1. Try to replace another wireless charging base to charge the device, and determine whether the fault is the fault of the mobile phone or the wireless charger. The non-Huawei wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging function. If the preceding problems persist, you are advised to back up the phone data (third-party applications such as QQ and wechat need to be backed up separately), bring related accessories and purchase vouchers, and go to a nearby Huawei customer service center for testing.
2, the method that can be taken in this case is: determineMobile phone and wireless charger compatibility, check the charger and power adapter, check the alignment between the wireless charger and the phone. Make sure your phone is compatible with your wireless charger: Make sure your phone supports wireless charging and that the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model.
3. How to enable the wireless charging function in Huawei: Open the "Settings" in the mobile phone. Click the "Battery" option. Turn on the Wireless reverse charging switch. 1 Comment share Report Huawei terminal customer service 2024-02-13 · Turn every service into a warm memory for consumers Attention Hello, please charge the phone by placing the screen face up in the center of the charger or the position suggested by the charger manufacturer.
When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally. Please check the back of the phone.If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
Mobile phone problem: If your mobile phone has problems such as poor contact of the charging port and loose charging cable, it may lead to unstable wireless charging. Environmental interference: If there is other wireless signal interference around your wireless charger, such as WIFI, Bluetooth, etc., these may cause wireless charging instability.
Hello, if you use a wireless charger, there is always an intermittent charging prompt tone, it should be that the back of your phone is not accurately placed on the wireless charging contact surface, and it may be that your phone case affects the wireless charging, you can remove the phone case and try again.
Users can use the "Battery" in the Settings menu"Option to turn on the reverse charging function.
Huawei reverse charging can charge mobile phones that support reverse charging Huawei wireless charging is unstable , such as iPhone X, Samsung NoteNote9 and so on. Huawei mobile phone belongs to Huawei consumer business Huawei Wireless charging instability , as one of Huawei's three core businesses, Huawei consumer business began at the end of 2003, after more than ten years of development, in China, Russia, Germany, Sweden, India and the United States and other places set up HuaweiWireless charging unstable 16 R & D centers.
Huawei P50 Pro mobile phone is used as an example Huawei wireless charge is unstable : Enter the battery Settings (or enter the mobile phone butler battery) and turn on the wireless reverse charge switch. Turn on the device to be charged and place it in the center of the back of the phone. Warm reminder Huawei wireless charge is unstable : Do not place metal objects between the mobile phone and the device to be charged. If the device does not start charging after a few seconds, adjust the position and try again.
Huawei reverse charging always automatically shut down the reasons: insufficient power, high temperature, compatibility problems. Low battery: Make sure your Huawei phone has enough power to support the reverse charging function. If your phone battery is low, the system may automatically turn off the feature to protect the normal use of the phone. Overtemperature: When the temperature of a Huawei mobile phone is too high, the system automatically disables the reverse charging function to prevent overheating.
1, please take off the mobile phone protective case before chargingBecause some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
2, please use the original protective shell, do not use too thick or magnetic insulation material/metal protective shell, these protective shells may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged. If the above methodIf you cannot solve the problem, please back up your mobile phone data in advance, and take your mobile phone, wireless charger, wired charger set and purchase voucher to vivo customer service center for testing.
3, if your mobile phone cannot use wireless charging, please follow the following steps: Check whether the mobile phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger.
4, after investigation, if still can not wireless charging, it is recommended that you proposeBack up your data (QQ, wechat and other third-party applications need to be backed up separately) and take your phone, charger, data cable and purchase voucher to a nearby Huawei customer service center for testing. Tips: It is recommended that you use Huawei official wireless charger. Non-huawei wireless chargers may be incompatible with mobile phones, resulting in abnormal wireless charging functions. 5, the mobile phone does not have this function method is as follows: you can buy a mobile phone case that supports wireless charging, and install it on the mobile phone, the advantage of this method is simple and convenient, there is no need to replace the mobile phone or disassemble the internal phone, the disadvantage is that it may increase the weight and thickness of the mobile phone.As well as affecting the heat dissipation and signal of the phone.
1. If you use a Huawei mobile phone and the mobile phone cannot be charged wirelessly, perform the following steps: Check whether the mobile phone is overheated. It is recommended that you charge it in an environment with good heat dissipation. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger.
2, please take off the mobile phone protective case before charging becauseSome mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective case and try again. Please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
3, check the charger and power adapter: make sure that the wireless charger and power adapter you use is compatible with Mate 30. Sometimes, incompatible chargers may not work properly. It is recommended that you use original or certifiedChargers and adapters. Clean and inspect the device: Check your Mate 30 and wireless charger for any dust, dirt, or foreign objects. These substances may interfere with the normal operation of the wireless charging function.
4, make sure that the phone and wireless charger compatible: to make sure that your mobile phone supports wireless charging function, and the wireless charger is compatible with your mobile phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure the wireless charger is working properly and is connected to the appropriate power adapterPlug the power adapter firmly into the power outlet.
5. If the mobile phone cannot use wireless reverse charging, perform the following steps: Check whether the wireless reverse charging switch is turned on To set the mobile phone as follows: Set the battery and turn on the wireless reverse charging switch. If the battery of the phone itself is less than 20%, please use the charger to charge the phone first, and then wireless reverse charging after the battery is higher than 20%.
6, Huawei p40 can not wireless charging because it is not equipped with wireless charging function. HUAW