2, soft toothbrush Use a soft toothbrush, gently brush in the headphone hole and charging port, and then blow with a hair dryer or breath, cleaning effect doubled! Use a cotton swab dipped in alcohol to deeply clean your phone jack. The alcohol leaves no trace after volatilization, and is processed even more when it is turned offYes. But remember, do not wipe with water, so as not to cause water and rust of the phone.
3, how to clean the dust of the mobile phone charging port today again and again charged the power, and to re-adjust the data line to continue charging, just adjusted the charge moved and dropped.
4, toothbrush cleaning method: First prepare a toothbrush, and then wash the brush back and forth at the charging port of the phone, the fine toothbrush bristles can easily clean the dust inside, the bristles repeatedly clean several times, you can clean the dust.
5, the phone charging port has dust can be used to blow the dust off. Note: For cold weatherHot air blowing, but the temperature is not high, otherwise it will burn the interface. On a hot day, blow with a cold wind. Use double-sided tape to remove dust from the outside of your phone's charging port. Use a discarded soft-bristled toothbrush to gently brush the dust away from the joint. In addition, you can also use chewing gum to stick away the dust of the charging port.
1, fault cause 1: wireless charging protocol is incompatible. To use the wireless charging device of the vehicle to charge the mobile phone, the wireless charging protocol in the mobile phone needs to be compatible with the wireless charging protocol carried by the vehicleWireless charging can be realized smoothly. After the vehicle wireless function is turned on, the charging device that is not compatible with the protocol is placed on the wireless charging panel, which will trigger the vehicle alarm prompt, and the buzzer will emit a drip sound.
2, the wireless charging panel of Tanyue x is located below the center console cigarette lighter, which has a wireless WiFi signal indication, and there are two USB-C ports to charge the phone. The wireless charging board is equipped with a coil, and the coil is energized to generate a magnetic field, which is captured by the coil in the phone, and then the magnetic field is converted into current to charge the phone.
3, Tanyue x wireless chargeThe electric panel is conveniently located under the center console cigarette lighter, which is convenient and easy to use. The panel is clearly printed with an indicator icon similar to a wireless WiFi signal to help users quickly identify. In addition, two USB-C ports are also equipped next to the panel, providing more diverse charging options for the phone.
4, first of all, after purchasing the appropriate wireless charging equipment, fix the wireless charger in the position that you feel convenient. Then, connect the USB cable and plug it into the socket. Finally, when the phone is out of power or about to be out of power, put the phone casually on the charger board, the charger and the phoneInductive connection and charging will be realized in an instant, and the battery icon at the top of the phone screen will show the charging status when charging.
5. Does Tanyue support wireless charging? All 2020 Tanyue models are not equipped with mobile phone wireless charging function. Mobile phone wireless charging technology is a convenience configuration, it uses magnets to charge the phone, no additional use of charging cables, more convenient and fast. But unfortunately, this technology is not used in exploration.