1. Open "Settings" on the phone. Click the "Battery" option. Turn on the Wireless reverse charging switch. 1 Comment share report Huawei terminal customer service 2024-02-13 · will take every timePlease charge the phone with the screen facing up in the center of the charger or the position suggested by the charger manufacturer.
2. Enter the battery Settings and turn on the wireless reverse charging switch. Turn on the device to be charged and place it in the center of the back of the phone. Do not place metal objects between the mobile phone and the device to be charged. If the device does not start charging after 5 seconds, adjust the position and try again. During the charging process, if the device to be charged is away for more than 2 minutes, the phone will automatically turn off the wireless reverse charging switch.
3,Intelligent adjustment of running time with temperature and scene or automatic shutdown. Check the working status and temperature of the liquid cooling system through the mobile phone APP to ensure that the phone is always in a good heat dissipation state.
2, the use of the situation has manual control, automatic control. The micro-pump liquid cooling shell is a new type of mobile phone cooling device, its working principle is mainly through the built-in micro-pump to drive the coolant circulation, the heat generated by the mobile phone evenly dispersed, to achieve efficient heat dissipation and cooling. The micro-pump liquid cooling case can be manually switched on and off in the Settings page of the phone, or can be set to automatic adjustment mode.
3, iqoo does not need to manually playTurn on the liquid cooler. It turns on itself when the phone turns on. The water-cooled cooling system uses a pump to circulate the coolant in the heat dissipation tube and dissipate heat. The heat-absorbing part on the radiator (called the heat-absorbing box in liquid cooling systems) is used to absorb heat from the computer CPU, north bridge, and video card. The heat absorbed by the absorbing part is vented to the outside of the main engine through a radiator designed on the back of the fuselage.
4, iQOO 8 adopts VC power pump liquid cooling, all-round three-dimensional heat dissipation, temperature rise control, heat dissipation is fast and uniform, effectively reducing the surface temperature of the mobile phone for a long time, and there is no switch for automatic heat dissipation. Also in CPUThe sleep mode is added to the system, and the low-power power-saving mode is also added to the system, which can achieve good heat control and heat dissipation. At the same time, environmental factors also have a certain impact on the temperature of the phone, and a cool and ventilated environment also helps to dissipate heat.
1, check the environment: ensure that the environment around the AP61 wireless charging device is well-ventilated, and there are no blockages or obstructions. An overly closed environment can lead to heat accumulation and heating problems. Use the original adapter: Make sure the original adapter is being used to power AP61 Wireless charging device. Low-quality or mismatched adapters cannot provide enough power, resulting in device overload and heat.
2, the root cause of the high power wireless charging problem is that the high power wireless charging on the market now relies on high current for charging, but this situation is tantamount to increasing the resistance, thereby increasing its temperature, so it is necessary to use high heat absorption and high heat dissipation materials as the outer packaging, in addition, it is necessary to reduce the resistance accordingly. This will fundamentally reduce the fever.
3, the mobile phone will have some heat when charging, which is normal, because inThere will be a certain loss of electrical energy during the charging process, and this part of the electrical energy will be converted into heat, so that the phone and the charger will keep warm, such as the temperature of the phone will be higher when charging.
4, the general use of metal heat dissipation can reduce the heat transfer to the mobile phone, thus affecting the mobile phone charging power, is bound to increase the metal block on the circuit board or coil, somewhat similar to the notebook CPU plus copper tube heat dissipation. Or increase the active fan heat dissipation, and use the fan to cool the motherboard and coil, which can achieve the delay power reduction time.
5, so this is also recommended that you children's shoes inWhen wireless charging, take off the heavy phone case and let the phone "naked" on the wireless charging seat is better. Can choose with air cooling wireless charging millet vertical air cooling wireless charging is a good solution to the problem of wireless charging heat dissipation, this charger uses a unique air duct design, do not go through the coil, directly take the heat away, to ensure the heat dissipation efficiency at the same time is more safe.
6, during the operation of the mobile phone, the system detects the temperature from time to time, and once the temperature exceeds the set value, for example, it begins to reduce the CPU frequency, causing a delay, or prompts a temperature alarm. The same goes for charging,For example, when the iPhone wireless charging, the shell temperature is about 30 ° C, the system begins to reduce the power. That's why the wireless charging speed of Samsung phones is slightly faster, but the temperature of the phone feels a little higher than that of Apple phones.
1, wireless reverse charging refers to mobile phones and other devices that can only receive wireless charging electromagnetic waves, and can now emit electromagnetic waves through the wireless coil to charge other devices that support wireless charging. However, its charging power is small and can only be used as an emergency. Wireless reverse chargingCompared with the original charger of the mobile phone, the charging power is not very large, and the speed of daily charging of large-capacity devices will be slower, which is more suitable for emergency use in emergency situations.
2, simply put, your mobile phone and other devices that can only receive wireless charging electromagnetic waves can now emit electromagnetic waves through the wireless coil to charge other devices that support wireless charging. However, its charging power is small and can only be used as an emergency. The configuration path is as follows: Settings - Battery, turn on the wireless reverse charging switch.
3, wireless reverse charging refers to a wireless charging technology. Wireless reverse charging allowsDevices charge each other without the use of wires or other connections. This technology, pioneered by Apple, allows Apple devices such as the iPhone, AirPods, and Apple Watch to charge each other. The principle of wireless reverse charging is to use the power of the device itself to charge other devices.