1, first remove the waste mobile phone, as shown in the following picture after painstaking welding to the positive and negative wires, a waste charger and headphones, remove their wires.
2, an iThe Phone's wireless charging receiving card. Wireless charging receiving card a compatible charger. A non-metal flexible ultra-thin casing.
3, finally is a purchase from the Internet QI standard 1000mA output wireless charging kit, found a lot on the Internet, most of them are output 500mA, Xiaomi mobile phones and a lot of Samsung mobile phones, line charging is 1000mA, with other 500mA chargers have no response, so 500mA is not considered.
4, in fact, let the iPhone support wireless charger is also very simple, only need to wireless charging cardPlug it into the iPhone connector, fold it into the back of the phone or place it in a protective case, and then find a stand to set it up. Although this does take up the phone's only data port, it can at least allow the iPhone to experience wireless charging, and it will not affect daily use.
There is a thermistor wireless charging machine accessories on the wireless charging coil to detect the temperature during charging. Type-C seat sonInternal clamping steel sheet Wireless charging and dismantling machine accessories , durable. Disassemble the family photo. Zte wireless charger products work neat Wireless charger accessories , looks very comfortable. The input has electrostatic protection to avoid damage and reasonable design. Using well-known manufacturers in the industry components, IDT solution with diodes mos tube, the material is the mainstream level.
ZTE Tianji 10spro supports wireless charging. According to the official website of ZTE wireless charging and disassembling machine accessories : ZTE Tianji 10spro It supports Qi standard wireless charging Only need to use the wireless charger that supports Qi standard, you can achieve wireless charging. At the same time, the ZTE 10spro also supports 18W fast wired charging, and the fast charging function can make the battery fully charged faster, and ensure the long endurance of the wireless charging machine accessories .
The principle of wireless charging is electromagnetic induction. Wireless charging mainly uses electromagnetic induction, and the energy is transmitted between the charger and the electrical device by magnetic field, and there is no wire between the two20W charging board disassembled...
1, Machine Letang 20W 3-in-1 wireless charging board appearance packaging box with a hook for convenient display Wireless charging machine accessories , printed on the front JOYROOM brand, charger name, use scenario and selling point and other information Wireless charging machine accessories , It can charge the iPhone family bucket wirelessly at the same time. The back is also printed with product usage scenarios and feature descriptions, and can also be charged with two iphones and Apple Watch at the same time. Packing boxDrawer design with a wireless charging pad on top of the tray.
2, the mobile power supply and the largest wireless charger accessories iPhone 12 Pro Max weight is similar, and the phone will be tightly adsorbed together, even if suspended will not fall, visible adsorption force is very strong. In addition, in daily use, you can spread the foot when the "vertical wireless charging" use, charging while watching the use experience is also very good. Green magnetic wireless charging mobile power disassemble the body shell, the edge of the buckle package.
3, it is compatible with PD and PPS and other fast charging agreement, can be a good service Apple iPhone 8-12 and Samsung S20/21 and other series of models charging, to Apple iPhone 13 new machine use effect is also very good.
4, the heat dissipation plate and the isolation board, the small board is affixed with a thermal pad and glue, the charger design pays special attention to insulation and heat dissipation. Two output filter solid state capacitors are coated with rubber sheath insulation, and the output end is provided with a small board, welding indicator light, and enhance the overall stability of the module. After the observation of the charger module, it is found that it uses high-frequency QR switching power supply with wide range output and secondary protocol chip controlTypical architecture of the output voltage. Let's start from the input side one by one wireless charging machine accessories understand the components.
5, in addition, the product is equipped with 1A1C1L three interfaces, supporting 12W/18W input and 20W fast charge output, as well as 10W magnetic wireless charge, for iPhone 12 users, only need to bring a Lightning cable when going out, to meet the demand for electricity for a day. In addition, the mobile power supply has also passed the WPC qi and Apple's official MFi dual certification. The following charging head network is produced for this modelThe product is disassembled in detail to see how the specific materials are working.
1. Disassemble the mouse pad using a crowbar to separate the mouse pad. Divided into aluminum base and mouse pad two parts. The mouse pad is hollowed out above the corresponding wireless charging part to reduce thickness and maintain consistency. The wireless charging circuit board and coil are attached to the aluminum base plate. Compare the size of a $1 coin. The back of the magnetic separator is insulated with high-temperature tape, and the PCB capacitor is hollowed outReduced thickness, no components on the back. Wireless charging part, the circuit board is more concise.
2, in order to achieve wireless charging of mobile phones and other products, there must be two parts: the transmitter, connected with the power supply, responsible for transmitting electrical energy to the vast space; A receiver, usually mounted on an electronic product, to receive electrical energy. Wireless charging technology has begun to be used in mobile phone products, taking the iPhone as an example, wireless charging manufacturers in order to enable it to have wireless charging function, it is modified, installed a similar "apple skin" "clothes".
3, the upper right corner of the mouse pad is wireless chargingBattery area, support wireless charging and overcharge protection, we used a Leiber VT950Q wireless charging support mouse for testing, the mouse can be charged normally, and in the process of charging the Leiber V10RGB magic wireless charging mouse pad will appear charging instructions, better prompt us charging status, in terms of power, This rechargeable mouse hard pad supports 5/5/10W output.
4, compared with the Xiaomi wireless charging treasure 10000mAh currently on sale, the youth version is basically consistent in appearance design, but the new black and white color choice is more young and fashionable. The shell material is changed from metal to plastic, and the function is slightly reduced, so the price is reduced by 20 yuan.
1, Millet 55W vertical air-cooled wireless charging using PC flame retardant material plastic shell, fuselage edge clear end corner arc transition, support board is black, base sandblasting treatment is gold. From the front, the front end of the base is equipped with LED indicators, and the support board is layered up and down, using differentDesign. Indicator light is green when working.
2, Millet 55W vertical air-cooled wireless charger is equipped with a special bracket, can be directly installed on the base, and is embedded, especially stable wireless charger accessories ! It can be removed at any time when not in use, because it is specially configured for the Mi 10 Ultra, and it is generally not used.
3, Mi 9 Pro supports 55W vertical air-cooled wireless fast charging, but there will be no fan rotation during the charging process. This is normal, because in the time of fast charging, the phoneIt gives off some heat, but it's not too high, so it doesn't need a fan to turn it to dissipate heat.
4, compared with the common 10W wireless charging technology on the market, Xiaomi's 30W wireless flash charge can charge half of the 4000mAh battery in 25 minutes, realizing the wireless charging and disassembling machine accessories the efficiency of "wireless beyond wired". Xiaomi's vertical air-cooled wireless charge 30W design is clever, the tilt Angle is ergonomic, convenient for users to operate while charging, the built-in ultra-quiet fan can effectively actively heat dissipation, improve Wireless charger accessories The comfort of the charging process.
5, millet vertical air-cooled wireless charger (55W black) 199 yuan at present millet maximum power (charging speed is the fastest) wireless charger, if the phone is 30W or 33W wireless charging power, then it is recommended that you "redundant" to buy this power of the wireless charger, because the mobile phone upgrade faster, The wireless charger this product can be used for several years, and the new mobile phone can also achieve power coverage in the future.
1, first of all, you need to shut down the iphonex phone completely, prepare the screwdriver, and remove the bottom two screws of the screen. Secondly, you need to remove the screen with a card and remove the metal sheet screws of the old wireless charging module. Finally, remove the old wireless charging module and replace it with a new wireless charging module.
2, the top surface is provided with two round rubber pads, indicating two wireless charging areas, while charging and anti-slip protection equipment, kill two birds with one stone. There is a storage board on the right side, and the watch wireless charger can be fixed in the empty slot to pass the machineLetang this charging board also for the Apple family bucket wireless charging. When the storage board is in use, it can be taken out, and it can be pressed back when it is not in use, and it does not take up any space. There is also an LED charging indicator.
3, a good idea, I think in the barrel or somewhere to punch two holes, with two electrodes respectively connected to the positive and negative battery, charging the electrode connected to the charger is good, the change is very small, you can try.
4, the following charging head network on this product for detailed disassembly, to see how the specific materials work. Momis magnetic wireless charging mobile power packageThe front of the box is printed with MOMAX brand, MFi certification logo, qi certification logo, mobile power supply and iPhone 12 appearance map, name, etc. The product usage scenario diagram and description are printed on the back. There is a merchant information sticker and certificate on the bottom.
5, the apple charger is basically a buckle and glue, only violent disassembly, or take the sol a little bit of glue, but after 10 minutes, you will choose violence.