Appearance difference: The iPhone12 uses a 1-inch super Retina XDR display (OLED material), which supports face ID, providing blue, green, black, red and white 5 colors, while the pg11 uses a 1-inch Liquid Retina HD display (LCD material), which supports face ID. Available in 6 colors: purple, yellow, green, black, white and red.
PG thread: The pitch of PG11 is 41, outside diameter16, base diameter 126, tooth Angle 80° PG thread is the German PG thread specification size. Execution standard: DIN40430, tooth Angle is 80°.
PG11 belongs to the high 8 bits of the I/O port. The GPIOG-CRH register needs to be configured for this purpose. PG7 belongs to the lower 8 bits of the I/O port. The GPIOG-CRL register needs to be configured for this purpose.
iPhone12 is better In fact, the appearance of iPhone11Pro and iPhone12 are actually similar, but the camera is slightly differentYou can charge it if you want to put it on, and Apple itself does not have a built-in receiver, so it can not be charged wirelessly if you put it directly on. But when you add a case with wireless charging, you can use Samsung's wireless charger.
Samsung wireless charger 0v 67A can not charge iphone11. Because Apple mobile phone charger requirements are very strict, can only use the original charger to charge, otherwise there are security risks.
PG/PC interfaceIt is a profibus bus, and PN/IE is a profinet bus. PROFIBUS-DP: has a very high communication rate up to 12Mbit/S. Using line, star, ring and other topological structures. Fiber double loop redundancy can be realized. PROFIBUS-DP can also provide a high-speed communication bus for process instruments such as transmitters.
Basic data delivery through the upper unit and is the computer interface installed by the fax machine. The main function of PG interface is to synchronize the basic data of the upper and lower units through the basic data delivery of the upper and lower units to ensure the coding junctionBe consistent. The PC port is a computer port added to a fax machine. Can be used as a computer printer, scanner.
PC/PG interface is used to select the communication mode of PC and PLC, should also contain the protocol, such as MPI (USB), or TCP and so on. What way do you and PLC connect, here use the selection method, otherwise you can not connect, remember to set the serial port, or IP address and so on.
makes no difference. According to the information about the leakage protector, there is no difference between the pc interface and the pg interface of the leakage protector. The PG/PC port is Yesprofibus. PN/IE is a profinet bus.
WinCC, Kingview, etc. If you have a PLC program, it is basically impossible to force the output directly. Because the program is executing, a loop is refreshed once, and the output is finally located to the program running result. In other words, the PLC program determines the state of the output. But you can change the output by changing the input on the screen, if there are various sensors, switches will be very troublesome.