1, the reasons for repeated disconnection of iphone charging are as follows: the charger or data cable is not original: replace the original mobile phone data cable and the originalInstall a charger and charge it again. Voltage is not enough: It is recommended to change the jack, or turn the screen brightness of the phone to the darkest, and then plug in the charger. Poor contact between the charging cable and the interface: If the power is off during frequent charging, you can pad the data cable with toilet paper or other paper, or replace it with a new charging cable.
2, the mobile phone data cable connector has stains, resulting in bad contact. The power is not plugged in, or the data cable is not plugged into the phone port. The use of non-original charging head or data cable, resulting in unstable mobile phone charging. The power component of the mobile phone is faulty.
3, Apple charge to break the possible originalThe reasons are: The phone data cable connector has stains, resulting in bad contact. The power is not plugged in, or the data cable is not plugged into the phone port. The use of non-original charging head or data cable, resulting in unstable mobile phone charging. The power component of the mobile phone is faulty. It is recommended to replace the Apple data cable and charging head and try again, if it still does not work, you need to take the phone to the factory maintenance point for testing.
There is a problem with the charger or charging cable, there is a problem with the phone battery. rechargerOr there is a problem with the charging cable: Make sure you are using an Apple certified charger and charging cable, and check for damage or wear. Mobile phone battery problems: Mobile phone battery has been aging or damaged, will also cause wireless charging can not work properly, the battery needs to be replaced.
Take iPhone13 as an example, Apple mobile phone wireless charging may be caused by network problems, try to restore all Settings to try. Divided into 3 steps, the steps are as follows: 1 Enter the Settings General! --1 Step 1 Go to the Settings General tape Step 1, Step 2 style -- Open the phone Settings icon and click General Options.
Poor connection between charging base and power supply: Make sure your charging base is properly connected to the power supply. If the charging dock is poorly connected, your device may not be able to charge. Charging dock issues: Make sure your charging dock is certified and compatible with your device. If you are using an incompatible charging dock, it may result in an inability to charge.
Whether the power adapter input to the wireless charger is normal. (2) Check whether there is bad contact inside the entire charging data cable. 3, check the charging data cable plug and wireless charger input interface between the twoData cable, or replace with a new charging cable.
2, may be the bottom of the phone charging interface dust, resulting in poor contact between the interface and the power cord plug. Try closing it and opening it again. It could be a system problem that prevents the phone from charging. There is also the issue of temperature. If the data cable or charging head is not original, it will always be powered off. It is recommended not to buy unprotected copycat products. Check whether the bottom port of the mobile phone is blocked by foreign objects.
3. The reason is that the socket or socket board is damaged. The data line is pulled or bent excessively during use, resulting in poor internal contact of the data line. Mobile phone charging portA fault occurs. Note: Please use the official standard charger to charge the battery to ensure that the charging voltage is stable and meets the standard. In theory, keeping the battery power in the middle range of power for a long time (about 50%, such as 30%-70%) is more helpful to extend the battery life.
4, the voltage is not enough: it is recommended to change the jack, such as originally plugged in the computer charging, change to the socket. Charger or data cable is not original: replace the original phone data cable and the original charger and then charge. Check that the room temperature is not too low: Apple has a low temperature protection for iPhone batteries, which can sometimes be too lowWaiting for the phone will not be able to charge, to prevent the formation of deposits in the battery, resulting in an internal short circuit of the battery.
5, the reasons for the frequent flash break of Apple mobile phone charging are: it may be that the charging interface at the bottom of the phone is grey, which causes poor contact between the interface and the power cord plug. Try to turn off and then turn on, it may be the reason of the system, resulting in the phone can not charge. Then there is the issue of temperature. If the data cable or charging head is not original, there will be power failure all the time, it is recommended not to buy non-guaranteed fake products.
6, is to protect the battery life, some mobile phones because of the use of strongDegree, length of use, different charging methods. There is a direct harm to the mobile phone battery, so many mobile phones are set up smart charging mode to extend the service life of the mobile phone.
Check the charging cable and USB adapter for signs of damage, such as broken or bent pins. * Do not use damaged parts. Use wall power outlets and check charging cables, USB wallsWhether the connection between the adapter and the wall outlet is strong, or try another outlet. Remove any debris from the charging port at the bottom of the device, then plug the charging cable tightly into your device.
For non-original charger, it is easy to charge no power, because the charger specifications are not up to standard, replace a qualified charger. Please check whether the data cable is normal. The data cable looks normal on the outside, but it may have been broken inside.
The solution of the Apple phone is not charged: check the charger fault, clean the charging port, and overhaul the battery. Replace the charger or charging cable: Check the chargerWhether the charging cable is significantly damaged or worn. If you find problems, replace the charger and charging cable to test. Clean the charging port: Sometimes the charging port will be blocked by dust or other debris, causing the wire to not be inserted into the charging port.
Recharge: Try to reconnect the phone to the charger or computer to continue charging and wait for the power to return. Check the battery condition: If your phone's battery lasts a long time and its performance deteriorates, consider replacing it with a new battery. Restart the device: Hold down the power button and swipe the on-screen "Off" button to restart the phone. Restore factory Settings: If the preceding steps failTo resolve the problem, you can restore factory Settings.
When the iPhone is not charged, you can follow the following steps to troubleshoot and solve: Check the power supply and charger: Make sure that the socket is connected to the power, you can plug in other electrical appliances to confirm whether there is power. Try to replace the socket or charger, there may be a loose socket or charger failure caused by charging problems. Check the charging cable and adapter: Replace the charging cable and adapter to rule out the possibility of damage to the charging cable or adapter.
The reasons and solutions for Apple mobile phone can not be charged are as follows: The first point: because we are used to handlingThe machine is in the pocket, and the charging interface located at the bottom of the phone is easy to enter the ash, which causes poor contact between the interface and the power cord plug. Therefore, when the mobile phone cannot be charged, please first check whether the interface at the bottom of the mobile phone is blocked by foreign bodies.
1, high temperature high temperature protection or there is a metal foreign body between the mobile phone and the charging treasure, or the charging treasureOr your phone doesn't work.
2, because millet's wireless charging treasure may charge frame number and charging frequency and your Apple eight p mobile phone charging frequency is not in a band. So in a few seconds it will automatically shut down and you can rematch your phone and then charge it.
3, the mobile power supply is a third-party charging device, so it will be compatible with the mobile phone, the official recommendation is to use the original charger to charge the mobile phone, which can better protect the service life of the mobile phone and battery. If the purchased third party mobile power supply cannot be used, then it may be caused by compatibility problems, please contactDealer handling.
4, this is because the mobile power into the charging protection state. When charging the mobile phone, overcharge or high voltage will make the mobile power into the charging protection state, this time to charge the mobile power is not charged.
5, insufficient charging treasure output when the insufficient charging treasure meets the charging current of the mobile phone, the chip will overheat start overload protection and power off, re-charge can be restarted, but it will still charge the power off, the solution is to change a thin data cable, preferably iron core wire, so that the charging current will be reduced, charging timeCan be extended, even charging bank no longer activated overload protection.
Charging dock or charger issues: If you've made sure your device supports wireless charging and you've turned on the option, but still can't use wireless charging, check that the charging dock or charger you're using is compatible and places your iPhone correctly. Make sure the base or charger has the Qi wireless charging standard, and make sure your phone is properly placed on the base, so that the phone and the charger are connectedA wireless charging connection can be established.
Wireless charging accessories damaged, foreign body blocking, etc. Wireless charging accessories damaged: The use of an external wireless charger or accessories, damage or failure. Check that the charger and related devices are working properly to ensure that they are compatible with the Apple 13. Foreign object blocking: In the wireless charging area applicable to the Apple 13, any foreign object placed between the phone and the base, blocking the transmission signal will affect the normal wireless charging.
There is a problem with the charger or charging cable, and there is a problem with the phone battery. There is a problem with the charger or charging cable: Make sure you are using an iPhoneCertificate the charger and charging cable and check for damage or wear. Mobile phone battery problems: Mobile phone battery has been aging or damaged, will also cause wireless charging can not work properly, the battery needs to be replaced.
Too thick mobile phone case will affect the induction between the charging coil and the wireless charger in the mobile phone, resulting in normal charging. Therefore, it is recommended to remove the protective case of the mobile phone before using the wireless charger to charge; The charging coil area in the mobile phone is small, and if the mobile phone is placed incorrectly when wireless charging is used, it will also lead to normal charging.
Take iOS11 system as an example, Apple 11 wireless charging can not be chargedBecause there is a problem with the system program, resulting in abnormal charging function hardware, it is recommended to restore the phone to normal use. The iphone11 is a mobile phone released by Apple Inc., which was released on September 11, 2019. The iphone11 features an anodized aluminum and glass design, an A13 Bionic chip, and an ultra-wide-angle camera that supports 2x optical zoom.