1, you can tilt the iPhone downward to avoid further liquid into the device. Then, you can try to gently wipe the lightning connector and charging cable with a clean cloth. If the problem persists, it is recommended to place the iPhone in a ventilated, dry area. If the liquid is coffee, tea, cola, etcDrink, it is recommended that you do not attempt to recharge until completely dry.
2, love life of the small pig pig 1O 2023-11-16 · contributed more than 219 answers concerned about the Apple phone prompt interface has liquid can not charge, may be caused by the tail plug into the liquid, you can clean the tail jack or replace the original charger and data cable. If the problem persists, it is recommended to contact after-sales maintenance.
3, iphone interface liquid can not charge the treatment methods are: dry the IPHONE and LIGHTNING data cable, check whether the lightning cable is damaged, use APPLE-certified charger and LIGHTNING cable, forced IPHONE restart, use emergency coverage. The first thing you need to do to dry off your IPHONE and LIGHTNING cable is unplug any cables or accessories from your iPhone and then turn it off.
4, when the mobile phone appears this liquid detection notice, immediately unplug the charger, do not directly press the shutdown button to unlock into the mobile desktop; Click to enter Settings; Click General; Find the bottom shutdown, click to enter; Slide the cursor to close the phone. Don't blow your phone directly with a hair dryer. Use cotton or hygieneThe paper inserts the toothpick into the charging port to absorb the moisture.
5, when the Apple charge shows that the lightning interface detects liquid, it is usually due to the charging port has liquid or moisture. To eliminate this prompt, you can try the following steps: Unplug the charging accessories: First, make sure that the charging cable and accessories are dry and undamaged. Clean the charging port: Gently wipe the charging port with a dry lint-free cloth to ensure that there is no residual liquid. A dry air blow or vacuum cleaner can be used to remove moisture.
6, the apple charging port detects the reason why the liquid can not be charged there is liquid charging port When the charging port detects liquid, it isWith the protection device, it automatically cuts off the power supply to prevent liquid from entering the inside of the device and causing damage. There may be foreign bodies in the charging port because there are foreign bodies, such as dust, fluff or other debris entering the charging port. These foreign objects may cause physical damage inside the charging port or hinder the connection of the charging head, resulting in an inability to charge.
If charging the iPhone while the lightning port is wet, the lightning port or needle on the cableThe feet can corrode, cause permanent damage or fail to work, leading to connection problems with the iPhone or accessories. While you shouldn't charge your iPhone when it's wet, you may still need to do so in an emergency. If you connect the iPhone to the lightning cable or accessory again, you can ignore the liquid detection alert and continue charging the iPhone in case of an emergency.
If the following alerts appear, your iPhone has detected liquid in the lightning port, on the lightning cable, or on the lightning accessory. To protect your iPhone and accessoriesBefore lightning ports and accessories become dry, charging connections and accessories cannot be connected. Warning 1: Charging unavailable This alert appears when you connect your iPhone to the charger and your iPhone detects liquid.
If there is no water in the Apple port, it may not be water, but the lightning port is wet (possibly caused by moisture). If you charge the iPhone at this time, the lightning port or the pins on the cable may be corroded, causing permanent damage or not working, resulting in connection problems with the iPhone or accessories.
AppleUnplug the data cable or accessory, drain the iPhone port downward, and make sure there is no liquid in the golden finger part of the data cable. The charging port is facing down, and the "cold air" is opened by the hair dryer at the iPhone charging port for air drying to ensure that the water wireless liquid air drying, so as not to affect the normal wireless liquid charging. (Or use the back of the hair dryer, against the charging port, to suck the water out). Do not insert foreign objects (such as cotton swabs or paper towels) into the lightning connector to prevent debris from falling into it.
You can start by tilting the iPhone down to avoid further fluid entering the device. Then, you can try to gently wipe the lightning connector and charging cable with a clean cloth. If the problem persists, it is recommended to place the iPhone in a ventilated, dry area. If the liquid is a beverage such as coffee, tea or cola, it is recommended not to attempt to charge it until it is completely dry.
APPLE LIGHTNING interface detected liquid treatment methods: wireless liquid charging : dry the IPHONE and Lightning data cable, check whether the lightning cable is damaged, use Apple certificationThe charger and LIGHTNING cable, forced IPHONE restart, use emergency coverage. The first thing you need to do to dry off your IPHONE and LIGHTNING cable is unplug any cables or accessories from your iPhone and then turn it off.
Liquid is detected on the lightning connector of an iPhone The following causes occur: Liquid is detected on the lightning connector, lightning cable, or lightning accessory of an iPhone. To protect your iPhone and accessories, do not make charging connections and accessories connections until lightning ports and accessories become dry. Such asIf this alert appears every time you connect a cable or an accessory, the cable or accessory may be damaged.
When your iPhone's lightning port detects liquid, it means that the device has detected moisture in the lightning port, connected cables, or associated internal components. After this prompt, you should avoid charging or connecting any accessories until the lightning port and accessories are completely dry. If your device displays this prompt every time a particular cable or accessory is used, it could mean that those accessories are damaged.
You can tilt the iPhone down first to avoid further fluid entering the device. Then, you can try to gently wipe the lightning connector and charging cable with a clean cloth. If the problem persists, it is recommended to place the iPhone in a ventilated, dry area. If the liquid is a beverage such as coffee, tea or cola, it is recommended not to attempt to charge it until it is completely dry.
Love of life little pig 1O 2023-11-16 · Contributed more than 219 answers to attention Apple handThe machine prompts that the interface can not be charged with liquid, which may be caused by the penetration of liquid into the tail plug. You can clean the tail jack or replace the original charger and data cable. If the problem persists, it is recommended to contact after-sales maintenance.
The liquid detected by the APPLE LIGHTNING interface can be handled as follows: dry the IPHONE and LIGHTNING cable, check whether the lightning cable is damaged, use an Apple-certified charger and Lightning cable, forcibly restart the IPHONE, and use emergency coverage. The first thing you need to do to dry off your IPHONE and LIGHTNING cable is to remove it from your iPhoneUnplug any cables or accessories and turn them off.
Solution Power off the device and remove the battery (if it can be removed). If the device cannot remove the battery, disconnect the power supply as soon as possible. Wipe the liquid clean with absorbent paper or a towel and other dry items to avoid further infiltration of liquid into the device. If there is only water stains on the surface, you can put the equipment in a dry and ventilated place to dry, or use a hair dryer to dry at low temperature, avoid using a high temperature hair dryer.
When your iPhone shows the prompt "Lightning port detected liquid", it means that your phone detectedTo the moisture. This is a feature that Apple has set up to protect the device from damage caused by moisture entering the charging port. If your phone shows this prompt, you should immediately stop charging and take the following steps: Check your phone for water.
Mobile phone water If the mobile phone accidentally water Wireless liquid , immediately unplug the charger Wireless liquid , tap the phone downward to drain the liquid. Let dry for 30 minutes and try again. If the problem is still, it may be internal water stains, send to the maintenance center to solve. 2 Charger connector If the charger connector is damp, wipe the metal surface with a dry cloth or replace the dry charging cable.
Love life Wireless liquid charging Small pig 1O 2023-11-16 · Contribution Wireless liquid charging more than 219 answers concerned about the Apple phone prompt interface liquid can not be charged, may be the tail plugDue to infiltration of liquid, you can clean the tail jack or replace the original charger and data cable. If the problem persists, it is recommended to contact after-sales maintenance.
When your iPhone shows that liquid is detected while charging, it usually means that the phone may have been flooded, or the charging port is wet. In this case, if the charging continues, the metal pins of the interface may be corroded, resulting in damage to the device or failure to operate normally. You should immediately turn the phone upside down, pat it to drain any possible liquid, and place it in a well-ventilated, dry environment for at least 30 minutes.
indicates iPhoneThe wireless charge liquid liquid is detected in the lightning or USBC interface or on the cable or accessory. This situation can lead to corrosion of the pins on the interface or cable, resulting in permanent damage or failure to work properly, when you see such a reminder, you should immediately stop charging and disconnect. Apple mobile phone charging should use the original charger or national 3C certification charger.
The detection of liquid in the Apple phone charging means that the Apple phone is flooded, or it may be the lightning interface is wet, caused by moisture. If at this timeWhen charging an iPhone, the pins in the lightning port or cable can corrode, causing permanent damage or failure to work, resulting in connection problems with the iPhone or accessories. At this point, the lightning connector should be facing down, and gently pat the phone with your hand to discharge the remaining liquid.
Liquid is detected on the lightning connector of an iPhone The following causes occur: Liquid is detected on the lightning connector, lightning cable, or lightning accessory of an iPhone. To protect your iPhone and accessories, do not make charging connections and accessories connections until lightning ports and accessories become dry. If every connectionIf this message is displayed for a cable or accessory, the cable or accessory may be damaged.
Liquid detected in the Lightning connector This message may occur if the iPhone has detected liquid in the lightning connector, on a lightning cable, or on a lightning accessory. To protect your iPhone and accessories, do not make charging connections and accessories connections until lightning ports and accessories become dry. Such asIf this alert appears every time you connect a cable or an accessory, the cable or accessory may be damaged. If you experience this problem frequently, you may want to check your charging cable or charging head for problems, or consider replacing them.
Apple charging port detected liquid charging port There is liquid When the charging port detects liquid, in order to protect the device, it will automatically cut off the power to prevent liquid from entering the inside of the device to cause damage. There may be foreign bodies in the charging port because there are foreign bodies, such asDust, fluff or other debris enters the charging port. These foreign objects may cause physical damage inside the charging port or hinder the connection of the charging head, resulting in an inability to charge.
Apple iPhone phone prompt there is liquid in the charging port indicates that there is liquid in the gold finger area of the mobile phone data port or data cable. It is recommended to immediately unplug the data cable or accessories connected to the phone, and drain the remaining liquid with the phone interface facing down; Use an absorbent object such as a dry paper towel or cotton swab to absorb the remaining liquid in the port, and then stand the phone in a ventilated place for 5-10 minutes.
Liquid has been detected in the lightning connector of the iPhoneIs due to the charging port contact with water, coffee, drinks and other liquids, or due to the current environment is relatively humid, it means that the charging interface or data cable of the Apple phone detected the presence of liquid, in addition, such as the charging cable or plug is not clean, such as dust, dirt, etc., will also lead to the Apple phone prompt lightning interface detected liquid.
The fact that the lightning interface detects a liquid means that the phone has entered a small amount of water. The Apple Lightning interface detects liquid, which is a new feature brought by Apple officials, mainly to protect the iPhone and charging accessories. If there is liquid in the lightning port, the iPhone willIssue a warning that in order to protect your device accessories, charging connections and accessories cannot be made until lightning ports and accessories become dry.