1, when the millet wireless charger, millet wireless charger (universal fast charger) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again.
2, plug the plugged data cable into the millet phone, then the normal indicator light does not respond or flash. At this time, open the back cover and take out the battery, as shown in the figure (the data cable is still plugged in). If the screen displays the boot interface at this time, the charging is successful, and the battery can be charged normallyReinstall it, and the indicator blinks slowly for normal charging. If not, remove the battery again, normally for one success, usually no more than three times can be successful.
3. When the mobile phone is charged using the secure encryption flash charge device or QCQCUSB-PD0/0 (PPS), the dual lightning fast charge icon will be displayed on the right of the battery icon in the status bar; If a secure encrypted flash charging device with charging power of 30W or above is plugged in to charge under the lock screen state, you can see a new charging animation and a rapid increase in the percentage of electricity.
4, First of all, we need to confirm their millet 11 Check whether wireless charging is supported. You can view this information in your phone's Settings. Enter "Settings" - "Battery and Performance" - "Wireless charging", if the "wireless charging" option appears, it indicates that the device supports wireless charging. After confirming that the device supports wireless charging, we need to prepare a wireless charger that supports the Qi standard.
5, millet 9 two charging methods measured: wired fast charge, half an hour to 61%. 0-100 takes only 63 minutes. Wireless flash charge to 55% in half an hour. 0-100 takes 74 minutes.
6, Xiaomi mobile phone fastThis kind of icon. What follows is a clever combination of double lightning.
3. The charging icon of Huawei mobile phone is mainly divided into three types: Super fast charging mode: Huawei mobile phone is equipped with super fast charging appliance and standard data cable, and the charging icon displays "double Dalian lightning". Fast charge mode: The charging icon shows "one big lightning bolt". Common charging mode: Huawei 5V charger or non-standard charger, the charging icon displays "Single lightning".
4, a lightning symbol for fast charging. The number of lightning ICONS represents the charging speed of the phone. If there is a lightning bolt, it is a normal charging state. DangeWhen there are two lightning flashes, it means fast charging. Three lightning flashes, it's a super fast charge. How much lightning appears, on the one hand, depends on the mobile phone, when the mobile phone supports fast charging, it can automatically switch to the fast charging state.
Open Settings on your phone. Click the "Battery" option. Turn on the Wireless reverse charging switch.
Start charging the phone after placing it on the charging base for a few seconds Wireless charging fast charging icon , yesDrop Wireless charge fast charge icon sound, indicating the start of charging. The wireless charger consists of a charging head, a data cable and a charging base. Purchase Suggestions To ensure charging security, you can purchase a charging base from Huawei official channels and use the standard charging head and data cable. If you need to use wireless Super fast charge, you can purchase a dock that supports Super fast charge.
Connect the data cable to the charging head and the wireless charging base, turn on the power, put the mobile phone on the wireless charging base, and the mobile phone screen will show that it is fast charging. You can also use your phone for wireless directional charging, which you can tapTap Settings - Battery, turn on wireless reverse charging. Turn on the device to be charged and place it in the center of the back of the phone to start charging.
When the LED light status of the millet wireless charger and Millet wireless charger (universal fast charging version) is green and blinking, the millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again.
Plug the plugged data cable into the millet phone, when the normal indicator light does not respond or flash. At this time, open the back cover and take out the battery, as shown in the figure (the data cable is still plugged in). If the screen displays a startup interface at this time, the charging is successful, and the battery can be charged normally, and the indicator light flashes slowly for normal charging. If not, remove the battery again, normally a success, usually not more than 3The second time can be successful.
Place the phone on the wireless charger, making sure that the contact between the phone and the wireless charger is good. At this time, the phone screen will display "charging" prompt, indicating that wireless charging has been enabled. It should be noted that the power supply of the wireless charger needs to be plugged into the power socket, otherwise it cannot be charged. At the same time, the distance between the wireless charger and the mobile phone can not be too far, and it is generally recommended that the distance does not exceed 5mm. The above is the opening method of millet wireless charging.
Wait for the indicator to light up, indicating that the phone begins to charge. If the indicator light is not on, you need to adjust the bit of the phoneSet it so that the distance between it and the charger is within 3mm. When the phone is charged, it can be removed from the Xiaomi wireless charger. Expanding knowledge: Xiaomi mobile phone is a series of mobile phone products equipped with MIUI operating system released by Xiaomi Technology Co., LTD. As of September 2021, Xiaomi has released its latest version, Xiaomi Civi.