ueboom Wireless Charging (ubiolabs Wireless charging)

• 1, ueboom2 charge no charge
• 2, ueboom2 Bluetooth connection does not respond
• 3, ueboom2 Bluetooth connection method
• 4, ueboom2 Charging light is off

ueboom2 charge does not charge

1, the speaker has two kinds of built-in battery and replaceable battery ueboom wireless charging ueboom wireless charging , you should check whether there is a battery in the battery box, otherwise there will be no charging phenomenon, if the battery has been installed or not charged, you should take out the battery to reload and try again. There are charging instructions when the battery is charging, if the indicator is not bright, it can be determined that there is a problem inside the speaker, and it is necessary to find a dealer to repair and solve it.

2, this indicates that the charge is full ueboom wireless charge or the battery can not be used ueboom wireless charging . Choose the right charger. Generally, Bluetooth headsets have a dedicated charger, if there is no dedicated charger, you can find the charging interface (some are thin and round holes, some are MiniUSB universal interface) the same, and rated output power of the same charger to use.

3, the Bluetooth headset indicator light is broken, it is recommended to charge half an hour to 1 hour, try to turn on the use to see whether it can be used normally, if you can, it is only the indicator light is broken. The reason is that the charger is broken or the charging port of the Bluetooth headset is loose and damaged. Charger problemThe charging light of the Bluetooth headset is not bright, possibly because there is a problem with the charger itself.

4, the headset can not be charged may be caused by the charging bin damage. Solution ueboom wireless charging : The user needs to check whether the Bluetooth headset charger is damaged, and if it is found damaged, you can change the charging bin to charge the Bluetooth headset to try. Bluetooth headset charging should try to use the original charging bin, so as to better protect the battery of the Bluetooth headset, and power is easier to import into the battery inside the headset.

5, should be blueong>ueboom Wireless charging , select UE Boom 2 from the list. For NFC-enabled devices ueboom Wireless charging , you can pair and connect the device directly near the UE Boom 2.

2, the reasons for not automatically connecting after Bluetooth pairing may be as follows: Device setting problems: Some devices require the user to manually select the paired device to connect after pairing, rather than automatically connecting. Incompatible Bluetooth versions: Bluetooth versions between different devices may not be compatibleCannot be automatically connected. Too far: Bluetooth transmission range is limited, if the distance is too far, it may lead to unstable signal or can not be connected.

3, the reasons are as follows: The Bluetooth headset may not enable the pairing function. Solution: Tap the button on the Bluetooth headset twice to turn on the pairing function. Maybe the phone didn't turn on the open check. Solution: Just turn on the open detection of the mobile phone's Bluetooth. Restart the phone, it may be that the CPU usage of the phone is too high to connect.

ueboom2 Bluetooth Connection Method

indicates that Bluetooth is enabled and has entered the searchable mode. The connection method is: the first step: turn on the Bluetooth speaker.

Power on: As shown in the picture, long press the power button in the middle to turn on the device. The light is blinking. At this time, take out the phone, Settings, turn on the Bluetooth function. Then Bluetooth search speaker device, after the search, click the pair, the pair is successful, Bluetooth speaker function can be used. Open the music APP in the phone, click a song to play, and the sound will be transmitted to the Bluetooth speaker. The plus and minus signs in the device are used to cut songs.

Phone is not connected to ueboom2. The solution is to re-pair. First, turn off the Bluetooth headset and then long press the Bluetooth headset multi-function button to activate the Bluetooth headset and the phone to re-pair. Then restart the phone, clear the previous Bluetooth headset information, and then search for Bluetooth again. The Bluetooth headset speaker has no sound.

The following steps: Turn on the Wonderboom2 speaker and hold down the power button until the speaker makes a soundAnd enter pairing mode (the indicator will flash). Open your device's Bluetooth Settings and search for available Bluetooth devices. Select Wonderboom2 in the list of devices and wait for the connection to succeed. Once the connection is successful, you will hear a tone from the speaker.

Click Start to open the Settings. Select device options. Set the Bluetooth switch to the on position. Click Add Device to search for connected Bluetooth devices around you. 5. Tap the Bluetooth device you want to connect to. 6, verify the PIN code, click Connect, match. The match is successful.

ueboom2 Charging indicator is off

1, this means that the ueboom wireless charge or the battery has been unable to use. Choose a suitable ueboom wireless charger charger. Generally, Bluetooth headsets have a dedicated charger ueboom wireless charging , if there is no dedicated charger, you can find a charging interface (some are thin and round holes, some are MiniUSB throughThe same charger with the same rated output power is used.

2, charging when the indicator light is not bright may be due to the Bluetooth headset is not powered on, check whether the home is power off or power off, or the charger and socket and Bluetooth headset connection is normal. It may also be that the charger of the Bluetooth headset is broken, you can change a charger to try again, or connect the charger to other devices to see if it can be charged normally.

3, hardware failure: if the battery of the charging case is sufficient, but the headset's display light is still not bright, there may be a hardware failure of the headset or charging case. thisIt may be caused by long-term use, excessive charge and discharge, or accidental damage. In this case, you can try to restart the headset or charging case, or contact the after-sales service center for repair or replacement.

4, the reason for the situation is: the charging bin may be out of power, insufficient power leads to the indicator light is not bright, need to charge for the charging bin can be used normally. It may be that the contact point between the headset and the charging bin is blocked by foreign matter, resulting in the failure to connect and charge normally. It is necessary to deal with the foreign matter in the charging bin to solve the problem. It may be that the indicator light of the charging compartment is faulty, and it is recommended to contact the manufacturer for maintenance.

5, the display light is not bright when the Bluetooth headset is charging, there are several reasons: reason the Bluetooth headset indicator light is broken. It is recommended to charge half an hour to 1 hour, try to turn on the use to see whether it can be used normally, if you can, it indicates that the indicator is broken. The reason is that the charger is broken or the charging port of the Bluetooth headset is loose and damaged. The charging light of the Bluetooth headset is not bright, possibly because there is a problem with the charger itself.