1, mm thick Wireless baffle board Of the wooden board. In general, the thickness of the wood penetrated by wireless charging will not exceed 8mm, which is the maximum charging distance of the traditional Qi standard. The thickness of wood that wireless charging can penetrate depends on the specific device and technology, and can penetrate at least 8mm thick wood.
2, the middle wood has no effect. Wireless charging is transmitted to the charging device in the form of antenna electricity. Because radio waves can penetrate the board, the board can be filled. Because the wireless charging is ultra-short wave, the radio wave length is very short, the loss in the transmission process is large, and the transmission distance is very close. The use of thicker wood will have a poor charging effect, and thicker wood willAffect charging.
3, wireless insulation board Hello, there are electric double stove stove on the market, the left is the gas stove, the right is the induction cooker. Wireless board I think this kind of stove should be suitable for you. You can refer to it.
4, cat nest board with about 20mm. Thickness of about 20mm should meet the light weight, heat insulation, sound absorption, corrosion resistance. Wooden cat nest this can be customized according to their own design needs, wood board is divided into several environmental protection and so on. If the phone case is too thick or unreasonable design, it may have a certain impact on the efficiency of wireless charging.
The phone case will affect the wireless charging efficiency of the phone. Qi wireless charging has requirements for charging distance, and the maximum charging distance is only 10 mm. This is a bit "blocking" for Chinese mobile phone users who like to use mobile phone cases, although there is no need to remove the mobile phone case, the thickness of the mobile phone case has requirements, and some charging plates are marked, and the thickness of the protective case should not exceed 3 mm. Since most smartphones that support wireless charging use Qi wireless charging standard technology.
Wired charging: Wear a mobile phoneThe shell will not affect the charging, if the ambient temperature is high, it may affect the heat dissipation, at this time you can take off the phone shell and recharge; Wireless charging: the standard protective shell of the mobile phone has no effect on wireless charging. If other protective shells are used, it is recommended to remove the protective shell and then wireless charging the mobile phone. Note: The metal protective shell will interfere with the wireless charging signal and affect the wireless charging function.
1, millet 11 space charging has an impact on the body: millet 1The air charging function of 1 has no effect on the body. Xiaomi has done a good job of protection before the commercial use of space charging technology, so the amount of radiation brought is very small, and there will be no radiation danger. And the power of this function is also very low, only about 5~10w, so there is no need to worry about excessive radiation.
2, millet 11 space charging radiation: in theory, as long as it is charging, there must be radiation even if it is space charging. Xiaomi's air separation charging technology can not be affected by foreign bodies. And it doesn't need to be fixed, and it can be charged wirelessly anywhere. Small before commercial roleMeters have done a good job of protection, can give you good protection.
3, electronic products have radiation, but you have to rest assured that millet air separation charging technology is not only tested by millet company, but also recognized by the state will be listed, the amount of radiation is safe.
4, millet space charging technology is coming, it does have a certain radiation, but it can meet some of the vanity of science and technology fans.
mm thick board. In general, wireless chargingThe thickness of the board will not exceed 8mm, which is the maximum charging distance of the traditional Qi standard. The thickness of wood that wireless charging can penetrate depends on the specific device and technology, and can penetrate at least 8mm thick wood.
This depends on the thickness of the board, the density and the transmitting power of the remote control. First, thin wood panels usually have some transparency to infrared signals (commonly used in most remote controls), so if the board is relatively thin, the remote control signal can penetrate and control the set-top box. In general, boards thinner than 1/8 inch (about 3 mm) usually do not significantly reduce the infrared signal. Also, the board is denseThe degree also affects the transparency of the signal.
Believe that many people's mobile phones have the habit of shell, we use 1mm thick PVC plate to simulate the material of the mobile phone shell, see a few layers of wireless charging failure, the results are as follows: the penetration ability of wireless charging is good or bad, Xiaomi and Huawei perform best, followed by 360, Times and green link penetration ability is the weakest, basically positive correlation with the price.
Middle wood has no effect. Wireless charging is transmitted to the charging device in the form of antenna electricity. Because radio waves can penetrate the board, the board can be filled. Because the wireless charge uses ultra-short wave, radio waveLong is very short, the loss in the transmission process is large, the transmission distance is very close. The use of thicker wood will have poor charging effect, and thicker wood will affect charging.