1, hello, the efficiency of wireless charging is fast and fast, depending on the mobile phone itself does not support the fast charging protocol. Bex has a wide range of wireless chargers(There are fast charges and ordinary 5W charging). If your mobile phone wireless charging function itself supports wireless charging fast charging protocol, and uses a fast charging wireless charger, it is very good to charge.
2, must use the mobile phone original wireless charging can be faster. The charging effect of the mobile phone depends on the charger, but also related to the charging cable and the mobile phone. In terms of chargers, the general charger will have a built-in smart chip, which can identify the current and voltage required to charge the phone, and then adjust the current and voltage within the safe range of the phone.
3, all wireless chargers of Bex areThe QI standard protocol is supported. The output power of the wireless charge is 5W.
4, if wireless charging is used, then there is no exposed connector for wireless charging of electric vehicles, so as to completely avoid safety hazards such as leakage and electricity running. And the use of wireless charging, you can hide the power and transformer in the ground, so that the car in the parking place or special charging points on the street, so wireless charging is very convenient.
5, wireless fast charge is not very fast, nor very slow. Wireless fast charge is much faster than wireless fast charge, and slower than wired fast charge. Power output from the charging head wired to the wireless fast charging base,Not wireless fast charge output power but wireless fast charge input power. Charging time of more than 2 hours of wireless fast charge, not as fast as the wired fast charge of 1 hour and 30 minutes, is not fast charge. Unexpectedly, the wireless fast charging efficiency of 60% when the 18W is charged for 2 and a half hours.
6, green wireless charger: Type-C interface fast charging, magnetic design is convenient and stable, QI standard to ensure safety, is an ideal choice for efficient life. Bex wireless charger: cost-effective, 15W charging, strong suction and user-friendly design, even game enthusiasts can easily use. Multi-in-one style wise three-in-oneCharger: 22W wireless fast charge, strong compatibility, dual core design to ensure low loss, intelligent heat dissipation makes charging more secure.
1, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Check whether the center of the mobile phone is placed in the center of the wireless charging base during chargingAnd remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
2, please check the phone back shell. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
3, in order to ensure that your sleep environment is quiet, it will automatically enter the silent charging state, and the fan speed will be reduced. During this time, the phone/charging pad is smartAdjust the wireless charging power to charge slower than the rest of the day. Huawei this 50w fast charge after 9 o 'clock automatic slow down silent charging, after 7 o 'clock in the morning the speed is normal, before I thought it was bad, who knows there are such rules, mainly can not close this restriction is the most uncomfortable.
4, at this time should pay attention to whether there is a metal object placed on the wireless charger, please take it off and charge again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings. Make sure you use the official charging head. Second, look carefully at the wireless charging instructions and encounter metal differencesNear the object, it will automatically cut off the wireless charging, and continue to flash the green light, and return to normal after the power failure.
5, if the interface is loose, the light will keep flashing. There is a problem with the charger. If the above two cases are not a problem, then there may be a problem with the charger itself and it needs to be replaced or repaired. If you encounter the situation that the millet wireless charger light has been flashing, you can first try to adjust the distance between the charger and the phone, or check whether the interface is loose. If the problem still exists, it is recommended to contact Xiaomi customer service or go to a professional electronic repair shop for repair.
6, please check the wireless chargerMultiple interfaces, but do not necessarily support the fast charge function, so the fast charge cannot be activated when in use. Secondly, it may be that the charging interface of the phone or device does not match the interface of the charger.
2, battery aging Wireless charging can not be fast charged : The charging treasure is used for too long, the battery aging leads to a reduction in capacity, can not be fully charged. (2) Outlet failure: The power bank outlet is damaged or poorly connected, resulting in unstable output current. (3) Input port failure: The charging bank input port is damaged or poorly connected, resulting in unstable charging current. (4) Charging power supplyObstacle: The failure of the charging power supply of the charging bank may cause the charging current to be unstable or unable to charge.
3, the reasons are as follows: the data line is in poor contact, it is recommended to use a new line or use the original data line. The output current is too small, you can use the 2A adapter to charge the power bank. The power supply of the charging treasure is excessive, resulting in no charging, with both ends of the usb port of the line, one end of the power supply outlet, one end of the computer u port for one to three minutes, you can activate. Check the ports, circuit boards, and batteries of the charging bank.
4. The interface is damaged. Bex wireless charging magnetic data cable connector is damagedThe contact between the magnetic charging head and the charging cable is poor, or the interface has been damaged, and a new magnetic charger needs to be updated. The charging cable adopts a magnetic connection mode, which can be easily and quickly connected and disconnected.
5, many users for the first time to use the mobile phone wireless charging function may occur when the mobile phone can not be charged, generally the reason for this situation may be that the mobile phone is placed on the charging board is not correct or the charging device is not powered on. First of all, confirm whether the mobile phone model supports wireless charging function, (you can find mobile phone information on the brand's official website) checkSee if the indicator light on the charging pad is on.
After Huawei p30pro is connected to the mobile power supply, the protocol interaction takes about 10 seconds. A slight delay is normal. If the data cable is inserted too slowly, the protocol interaction may be abnormal, resulting in a fast charge exception. It is recommended to plug in the data cable again. Please confirm whether youUse Huawei standard data cables. In order to ensure charging safety, you can only enter the super fast charge mode after using Huawei standard data cable.
Super Fast charge: The icon is dual lightning, and the maximum output parameters of the standard charger are 10V/25A, 5V/5A or 5V/5A, 10V/4A, 5V/8A, 20V/25A, 11V/6A. 2, if your device supports fast charge (or super fast charge) mode, but the normal charge icon (or fast charge icon) is displayed when charging (1). You are advised to use the charger and data cable recommended by Huawei.
Huawei p30pro takes about 10 seconds to perform protocol interaction after connecting to the mobile power supply, and a slight delay is normal. Too slow to insert the data cable may cause protocol interaction abnormalities, resulting in fast charging abnormalities. It is recommended to reinsert the data cable. Please confirm whether you are using Huawei standard data cable. To ensure charging safety, you can enter the super fast charge mode only after using Huawei standard data cable.
Wireless charging: Support 50w According to the model data, wired charging is to support 10V /25A, that is, 25W standard charging mode, and 5V/5A 25W charging mode, the maximumThe possibility is that 25 watts of this power is not a super fast charge for 40pro, only ordinary charging. The same is true for the Max 65-watt charger I used, and when I used the 33-watt tablet charger, the Super fast charge was not prompted.
Romeshi charging bank to display or not actually use the led indicator and the display digital display, the final function is the same, but the led indicator function is relatively simple, the LCD display data more points, coupled with digital intuitive, relative to the display better. The main charging treasure is still to see the functionality, such as support for fast charging, support for two-way chargingElectricity, these functions are more practical.
1, the charging treasure suddenly can not fast charge BX wireless charging can not fast charge The reason is that the charging treasure fault or charging line fault. Charging treasure suddenly can not fast charge Wireless charging can not fast charge The reason is: charging treasure failure, resulting in normal fast charge, charging treasure suddenly can not fast charge. The charging cable is faulty and cannot transmit power normally, resulting in chargingPowerbank suddenly can't charge fast.
2, times thought charging treasure for a while to stop themselves Times thought wireless charging can not be fast reasons for the following possible. The output voltage of the charging bank is insufficient. This is determined according to the principle of charging, it must be high voltage flow to low voltage, the mobile phone is generally 7V, the mobile power supply lithium battery is 7V, so it is flat, so the mobile power supply will be boosted to 5V when the output voltage, so that high voltage flow to low voltage, charging.
3, charging treasure input charging, first unplug the charging cable, and then unplug the chargerTurn it on and leave it for a few minutes. Plug in the charger, then the cable. Try it. Unplug the cable and then the charger. Repeat twice. Try it. It may take a long time to charge the charger, the charger continues to be hot, the charger fast charging mode is damaged, and the ordinary mode can be normal by default.
4. Input port failure: The charging bank input port is damaged or poorly connected, resulting in unstable charging current. (4) Charging power supply failure: The charging power supply failure of the charging treasure may cause the charging current to be unstable or unable to charge. How to solve the problem that BSI charging treasure can not be charged BSI wireless charging can not be fastCharge (/strong)? If the power bank can not be charged, you can try the following methods: (1) Replace the charger: If the charger fails, you can replace the charger.
5, there is no fast charge. In the power bank of Beisi, there is no fast charge logo. Mobile phone charging bank, also known as mobile phone mobile power supply, mobile power supply, is a portable charger that integrates power supply and charging functions, which can charge mobile phones and other digital devices anytime and anywhere or standby power supply.
In Settings. realme Power Bank enables fast charge in Settings.
In order to solve this problem wireless charging can not be fast charging , first of all, you need to ensure that the charger used supports fast charging. You can check the specifications and instructions of the charger to confirm whether it supports fast charging. Second, wireless charging can not be charged fast , to ensure that the charger interface matches the interface of the device. If it does not match Beisi wireless charging can not be charged fast ,You can try using an adapter or replacing the charger. In addition, it is also important to choose high-quality charging cables and charging heads, and certified brand products can be selected to ensure charging quality and safety.
There is no fast charge. In the power bank of Beisi, there is no fast charge logo. Mobile phone charging bank, also known as mobile phone mobile power supply, mobile power supply, is a portable charger that integrates power supply and charging functions, which can charge mobile phones and other digital devices anytime and anywhere or standby power supply.
To turn on Super Fast charge mode, you first need to make sure that your phone or device supports the feature andAnd has been equipped with the corresponding charger and data cable. The exact steps to turn on Super Fast charge mode may vary by device and brand.