1, Note: It is recommended to hold the charging base to the watch buckle luminous wireless charging watch , the side of the watch with the button and the charging port of the charging base keep the same direction. After placing the luminous wireless charging watch , check the charging icon on the watch dial, if the charging icon has been displayed, it indicates that it is being charged. If the charging icon does not appear, you need to adjust the position slightly to ensure the fit until the charging icon appears. The watch is connected to the power supply after the low power shutdown, and the watch will automatically turn on soon after charging. The watch will be at 2Fully charged within hours.
2. Connect the charging base to the power supply and place the watch on the charging base. Align and fit the charging port on the back of the watch with the metal contact of the charging base, and adjust the fit until the charging indication appears on the watch screen. The charging indicator shows 100% indicating full charge, at this time the watch will detect and automatically stop charging. Disconnect the charger when fully charged.
3. Connect the USB-C interface and the power adapter of the wireless charging base using the dedicated base charging, and then connect the power adapter to the power socket. Place the watch on the wireless charging base. backwatchAlign the charging port, fit the charging base, adjust the fit until the watch screen appears charging instructions. After the watch is fully charged, the charging indicator shows 100%, at this time, the detection judgment automatically stops charging.
Put under a strong energy-saving lamp can increase the brightness. Luminous coating (luminous material) : a new generation of luminous raw materials, smeared on the hands and dial, illuminated by daylight during the day, electrons transition to high energy levels, absorbing energy; At night, electrons transition from high energy levels to low energy levels, emitting light without radiation.In this way, the time can be read by distinguishing the pointer in the absence of light.
Do you want to ask the Rolex watch noctilucent sometimes not bright reason is it? The reason why Rolex watches are sometimes not bright is that Rolex watches do not get sunlight or light exposure, and for a long time in this dark environment, luminous watches will not be bright. If the watch is not luminous, it needs to be filled with light. You can use a mobile phone flashlight or flash for a while, you can also use an ordinary flashlight to illuminate the dial for a while, you can have a luminous effect.
-5 hours. Rolex watch glow-in-the-dark needs to absorb light 3-5Hours, mainly because the luminous material needs to absorb 3-5 hours to absorb enough light energy to stimulate a strong luminous, this luminous material is usually a light storage type luminous material, can absorb the light, store it, and then release the stored light energy in the dark, emit a weak light.
Now some brands, such as Ball still use tritium gas pipes. The tritium gas pipe is coated with a thin layer of zinc sulfide on the inner wall of the glass tube, and then filled with tritium gas. The tritium gas in the tube causes the zinc sulfide to glow continuously, which can last up to 20 years. And the glass tube is filled with tritium gasThe greater the pressure, the brighter the glow. Of course, this technology also has radiation, but regardless of the dose to talk about harm is a rogue.
Watch wireless charger use method is as follows: Connect the wireless charger to the USB power adapter. Place the watch on the wireless charger, ensuring that the center of the back of the watch is aligned with the center of the wireless charger to charge. The wireless charger is a device that uses the principle of electromagnetic induction to charge, and its principle is similar to that of a transformer, by placing it at the sending and receiving endsA coil.
First, check that the charging base and the charging interface of the watch are clean and in good contact, ensuring that the connection between the two is free of any dirt or moisture interference. Secondly, pay attention to whether the temperature of the watch is appropriate. Too high or too low a temperature can hinder the charging process. If necessary, move the watch to a ventilated position and wait for its temperature to return to normal before attempting to charge it. The third step is to check whether the power supply voltage is appropriate.
Plug one end of the charging cable into the charging port on the back of the watch, then plug the other end into the power outlet, turn on the power switch to start charging. On chargeDuring the process, ensure that the temperature of the watch is appropriate, avoid charging in a high temperature environment, and try to avoid using or charging the watch in a humid environment.
The Apple Watch uses a MagSafe-style wireless charger, which attaches to the back of the Apple Watch by magnetic force and then charges induction. Simply hold the joint close to the back of the watch and the magnet in it will automatically snap the joint into place. Apple Watch has wireless charging function, it is Apple's first mobile device with wireless charging function. Apple Watch is full at a timeIt lasts up to 18 hours and needs to be recharged every night.
Use magnetic charging base, use wireless charger. Using a magnetic charging dock: Place the AppleWatch Magnetic charging dock into a USB-C cable or the AppleWatch Magnetic charging cable on the back of the AppleWatch. The concave surface of the charging cable is magnetically correctly attached to the back of the AppleWatch. When charging begins, the AppleWatch will play an alert tone (unless the watch is in silent mode) and display a charging symbol on the watch face.