Connect the charging base to the power supply Huawei Wireless charging watch and place the watch on the charging base. Align the charging port on the back of the watch Huawei Wireless charging watch with the metal contact on the charging base Huawei wireless charging watch , and adjust the fit until the charging indication appears on the watch screen. The charging indicator shows 100% indicating full charge, at this time the watch will detect and automatically stop charging. Disconnect the charger when fully charged.
Place the WATCH on the charging base so that the back of the watch fits the charging base, and adjust the fitting degree until the watch screen appears charging indicator HUAWEI WATCH 3 series At this time, the watch enters charging mode and cannot operate the screen. If you need to operate the watch, press the up key to enter the watch home screen after the watch is fully charged, the charging indicator displays 100%. Remove the hand.
Charge the watch as follows: Connect the charging base & charging cable and the power adapter, and then connect the power adapter to the power outlet. Place the watch on the charging base. Make the back of the watch fit the charging base, adjust the fit until the watch screenIt is a contact that adjusts the fit until the charging indication appears on the watch screen. The charging indicator shows 100% indicating full charge, at this time the watch will detect and automatically stop charging. Disconnect the charger when fully charged.
2, use the phone reverse charging to open the phone Settings, click the battery, turn on the wireless reverse charging. Place the charging area on the back of the watch under the geometric center of the Huawei phone until the charging power indicator appears on the watch screen. When the phone battery is less than 20%, it will automatically stop wireless reverse charging. During the charging period, there are the following suggestions: If the watch is charging, it should be avoided near the heat, noShould cover the watch.
3. How to reverse charge Huawei gt3 with mobile phone? Open your phone's Settings and tap Battery. Turn on the switch on the right of [Wireless reverse charging]. Place the watch in the charging position on the back of the phone and start charging. Note: If a Huawei mobile phone supports wireless reverse charging to reverse charge the watch, place the watch in the charging area of the mobile phone. If the position is offset, the thermal protection may be triggered, causing the watch to shut down.
1, magnetic charging, superIt's convenient! Huawei children's watch uses magnetic charging, just align the metal contact of the charging base, gently stick, the watch will start charging! Precautions Use the supporting charging base to ensure good contact. Charge in time when the battery is less than 25%, and disconnect the power after full! Avoid using while charging to protect the watch battery life.
2. Connect the power supply. Connect the USB port on the charging base and the power adapter, then connect the power adapter to the power outlet. The charging icon appears to indicate the start of charging. Place the watch on the charging base. Align the charging port on the back of the watch to fit the metal contact of the charging basePoint, adjust the fit until the watch screen appears charging instructions.
3, the watch charging method is as follows: Connect the charging base & charging cable and the power adapter, and then connect the power adapter to the power socket. Place the watch on the charging base. Attach the back of the watch to the charging base and adjust the fit until the charging indication appears on the watch screen. HUAWEI WATCH 3 Series: When the watch enters charging mode, the screen cannot be operated. If you need to operate the watch, press the up key to enter the watch home screen.
4, connect the charging base with the power supply, and place the watch on the charging base. backstrapAlign the charging port with the metal contact of the charging base and adjust the fit until the charging indication appears on the watch screen. The charging indicator shows 100% indicating full charge, at this time the watch will detect and automatically stop charging. Disconnect the charger when fully charged.
5. Huawei smartwatches are equipped with power adapters, charging bases, charging cables, etc. It is recommended that you use Huawei's original charger, and the first step is to find the device adapter required for charging. Next, lay the charging base flat, and connect the other end to the charger and power supply. After the connection is complete, charge the area on the back of the watchPlace on the base until the charging level prompt appears on the screen.
1. If the Huawei watch cannot be charged, check the following: The metal charging port on the back of the watch and the metal contact on the charging base are properly aligned and in good contact. Check the metal charging port on the back of the watch and the metal contact of the charging base for dirt or water stains. Check that the metal contacts of the charging base are intact. Please keep the watch from overheating, otherwise it may cause the battery to chargeAbnormal or no charging occurs.
2. If your Huawei watch cannot be charged, check whether the metal charging port on the back of the watch and the metal contact on the charging base are properly aligned and in good contact. Then, check the metal charging port on the back of the watch and the metal contact of the charging base for dirt or water stains, which may affect the charging contact. Check whether the metal contact of the charging base is intact. Damaged contact may cause failure to charge.
3. The rice grain and the charging slot are not tightly inserted. Query the common faults of the wireless charger shows that the watch wireless charger can not be charged is that the rice grain and the charging slot are not plugged tightly.
4, there is a layer of film on the original, has it been torn off? Check whether the plug on the other end of the charger is firmly inserted in the socket and whether it is loose. It may also be that there is a problem with the charging sensor on the back of the watch, please see if there is dirt on the charging sensor on the back of the watch, wipe it clean, and then charge. If it has not been able to restore normal charging, it may be that there is a problem with the charging line in the watch, and you can only call the after-sales service phone to report for repair.
5, long press the side button, more than 10 seconds. There may be automatic shutdown or external influence shutdown situation. Check the watch charging port for foreign objects, chargeCheck whether the base PIN is ejected normally. If the PIN of the charging base can pop out normally, the watch black screen, connect the charger and continue to try. When charging, align the watch charging port and the base charging PIN carefully.
6. Check whether the original charging base is used. The actual charging power varies with different scenarios.
1. Battery: WATCHFIT 2 is equipped with 292mAh battery and adopts magnetic fast charging; The WATCH GT 3 comes with a 292mAh battery and wireless charging technology. You can log in to Huawei Mall to learn more about the parameters of the smartwatch, and choose according to your preferences and needs.
2,. The HUAWEI WATCH FIT does not support wireless charging. 2. You are advised to use the original charging cable of HUAWEI WATCH FIT. 3. Some charging banks will be turned off when the current is low, resulting in insufficient charging or unable to charge, it is recommended that you use normal charging as far as possibleThe electric plug charges the watch.
3, contact charging. Huawei watchfit2 uses magnetic contact charging, and the charging base near the contact can be easily paired, and the charging connection is convenient.
1. The maximum input power of the watch is 5W. You are advised to use a Huawei power adapter with rated output voltage of 9V and rated output current of 2A to power the wireless charging base. The power adapter is optionalBuy power adapters that are CCC certified and meet standard requirements. Open the App, use the App code scanning function, scan the two-dimensional code on the watch screen, and complete the pairing according to the prompts.
2, use the built-in wireless charging cable to charge the watch3: with the 5V1A charging head, charge 6% in 9 minutes, from 11% to 17%. Charge 13% in 13 minutes with a laptop USB port. With the Mate40pro's 66-watt charging head, it shows compatibility with 5V2A, which is the watch3 charging specification, and 8 percent charge in 10 minutes.
3. Use your ownCharge the watch3 with a 5V1A charger: Charge 6% in 9 minutes, from 11% to 17%. Charge 13% in 13 minutes with a laptop USB port. Huawei WATCH 3, one of Huawei's annual flagship smartwatch WATCH 3 series [1], is the first HarmonyOS smartwatch released by Huawei, running the self-developed HarmonyOS operating system.
4. Huawei gtrunner supports 5V2A charging power. Huawei WATCHGTRunner uses the latest design language, SpiritThe sense comes from the front grille of the super GT racing car, the shape of avant-garde hard, the watch body and the strap are simple and smooth, and the whole shows a strong sense of performance. In order to pursue the ultimate non-sensory wearing experience, the case uses a high-strength composite carbon fiber lightweight material, which is more thin and wear-resistant while reducing the weight, and the special watch body material also makes the positioning more rapid and accurate.
5, Honor watch gs pro can wireless charging Honor watch gs pro does not support wireless charging, Honor watch gs pro has a built-in 790mAh large-capacity battery, and only supports 5V1A magnetic charging power.On the bezel material, GS Pro uses stainless steel material with strong resistance, and goes through multiple processes such as highlighting, drawing, cutting, etc., to enhance the texture while also highlighting the sense of strength of the watch and the strong resistance of the dial.