May be the mobile phone protection case is too thick, it is recommended to choose a thin mobile phone protection case or not use when using wireless charging. The phone case is too thick will affect the induction of the charging coil and the wireless charger in the phone, resulting in normal charging. Therefore, it is recommended to remove the protective case of the mobile phone before using the wireless charger to charge; Mobile phone charging coil areaSmall, if the use of wireless charging when the mobile phone is placed incorrectly will also lead to normal charging.
The Apple 12 supports wireless charging, if it can't be charged, either you have a problem with the phone (or it is not placed in the right position, need to be placed in the middle of the back). Or it's the wireless charging device.
The reasons for the failure of the Apple 15 wireless charging may be as follows: The device is not aligned with the charger. If the device is not properly placed in the center of the charger, or there is a physical barrier, it may cause charging failure. The charger is not connected to power. Need to confirm NoneThe cable charger has been plugged into the power adapter and connected to the power supply. The power adapter is faulty. If the power adapter fails, it may affect the work of the wireless charger.
When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
to iOSFaulty wiring: Make sure you are using an Apple-certified charger and charging cable, and check for damage or wear. Mobile phone battery problems: Mobile phone battery has been aging or damaged, will also cause wireless charging can not work properly, the battery needs to be replaced.
2, if you turn on the notification, the iPhone will often vibrate, may cause displacement to stop charging, if this is the case, please consider turning off the vibration function: or temporarily turn on Do not disturb mode to prevent the iPhone from moving.
3, if the iPhone wireless charging suddenly does not charge, it may be because sometimesUnpredictable errors in iOS system updates can cause problems with wireless charging, which can usually be solved by restarting. Remove the iPhone case Sometimes the iPhone case is too thick will also lead to wireless charging, then you can try to remove the iPhone case, and then put back on the wireless charging board to charge.
4. The iPhone may heat up a little while charging. To extend battery life, if the battery overheats, the software may limit charging when it reaches 80%. When the temperature drops, the iPhone will be charged againElectricity. Try moving your iPhone and charger to a cooler location. If you use your phone while wireless charging, it is recommended to stop using your phone temporarily due to the possibility of position shifting, which may cause suspension of charging or the phone becoming hotter.
5, may be the mobile phone protective shell is too thick, it is recommended to choose a thin mobile phone protective shell or not use when using wireless charging. It may be that the phone is not aligned with the charging area of the wireless charger, it is recommended to check the wireless charger specifications to determine the wireless charging area, the wireless charger and the mobile phone wireless charging system is not suitable, it is recommended to use the wireless charging requirements of the mobile phoneThe charger. There may be a wireless charger failure, it is recommended to contact after-sales maintenance.
6, if your Apple XR wireless charging cannot be charged, it may be caused by the following reasons: The charging base is not connected to the power supply: Please ensure that your charging base is properly connected to the power supply. If the charging dock is poorly connected, your device may not be able to charge. Charging dock issues: Make sure your charging dock is certified and compatible with your device.
Portable wifi can not be charged for the following reasons: charging line failure: If the charging line of portable WiFi is faulty, it can not charge other devices. At this time, you need to check whether the charging line is damaged or poor contact, and if there is a problem, you need to replace the charging line. Lack of battery capacity: The battery capacity of the portable WiFi is limited, and if the battery capacity is insufficient, it will not be able to charge other devices.
Charger failure: Try to use the same specifications of the charger for charging, if it can be successfully charged, it is the original charger failure, to replace. Loose or damaged charging cable:Check that the charging cable is securely connected between the device and the power adapter. If the charging cable is loose or damaged, the current cannot be transmitted normally and the charge cannot be made. To replace a new charging cable, make sure the plug fits the connector tightly.
You can try to remove the battery first, see if the battery is removed, plug in to see if it can be used, if you can, it is the battery problem. If not, it's the equipment. If you are a grid user, you can contact customer service to replace the battery or the device. Their customer service is quick to deal with problems.
First, the most common cause is the charger or numberThere is a problem with the data line. If you use an incompatible or damaged charger and data cable, it may cause the portable WiFi to be unable to charge normally. At this point, you can try to replace the charger or data cable to see if the problem is solved. Secondly, the battery of the portable WiFi may have been damaged or aged. Aging or damaged batteries can lead to reduced charging efficiency or even inability to charge.
The solder joint in your usb interface is loose, you shake the usb interface part around or up and down, and if you are lucky, you may be able to rush into one or two times, and I have a problem. The best thing is to get a phone repairman to weld it for you. 1It's $0.