Slide down from the top of the phone screen to bring up the control panel Xiaomi wireless charging structure , and continue to pull down to expand the "Control center" Xiaomi wireless charging structure all functions. In the Control Center screen, swipe left to the last page. Click edit pressButton. Click the wireless reverse charging button. When the button turns blue, it is on. The Mi 11 is a mobile phone under Xiaomi's Mi Wireless charging structure , which was released in Xiaomi Science Park on December 28, 2020 and will be available on January 1, 2021.
Mi 11 The steps to enable wireless charging are as follows: In the phone Settings menu, click "Save power and battery". Open Wireless Reverse Charging on the Battery page. Just put the phone back to back with the device that needs to be charged.
The steps to use millet wireless charging are as follows: Confirm whether the phone is supportedWith the wireless charging function, you can view the relevant information in the Settings of the phone, enter the Settings, battery and performance, wireless charging, wireless charging options appear, indicating that millet wireless charging equipment supports wireless charging function. Get a wireless charger that supports the Qi standard.
Applicable brand model: Mi 11 Mi wireless charging structure ; System: miui15; Connect the data cable to the wireless charger, then plug it in, and plug it in. Then place the Mi 11 phone in the center of the wireless charger, and it will show that the phone is chargingIntroduction '> Introduction to the principle of Mi 11 air separation charging technology
What is the principle of air separation charging: The technical principle of air separation charging is released from the energy source, and the fixed frequency of the radio wave and the mobile phone receive frequency match, so as to transmit electric energy and charge. Due to the power loss efficiency of this technology is about 70%, but the stable power of 5 to 10w is already the limit.
The principle of Mi 11 air separation charging is to use magnetic resonance wireless charging technology. Magnetic resonance wireless charging technology is a kind of wireless charging method based on magnetic resonance principle. Separated by Mi 11In no-charge technology, the charging device emits a magnetic field of a specific frequency, and the phone has a corresponding receiving coil built in.
The core of millet's air separation charging technology lies in accurate spatial positioning and energy transmission. The self-developed air separation charging pile has 5 built-in phase interference antennas, which can lock the position of the mobile phone with millisecond accuracy. Through the phase control array composed of 144 antennas, the beam forming technology is used to accurately transmit the millimeter wave to the mobile phone.
The essence of this technology is the commercial application of the principles of electromagnetic induction in physics. The so-called principle of electromagnetic induction refers to a part of the closed circuitWhen the body cuts the motion of the magnetic inductance line in the magnetic field, the conductor will generate current, which is called electromagnetic induction phenomenon. The current generated by electromagnetic induction in the closed circuit is called induced current. It is the inductive current that replaces the alternating current transmitted by the power adapter to complete the mobile phone charging process.
The principle of millet air charging technology: the core is spatial positioning and air energy transmission. The self-developed air separation charging pile has 5 built-in phase interference antennas, which can conduct millisecond spatial positioning of the mobile phone and accurately detect the location of the mobile phone. A phase control array of 144 antennas directs millimeter waves through beamformingSend it to the phone. On the mobile side, Xiaomi has self-developed the miniaturized design of the antenna array, with built-in beacon antenna and receiving antenna array.
2,First, gently swipe down from the top of the phone screen to open the Control center, then continue to pull down to expand all the features. Next, look for the "Wireless backcharge" option on the Control Center page. Click the "Wireless backcharge" option, when the button color turns blue, it means that the wireless charging function has been successfully turned on.
3, Mi 12 wireless charging coil is fixed between the main and secondary board covers. Millet 12 uses a small inductance coil to sense the sending end energy, millet small inductance charging scheme uses the receiving coil, the inductance value is only about 1/3 of the traditional scheme, under the same conditions, the loss can be reduced to half of the traditional coilUp.
4, to turn on the wireless charging function for the Xiaomi phone, you can follow the following steps Xiaomi Wireless charging structure : Scroll down from the top of the screen, open the control center, and continue to pull down to expand all control options. Slide on the left side of the Control Center page until all features are displayed. Click the "Edit" button to modify the feature Settings. Select the "Wireless Reverse charging" option and turn it blue to indicate that the function is enabled.
5, slide down from the top of the phone screen to bring up the control panel, and continue to pull down, expand the "Control.The full function of the heart. In the Control Center screen, swipe left to the last page. Click the Edit button. Click the "Wireless reverse charging" button. When the button turns blue, it indicates that it is on. Note Xiaomi wireless charging structure : This article applies to the MIUI11 system of Xiaomi 10pro mobile phone.
6, the steps to use millet wireless charging are as follows: Confirm whether the mobile phone supports wireless charging function, you can view the relevant information in the Settings of the mobile phone, go to Settings, battery and performance, wireless charging, wireless charging option appears, indicating that millet wireless charging device support noneLine charging function. Get a wireless charger that supports the Qi standard.
1, Mi 12 wireless charging coil is fixed between the main and secondary board covers. Millet 12 uses a small inductance coil to sense the sending end energy Millet wireless charging structure , millet small inductance charging scheme uses the receiving coil Millet wireless charging structure , the inductance value is only the traditional schemeAbout 1/3, under the same conditions, the loss can be reduced to more than half of the traditional coil. On the back of the phone. The Mi 13 wireless charging is located on the back of the phone, the same as the wireless charging coil on most mobile phones.
2, according to Zhongguancun Online, xiaomi12su wireless charging coil is located in the middle of the back of the mobile phone, close to the back cover of the mobile phone, the mobile phone needs to be placed on the wireless charger when using the wireless charging function.
3, the back cover of the phone. Millet wireless charging structure He is in the back of the phone with most of the positionIt can be said that the position of the induction coil for wireless charging of most mobile phones is basically in the back cover, and it will not be placed in other positions, because the top of the phone will also put nfc.
4, the wireless charging coil is in the back plane, the transparent back cover, you can see the coil position. Xiaomi has 19 built-in coils, each of which supports 20W wireless charging, and can choose the right coil according to the placement of the product. pro coils are covered on both sides of the battery. Wireless coils are connected to the battery, the vast majority of them around the battery, placed in the wireless charging device can be charged.
5, wireless charging coil at the back, transparent back cover, you can see the position of the coil. Xiaomi has 19 built-in coils, each of which supports 20W wireless charging, and can choose the right coil according to the placement of the product. Therefore, whether it is placed vertically, horizontally or diagonally, the millet multi-coil wireless fast charging board can almost achieve pairing and charging.
6. Enable the wireless charging function. The wireless charging coil is located in the backplane, and the transparent back cover allows you to see the position of the coil. Xiaomi has 19 built-in coils, each of which supports 20W wireless charging and can be selected according to the placement of the productSelect the right coil. The Mi 11 wireless charging position is in the middle of the back cover of the phone. The device with wireless charging function conforming to the Qi standard is placed in the center of the wireless charger, and the charging will automatically start.
1, the wireless charging coil is in the back plane, transparent back cover, you can see the position of the coil. Xiaomi has 19 built-in coils, each of which supports 20W wireless charging, and can choose the right coil according to the placement of the product. pro coil covered inBoth sides of the battery. Wireless coils are connected to the battery, the vast majority of them around the battery, placed in the wireless charging device can be charged.
2, pro coil covered on both sides of the battery. Wireless coils are connected to the battery, the vast majority of them around the battery, placed in the wireless charging device can be charged. Xiaomi 11Pro introduces silicon oxide negative battery for the first time, the battery capacity is directly increased to 5000 mah, and supports wired + wireless 67w flash charge, which can be fully charged in 36 minutes, wired and wireless as fast, battery life, and fast charge are reassuring.
3, Mi 11 wireless charging position in handMiddle of the rear cover. The device with wireless charging function conforming to the Qi standard is placed in the center of the wireless charger, and the charging will automatically start.