1. Connect the included power cord to the included AC power adapter. Connect the AC power adapter to the DC input 15 V jack. Plug the power cable into the AC power socket. Charging starts, and the [power] indicator lights up in red. The charging will be completed in about two hours, and then the pilot light will go off. Battery life (when using a BLUETOOTH connection) is about four hours.
2, there are many charging methods for Bluetooth audio, the most commonly used method is to use a USB power adapter or use a charging treasure to charge. makeCharging with USB power adapter: Connect the USB power adapter to the power socket Connect the USB cable to the charging port of the Bluetooth speaker, insert the other end of the USB plug into the USB power adapter to start charging, wait for the Bluetooth speaker indicator to turn green, indicating that the charging has been completed.
3, charging: the audio is connected to the power supply for charging, generally speaking, charging time is several hours. If the battery has been over-discharged, it may take a long time to fully charge. Get over it: If the battery is not too serious, you can wait for a period of time to let the battery recover by itself. This prescriptionThe law requires a certain amount of patience and may require waiting hours or days.
4, Step 1: Charging If you have just bought a SONY Ericsson Bluetooth speaker, the first step is to charge it. Find the charging port on the speaker and charge it with the charger. The charging time generally takes 2-3 hours, and when the speaker is fully charged, the indicator light will change from red to green. Step 2: Turn on the speaker After charging is complete, you can turn on the speaker. Locate the power switch on the speaker and turn it on. When the speaker is turned on, the indicator light will light up.
5, SONY LSPX-S1 Bluetooth audio charging how to use automaticWhen the wireless speaker does not make sound and only the LED lights are in use, the automatic power saving function can consume very little power when using the speaker. If the speaker meets the following conditions and lasts for five minutes, BLUETOOTH standby mode will be activated through the automatic power saving function, and the power consumption is significantly reduced. - The loudspeaker is not operated.
6, the outdoor audio battery is a lithium battery, its charging method should be the same as the charging method of the mobile phone. The battery can not be used up and recharged, so the battery damage is relatively large. When the use of 25 to 30 percent of the time to chargeSpeaker how to charge the phone '>led wireless charger Bluetooth speaker how to charge the phone
1, LED wireless charging Bluetooth speaker to the mobile phone personality audio wireless charging methods are as follows: Ensure that the speaker has been connected to the power adapter personality audio wireless charging , the speaker itself is fully charged. On the speaker find the wireless charging area Personality Audio Wireless charging , on the top or side. Place the mobile phone that supports wireless charging function on the wireless charging area to ensure that the handThe back of the machine is in contact with the charging area.
2, USB charging. Find the audio USB port and plug in the data cable jack end. Plug the charging end of the charging cable into the phone to charge it.
3, as long as personality audio wireless charging your mobile phone supports wireless charging, placed in the middle of the "cross symbol" position can immediately start charging, at this moment, you will see the dynamic aperture of charging appears, convenient and simple! The sweet thing is that when the phone's charge reaches 90%, it will slow down the direct current, thereby extending the battery life.
4, chargeThe electrical method is as follows: Place the charging base: Place the speaker on the charging base. The charging dock will provide a charging area, just place the speaker exactly on that area. Connect the charging cable: Plug one end of the charging cable into the charging port of the speaker. The charging interface is located at the bottom or side of the speaker and can be found according to the design of the speaker. Connect to the charging base: Insert the other end of the charging cable into the corresponding port of the charging base.
5. Charge from U dead port B. You can charge it by connecting it to your phone with the U dead B cable. Planet wireless charger Bluetooth speaker exquisite workmanship, material is also very good, looking at very classy, whiteAlso very durable, the screen can be used as a mirror, the sound quality is also very good. Can listen to music can be an alarm clock, wireless charging. It's so convenient. The sound quality is also very good. You can watch TV on your phone. Voice assistant features.
1, LED wireless charger Bluetooth speaker to charge the mobile phone method is as follows: ensure that the speaker is connected to the power adapter, the speaker itself is fully charged. Find the wireless charging area on the speaker, on the top or side. Place the mobile phone that supports wireless charging in the wireless charging areaMake sure the back of the phone is in contact with the charging area.
2, USB charging. Find the audio USB port and plug in the data cable jack end. Plug the charging end of the charging cable into the phone to charge it.
3, there are many charging methods for Bluetooth audio, the most commonly used method is to use a USB power adapter or use a charging treasure to charge. Charging with USB power adapter: Connect the USB power adapter to the power socket Connect the USB cable to the charging port of the Bluetooth speaker, insert the USB plug at the other end into the USB power adapter to start charging, and wait for the Bluetooth speakerThe indicator turns green, indicating that the charging is complete.
4, as long as your mobile phone supports wireless charging, placed in the middle of the "cross symbol" position can immediately start charging, at this moment, you will see the dynamic aperture of charging appears, convenient and simple! The sweet thing is that when the phone's charge reaches 90%, it will slow down the direct current, thereby extending the battery life.
5, Bluetooth speaker in normal use is not required to connect the battery. Bluetooth speakers can be connected to power via a charger and a power adapter to provide power to the speaker. In addition, some Bluetooth speakers also have a built-in battery, canUse outdoors or without an electrical outlet. When the battery of the Bluetooth speaker is low, it is necessary to connect the speaker to the charger or power adapter for charging.
6. Charge from U dead port B. You can charge it by connecting it to your phone with the U dead B cable. Planet wireless charger Bluetooth speaker exquisite workmanship, the material is also very good, looking at very classy, white is also very durable, the screen can be used as a mirror, sound quality is also very good. Can listen to music can be an alarm clock, wireless charging. It's so convenient. The sound quality is also very good. You can watch TV on your phone. Voice assistant features.
LED wireless charging Bluetooth speaker to the mobile phone personality audio wireless charging The method is as follows: ensure that the speaker has been connected to the power adapter personality audio wireless charging , the speaker itself is fully charged. Find the wireless charging area on the speaker, on the top or side. Place the mobile phone that supports the wireless charging function personality audio wireless charging on the wireless charging area to ensure the handThe back of the machine is in contact with the charging area.
First turn on the power and the indicator light will light up, as shown in the figure. Then turn on the Bluetooth of the phone, as shown in the picture. The phone then automatically detects available devices around it, as shown in the image. After detecting the speaker device, click to start pairing, it takes about 10 seconds to pair successfully, as shown in the figure. Randomly select a piece of music on the mobile phone to play, you can personality audio wireless charging , as shown in the figure.
The connection method is as follows: Turn on the speaker switch and Bluetooth mode: Find the power switch on the speaker,Turn it on. Find the button or function key that is pressed or switched to Bluetooth. It is at the top, side, or bottom of the speaker. Turn on Bluetooth in Phone/Computer Settings: On the phone or computer you want to connect to, go to the device Settings screen. Look for the Bluetooth (or "Bluetooth") option to turn on.
First of all, you need to prepare a 5mm audio cable, plug one end into the audio input interface of the Bluetooth small speaker, and plug the other end into the audio output interface of the headset. In this way, the Bluetooth small speaker becomes a personality audio wireless charging a headset amplifierCan amplify the sound of the headphones, so that we can enjoy the music more comfortably. Next, the Bluetooth small speaker needs to be connected to the power supply through the usb charging interface to ensure its normal operation.
The Bluetooth speaker at the bedside of the hotel is used as follows: Turn on the Bluetooth speaker and make sure that the Bluetooth function of the Bluetooth speaker is turned on. Turn on Bluetooth and make sure Bluetooth is enabled. Open the phone to search for the signal of the Bluetooth speaker, and connect. After the first connection is successful, the next time you turn on the speaker and the phone's Bluetooth, they will automatically pair.