1, the charging position is not checkedWhether the machine is facing the center of the wireless charging board, if not, it may cause failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affect the charging effect and they need to be removed. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
2, because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there are other items between the mobile phone and the wireless chargerIf yes, please remove it. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
3, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
4, does not support wireless chargingElectric: Make sure your OPPO A92s supports wireless charging. Only devices equipped with wireless charging can be charged via wireless chargers. Charger Problem: Please make sure that the wireless charger you are using is working properly and meets the wireless charging standard of OPPO A92s. It is recommended to use OPPO's original wireless charger or a certified charger.
5, place the phone on the wireless charger, ensure that the contact between the phone and the wireless charger is good. At this time, the phone screen will display "charging" prompt, indicating that wireless charging has been enabled. Need attentionThe power supply of the wireless charger needs to be plugged into a power socket, otherwise it cannot be charged. At the same time, the distance between the wireless charger and the mobile phone can not be too far, and it is generally recommended that the distance does not exceed 5mm. The above is the opening method of millet wireless charging.
1, the brand mobile phone can not wireless charging Wireless charging sometimes not charged The reason is A13 chip. This is because it uses Apple's self-developed Wireless charging Sometimes can not be charged A13 chip, the chip wireless charging efficiency is low, can not meet Apple's requirements for wireless charging performance. In addition, the battery design of the Apple 15 also limits the use of wireless charging. Although Apple has added wireless charging in subsequent products, the Apple 15 still uses the traditional wired charging method.
2, Apple 15 wireless charging may not be charged for the following reasons Wireless charging sometimes not charged : The device is not aligned with the charger. If the equipment is not correctPlacing in the central location of the charger, or there is a physical barrier, may cause the charging to fail. The charger is not connected to power. Make sure the wireless charger is plugged into the power adapter and connected to the power supply. The power adapter is faulty. If the power adapter fails, it may affect the work of the wireless charger.
3, there is an unpredictable error in the update of the ios system, and the iphone protection case is too thick. According to the query of the digital home official website, the ios system update appears unpredictable errors Wireless charging sometimes not charged : resulting in wireless chargingElectrical function problems can be solved by restarting. iphone case is too thick: it can not be wireless charging, try to remove the case, and then put back on the wireless charging board to charge.
4, second, Wireless charging sometimes does not charge You need to make sure that the iPhone 15 is placed in the correct position on the charger. In general, there should be no obstacles between the phone and the charger, and the back of the phone (especially where the wireless charging coil is located) needs to fit tightly to the charger. When placing the phone, please follow the instructions of the chargerTo ensure proper alignment. To sum up, using the iPhone 15's wireless charging feature is very simple.
5, Apple wireless charger can not be charged for the following reasons: short circuit causes Apple mobile phone can not be charged into the reason, may be caused by the short circuit of the charging interface, there are a lot of spring pins in the charging interface, these pins can make the line and the plug of the charging data line closely connected together. But if these firing pins are bent, it will cause a short circuit and the phone will not be able to charge.
6. The reasons are as follows: Click the button in the notification bar to enable wireless backcharging.If there are obstacles between the charging pad and the phone, such as keys, coins, etc., they will affect the charging effect and need to be removed. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
If the indicator is off, please check whether there is poor contact between the wireless charger, data cable, charger and power supply, and it is recommended that you re-plug it. 3, please take off the mobile phone protective case before charging because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the identification function of the mobile phone wireless chargerIt is recommended that you remove the phone protective case and try again.
Try to replace its Wireless charging sometimes cannot be charged He wireless charging base to charge, locate the fault is the mobile phone or wireless charger fault, non-Huawei wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging function, you are advised to use Huawei official wireless charger. If the preceding problems persist, you are advised to back up the phone data (third-party applications such as QQ and wechat need to be backed up separately), bring related accessories and purchase vouchers, and go to a nearby Huawei customer service center for testing.
If you use a Huawei mobile phone that cannot use wireless charging, perform the following steps: 1. Check whether the wireless charging device is connected at the same time. Sometimes it cannot be powered on.
The method is as follows: you can buy a mobile phone case that supports wireless charging, and install it on the mobile phone. The advantage of this method is simple and convenient, and there is no need to replace the mobile phone or remove the internal part of the mobile phone. The disadvantage is that it may increase the weight and thickness of the mobile phoneHeat dissipation and signal.
Shut down and chargeTest. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
Whether there is liquid or stain on the finger or screen. Liquid or stain on the finger or screen will affect the sensitivity of the touch screen. It is recommended to clean it with a clean dry cloth before trying. Check the film if you use a non-original film, it may affect the touch screen effect. You are advised to remove the film or go to the customer service center to re-apply the film.
If the touch screen of a Huawei mobile phone jumps or touches automatically, you can perform the following operations: 1. If the fault occurs when you charge a third-party charging device or a fixed place, the power supply voltage may be unstable. You are advised to replace the Huawei charger or charge it in another place (replace the power supply).
When the power button of your Xiaomi phone fails, don't worry, we provide you with the following three ways to restart your phone easily. Connect the charger First, make sure your phone is fully charged. Then, connect the damaged power button to the phone for chargingOn the tool. Wait a few seconds and see if the phone starts to boot. If you hold the volume up button or volume down button for a long time while connecting the charger, sometimes it can also trigger the boot.
If the screen touch is not sensitive, it is recommended that you take the machine to vivo customer service center for testing. Replace the standard charger or data cable If you use a non-standard charger, it may affect the touch screen function of the phone when charging the phone, it is recommended to use the standard charger and data cable to charge. Restart the phone Please restart the phone or forcibly restart the phone to check whether it is normal.