1, Philips shaver charging indicator description divided into different models Philips wireless charging blue : RQ1290/RQ1280 When the shaver is charging Philips wireless charging blue , the minute indicator will flash. Shaving time will continue to increase Philips Wireless charging blue until the razor is fully charged. Fast Charging Philips Wireless Charging Blue : When the shaver contains Philips Wireless Charging Blue When the battery is still enough to shave once, the display will show red for 5 minutes. When the battery is fully charged, the minute indicator will continue to light.
2, the first bottom light flashes, and then continues to light up, indicating that the product is charging. Then a second light flashes, then continues to light, and so on until the product is fully charged. Battery charging indicator (Level 1 indicator) Fast charging: When the product contains insufficient power to complete a shave, the battery charging indicator flashes quickly. When the battery charging light starts to slowly blink, the amount of power contained in the product will be enough to complete a shave.
General Bluetooth headset full charge takes 2 to 3 hours, full can be, do not need more charging. When the Bluetooth headset is fully charged, the indicator light will light blue or red. If the Bluetooth earphone is charging, the Bluetooth earphone will keep flashing red, and the red light of the Bluetooth charging bin will flash when charging, and it will keep flashing after being fully chargedRed light. When the Bluetooth headset is almost out of power, it flashes red and reports an alarm every ten seconds.
General Bluetooth headset charging takes 2-3 hours, fully charged Bluetooth will have a blue indicator on. Bluetooth headphone charging precautions are as follows: The first time a new Bluetooth headphone is fully charged, it does not need to be charged for too long. Inside the Bluetooth headset is a 7V 150-500mah lithium-ion battery, lithium-ion batteries do not have a memory effect like nickel-cadmium batteries, so no matter what time it is charged, it will not affect the use of the battery too much.
General Bluetooth headset charging to 2 toThree hours. Under normal circumstances, the new headset is generally charged in about 3 hours, do not charge the time is more than 3 hours. The headphones that have been used are about 2 hours, of course, the best thing to do when charging is that you can look at it, and the headset light turns from red to green directly unplug the power supply, which is the best. If you don't have time to watch it, just charge it at this time.
A new Bluetooth headset can be fully charged for the first time, and does not need to be charged for too long. Bluetooth headset internal 7V 150-500mah lithium-ion battery, lithium-ion batteries do not have a memory effect like nickel-cadmium batteries, soNo matter what time it is charged, it will not affect the use of the battery too much.
In order to fully activate the battery, charge the first three times for 6-8 hours. After each charge 2-3 hours can be. When charging, it is generally a red light, the headset is full of blue lights or green lights, and some of the lights are long after being fully charged.
Charging with a charging cable: First, find the charging interface for a wireless mouse, usually located at one end of the mouse. After confirming the position of the interface, open the mouse and insert itThe charging cable. When the mouse starts charging, the indicator light will light up, indicating that it is charging. Do not turn off the power switch of the mouse while charging. After charging is complete, the indicator light will change from red to green, indicating the end of charging. The whole charging process usually takes less than five hours.
After finding, you need to turn on the wireless mouse, insert the mouse charging cable into the jack, and then directly start charging when the mouse starts to charge, the mouse light will be lit, indicating that it has started charging. Be careful not to turn off the Infinity mouse switch during this process. The second is to replace the battery, which is recommended by Xiaobian. Open the mouse directlyMark the back cover, and then replace the battery.
First put the switch at the bottom of the wireless mouse to the on side. Plug the data cable into the front of the wireless mouse. Then plug the data cable into the socket and you can see the light at the bottom of the mouse. Be careful not to turn off the mouse switch during charging. Tip: There are also some wireless mouse battery, need to change the battery can.
When charging using the mouse or USB, the color of the indicator will change from red to green after the charging is complete, indicating that the charging is complete. Usually the charging time will not exceed 5 hours, please note. If it's Logitech, ThorOther brands of mice, you can directly view the power of the mouse through the driver. For a mouse that uses batteries, it is fully charged after replacing the new battery.
Find charging hole Wireless mouse is rarely charging, before charging to find the wireless mouse charging hole, generally wireless mouse charging hole in the most front end of the mouse, see whether the most front end has a 1cm or so charging hole. Insert the charger to adjust the switch at the bottom of the wireless mouse to ON, and then use the mouse charging cable to insert the front jack of the wireless mouse, and the other end of the jack should be inserted into the electrical jack such as the strip.
The remaining power of the Philips shq6500 headset can be judged according to the decrease of the power symbol of Philips Wireless charging blue in the battery icon. When the power symbol drops to the bottom Philips wireless charging blue , indicating that the earphone battery is extremely low Philips wireless charging blue , need to charge the headset. If the phone's notification bar does not show the headset battery information, you can also judge by the status indicator of the Philips shq6500 headset, which flashes blue light when the headset is in normal use.
When the Philips shq6500 headset is off, long press the multifunction button of the headset for about 2 seconds until the headset indicator lights up blue, indicating that the headset has been turned on normally. When the headset is off, long press the multifunction button of the headset for about 5 seconds until the headset indicator light flashes white and blue alternately to enter the pairing state. mentionIf the headset cannot be turned on, charge the headset battery first.
When you buy a Philips shq6500 headset, you will receive a micro USB charging cable for charging along with the box. Connect the included micro USB cable to the Philips shq6500 headphone charging port, then connect the other end to a booted computer or USB power adapter to the power supply.
Press and hold the multifunction button of the Philips shq6500 headset for about 5 seconds until the indicator light on the headset flashes white and blue alternatelyEnter the pairing state. At this time, the name of the Philips shq6500 headset will appear in the Bluetooth device search list of the iPhone. If not, please try to refresh the Bluetooth function interface. Select "PHILIPS SHQ6500BL" from the device name option and follow the instructions shown on your iPhone to pair the connection.
After playing music on the phone, you need to pause the music by pressing the multifunction button on the Philips shq6500 headset; Press the multifunction button again to resume music playback on the headset. Philips shq6500 earsWhen the music volume is not enough, you can press the "" button to increase the music volume. Long press the "" button on the headset for about 2 seconds to switch to the next song.
The Philips SHQ3200 features adjustable ear hooks that keep music firmly attached to your ears, whether you're running outdoors, on a crowded subway, or exercising hard.