Oral-B was born in 1938 in the United States, is the world's professional Oral care brand, one of the oral cleaning care products more complete brand, now belongs to the Procter & Gamble subordinate. Oral-b is a well-known company in the global general toothbrush and electric toothbrush market. In addition to adult and children's toothbrushes, Oral-B also produces dental floss and other interdental cleaning products for adults and childrenElectric toothbrushes for children, as well as dental flushing machines, and an oral health centre.
Saky toothbrush is of good quality, the hair is very soft, it will remind once after 30 seconds, and it will stop automatically after two minutes. Very clean, the charging cable is the USB charging cable, the power is sufficient, the vibration frequency is moderate, there are two gears, suitable for children to brush their teeth, just note that the bottom of the toothbrush can not be water, there are two gears, it should be strong and gentle, the child does not need to urge every day, active brushing.
1, don't worry, two recovery methods to help you easily! Press and hold the "Power Switch" and "Volume" keys at the same time for 15 seconds until there is a response. This method is suitable for most situations, simple and effective! Forced recovery Turn on the headset (without entering the pairing state) and charge for 5-10 seconds. Most Bluetooth headsets will be forced to shut down and restore factory Settings when they are charged while on. Although mandatory, some headphones may not work.
2, if the use of vivo Bluetooth headset, you can refer to the following Bluetooth headset to restore factory Settings: TWS system bewareThe method of restoring the factory Settings of the orange column Bluetooth headset is as follows: put the headset into the charging case, keep the charging case open, and press the function key on the charging case for 15 seconds until the orange light flashes quickly to release the button, then the headset will restore the factory Settings.
3. If you are using a vivo Bluetooth headset, such as Earphone, TWS Neo, and TWS 2/2e, you can check the following methods: Put the headset into the charging case, keep the charging case open, press and hold the function key on the charging case for 15 seconds until the orange light quickly flashes, release the button, and the headset will restore to factory Settings.
4In the operation of the mandatory initialization method, we first turn on the headset, and then charge the Bluetooth headset for 5-10 seconds, charging in the startup state, will be forced to shut down, and then enter the state of restoring factory Settings. First we need to keep the Bluetooth headset on. Press the RESET button with a toothpick for 5-10 seconds until the headset is turned off, and the factory Settings can be restored.
5. There are two methods for restoring Huawei Bluetooth headset to factory Settings: Method 1: (1) Put the headset back in the charging case and keep the cover open. (2) Long press the function key for more than 10 seconds, when you see the indicator red and greenAfter the blue light successively flashes, it means that the factory Settings have been restored. The second method: (1) Download and install Huawei AI Ecosystem APP on your mobile phone. (2) Connect the Huawei headset to the mobile phone through Bluetooth.