1, if the indicator is off mobile phone remove wireless charging , please check whether the connection between the wireless charger, data cable, charger and power supply is poor contact Mobile phone remove wireless charging , it is recommended that you re-plug once. 3, please take off the mobile phone protective case before charging due to partThe mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again.
2. If you use a Huawei mobile phone that cannot use wireless charging, perform the following steps: Remove the wireless charging from the mobile phone. : 1. Check whether a wired charging device is connected at the same time.
3, try to replace other wireless charging base for charging, locate the fault of the mobile phoneThe wireless charger is faulty. A non-Huawei wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging. You are advised to use a Huawei official wireless charger. If the preceding problems persist, you are advised to back up the phone data (third-party applications such as QQ and wechat need to be backed up separately), bring related accessories and purchase vouchers, and go to a nearby Huawei customer service center for testing.
4, please use the original protective shell, do not use too thick or magnetic insulation material/metal material protective shell, these protective shells may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged. If the above methods fail to solveFor this problem, please back up your mobile phone data in advance, and take your mobile phone, wireless charger, wired charger set and purchase voucher to vivo customer service center for testing. 5, the mobile phone does not have the function of the method is as follows: you can buy a mobile phone case that supports wireless charging, and install it on the mobile phone, the advantage of this method is simple and convenient, there is no need to replace the mobile phone or remove the internal phone, the disadvantage is that it may increase the weight and thickness of the mobile phone, as well as affect the heat dissipation and signal of the mobile phone.
6, your phone may not be in good contact with the charging base, resulting in failure to charge. Other interfering factorsp>
Of course is not possible, because the wireless charger, he also needs to pad, because the other end of the charger needs to be plugged in the socket, so that you can successfully activate the wireless charger, wireless charger, wireless charger is the mobile phone connected to the charger does not need a line, but the charger itself is also needed to power.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the handCase recharging attempt. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
2. Different charging methods. First of all, the charging method of the two is not the same, the wired charging box must be connected with the cable and the charger, and then inserted into the charging interface at the bottom of the box to charge. The wireless charging box supports both wired charging and wireless charging, and can be charged on other wireless charging boards. Indicator positions are different.
3, cable charging. In the case of the same charging time, the power of the commonly used wired battery charger is 93% after charging, and the power of the wireless charger is 88% after charging. Obviously, there is still a gap in the charging efficiency of wireless chargers, and there is still room for further improvement in technology.
4, Apple wireless earphone wireless charging and wired charging the difference is mainly: Apple wireless earphone wireless charging more than wired charging Mobile phone removed wireless charging A wireless charging function, you need to equip yourself with wireless charger for charging Mobile phone removed wireless charge ; Apple wireless headphones Wireless charging and wired charging look slightly different.
Samsung Service center after replacing the screen, the water resistance of the phone will not be affected under normal operation.
The S8 supports wireless charging and requires a separate wireless charging dock.
The protection of the Samsung phone case extends to the handThe antenna part of the machine and other chips, the general phone case such as silicone, plastic, these non-metal components of the phone case will not affect the signal of the phone.
Generally no damage to the mobile phone. However, in some special mobile phones - such as mobile phones equipped with NFC/ wireless charging - the magnetic ring on the back cover will affect the normal use of these functions. If the mobile phone cannot be charged properly using the wireless charging pad, it may be due to a variety of reasons. It is recommended that you try the following operations: Check whether the back center of the mobile phone is placed in the center of the wireless charging pad.
The S8 supports wireless chargingA separate wireless charging dock is required. If you need to buy Samsung mobile phone accessories (batteries, headphones, smart cases, chargers, etc.), you can do so through the following ways: Samsung Online Store: Go to Samsung Online Store - Accessories to buy. Samsung mobile phone original accessories mall: pay attention to the "Samsung Service" wechat public account, in the wechat chat interface - Products and activities - Accessories mall Samsung stores around.
1, will not affect the use, but will affect charging. Wireless charging technologyThe technology is derived from radio energy transmission technology, which can be divided into two ways: low-power wireless charging and high-power wireless charging. Electromagnetic induction is often used for low-power wireless charging. High-power wireless charging usually adopts a resonant mode by the power supply device (charger) to transmit energy to the electrical device, which uses the received energy to charge the battery, and at the same time for its own operation.
2, remove the iPhone protective case Sometimes the iPhone protective case is too thick will also lead to wireless charging, then you can try to remove the iPhone protective case, and then put back on the wireless charging board to charge.
3, this will not affect its use, but wireless charging is no way to use.
4, Apple notebook coil is broken can not be used. According to the query of relevant information shows: Apple notebook coil is the negative power supply and shielding line, completely broken will have security risks, can not be used.
Charger is not compatible: Wireless charging needs to be used with a compatible wireless charger. Make sure you use a wireless charger with your phoneCompatible and Qi compliant. Charger power problem: Make sure that the wireless charger is connected to a normal power supply and that the power supply voltage is stable. Obstacles between the phone and the charger: Make sure there are no metal or magnetic objects between the wireless charger and your phone.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed on the wireless charging base during chargingCenter, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Different brands of models due to the difference in coil position, may lead to low charging efficiency or can not be charged, pleaseTry placing the wireless charging area of the mobile phone correctly in the wireless charger sensing area. Please do not use too thick or magnetic insulation material/metal material case, these cases may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged.
The reasons why the Mi 3 can not wireless charging may be: Wireless charging function is not turned on: Please confirm whether the phone supports wireless charging, and whether the wireless charging function has been turned on in the Settings. Charger problem: Please use a charger that can support wireless charging of your phone, such as Xiaomi's wireless charger. It is also possible if the charger used is not compatibleWireless charging is not possible.
If your mobile phone cannot be charged properly using the wireless charging pad, it may be due to a variety of reasons. It is recommended that you try the following operations: Please check whether the back center of the mobile phone is placed in the center of the wireless charging pad. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge.