The Asus B550M Heavy Gunner Wi-Fi motherboard is usually equipped with different types of slots and interfaces to meet the connectivity needs of different devices. The following is the general plug-in connection method, for reference only:
< br >
1. Power cable:
- Connect the power cable: Connect the power cable to the 24-pin power port on the motherboard. This interface is usually located on the right edge of the motherboard.
- CPU power cable: Connect the CPU power cable to the 8-PIN or 4-PIN power port on the mainboard. This interface is usually located above the mainboard.
- Power cables, such as hard disks and graphics cards: Connect the power cables to the power ports on hard disks and graphics cards as required.
< br >
2. Front panel cable:
- Power button and indicator: Connect the power button and indicator to the corresponding port on the mainboard. This interface is usually located on the bottom or right edge of the motherboard.
- Audio port: Connect the front panel audio cable to the audio port on the motherboard. The interface is usually located in the lower left or right corner of the motherboard.
< br >
3. USB and HD-Audio cables:
- USB port: Connect the USB cable on the front panel to the USB port on the mainboard. These interfaces are usually located in the lower left or right corner of the motherboard.
- HD-Audio port: Connect the HD-Audio cable on the front panel to the HD-Audio port on the mainboard. This interface is usually located at the bottom of the motherboard.
< br >
The above is a general plug-in connection method, the exact connection method may vary depending on the motherboard model and chassis design. It is strongly recommended that you refer to the motherboard and chassis instructions during installation and follow the specific plug-in connections they provide.
1. Open the main box and disconnect the power supply.
< br >
2. Find the 3-pin jumper interface labeled \"WIFI\/BT\" on the motherboard, which is usually located on the top left side of the motherboard.
< br >
3. Find the attached jumper and connect the jumper to the interface. A jumper is a small accessory with 3 consecutive pins that may come with or with the motherboard.
< br >
4. When connecting the jumper, place the jumper on the interface so that the two pins on the left and the two pins on the right are connected, and leave the middle pin blank.
< br >
5. Make sure that the jumper is securely connected, close the main box, and restart the computer.
< br >
Once the jumper is connected correctly, your Asus B550M Heavy Gunner WiFi motherboard will be able to enable WIFI\/BT functionality smoothly. It is important to note that if you are using a removable antenna, you will need to connect the antenna to the antenna interface on the rear panel. If you have any questions, please review the motherboard documentation carefully or contact the motherboard manufacturer's support services.