The charging method of smart bracelet K13 is as follows:
1. Find the bracelet charger: The charger attached to the K13 bracelet is generally a magnetic charger, and you need to find the charger first.
2. Connect the charger to the power supply: Connect the USB port of the charger to the power supply, you can use the USB port of the computer or mobile phone charging and other devices.
3. Adsorption bracelet: Align the metal contact on the back of the bracelet with the metal contact on the charger, so that the bracelet and the charger are adsorbed together.
4. Start charging: When the bracelet is successfully adsorbed with the charger, the indicator light on the charger will light up, indicating that the bracelet begins to charge.
5. Charging completion: When the bracelet's charging capacity reaches 100%, the indicator light on the charger will be turned off, indicating that the charging is completed. At this point, you can remove the hand ring and disconnect the charger from the power supply.
It should be noted that the original charger or a charger compatible with the wristband should be used when charging, and do not use an incompatible charger to avoid damage to the wristband. At the same time, it is also necessary to keep the metal contacts of the charger and bracelet clean to ensure the charging effect.
The answer is as follows: The smart bracelet K13 usually uses USB charging, which can be charged by the following steps:
1. Connect the bracelet to the charger, and ensure that the USB plug of the charger is correctly inserted into the charging port of the ring.
2. Connect the charger to a power outlet or USB port on your computer.
3. When the bracelet is connected to the charger and charged, the battery charging status will be displayed on the bracelet screen.
4. When the bracelet is fully charged, the bracelet screen will display a reminder that the charging is complete.
Note: During the charging period, please ensure that the bracelet and the charger are connected stably to avoid charging failure due to power failure. At the same time, do not exercise or other activities while charging the bracelet, so as not to affect the charging effect of the bracelet.
Smart bracelet K13 charging method is as follows:
< br >
1. Separate the bracelet host from the plug connector.
< br >
2. Insert the plug connector into the USB port.
< br >
3. Connect the wristband host to the connector.
< br >
4. After connecting, there will be a red or blue light on the plug connector, indicating that it is charging. When the light turns green, it means charging is complete.
< br >
5. The charging time is about 1.5 hours, and the use time depends on the use.
< br >
Reminder: In order to ensure the charging effect, it is recommended to use the original charger for charging, do not exceed the recommended charging time, keep dry while charging, and avoid water and items entering the jack.