1. Poor connection. The Mi 11 is a mobile phone product released by Xiaomi on December 28, 2020 at Xiaomi Science Park and will be available on January 1, 2021. Mi 11 after the motherboardPoor connection contact, resulting in slow charging, you can go to the mobile phone store to reinstall the motherboard, millet 11 screen using 81 inches.
2, there are some applications in the millet 11 system that interfere with the normal operation of the system. In particular, some programs get root permission, so for the sake of the system security of the mobile phone, please do not use root permission at will. The restart is because the software is not compatible with the current system version, in which case the software needs to be upgraded.
3, can be out of power, the protection state is blinking. When millet wireless charger, Millet wireless charger (universal fast charge version)When the LED light status is green and blinking, the Xiaomi wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again. The power will be off for a while, this is not placed in the right position, detected metal foreign objects, automatic protection Settings.
4, power plug power, wireless charger power, mobile phone wireless charging receiving power power plug power/wireless charger power/mobile phone wireless charging receiving power, these three key points are mutually complementary and mutually restrictive relationship, the final actual power is the smallest of these three items for the actual chargeElectrical power.
1, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
2. Check whether the phone supports fast charging. Use the original charger, and the phone screen is turned off. If the problem still exists according to the above method, please bring the purchase invoice, repair card and machine to the Samsung service center for inspection.
3, confirm whether to use the original charger; Some mobile phones have a fast charging switch: setting - battery - fast wired charging - slide on; Check whether the system has a new version and upgrade the system. If no, back up important data (contacts, SMS messages, photos, etc.) and try to restore factory Settings. If the problem persists, please bring the purchase invoice, repair card and machineCheck and search at Samsung Service center.
4. As mentioned above, fast charging is not enabled. The opening method is as follows: First, open the setting function of the main interface of the mobile phone, as shown in the following figure. After opening the Settings page, select and click the "Battery" option, as shown below. After entering the battery interface, find the "fast wired charging" option at the bottom and turn on the switch, as shown in the following picture.
5, the reason is that fast charging is not enabled, the method of opening is as follows: find the setting function of Samsung S7 mobile phone, and click to enter the setting function.
1. Try to replace another wireless charging base to charge the device, and determine whether the fault is the fault of the mobile phone or the wireless charger. The non-Huawei wireless charger may be incompatible with the mobile phone, resulting in abnormal wireless charging function. If the preceding problems persist, you are advised to back up the phone data (third-party applications such as QQ and wechat need to be backed up separately), bring related accessories and purchase vouchers, and go to a nearby Huawei customer service center for testing.
2. Expand all wireless chargingHow to enable Huawei: Open Settings on your mobile phone. Click the "Battery" option. Turn on the Wireless reverse charging switch.
3, the methods that can be taken in this case are: determine that the phone is compatible with the wireless charger, check the charger and the power adapter, check the alignment between the wireless charger and the phone. Make sure your phone is compatible with your wireless charger: Make sure your phone supports wireless charging and that the wireless charger is compatible with your phone model. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model.
Because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Incorrect charging position Check whether the phone is facing the center of the wireless charging pad, if not, it may cause failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc.,Will affect the charging effect, need to remove them. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
Most cases of no charging are due to the mobile phone running the program when charging, or the mobile phone system has a high power consumption problem, resulting in the charger input current is not enough to offset the power consumed by the mobile phone itself, so there is charging but the power does not increase. Computer USB interface outputThe current is small and unstable, and this phenomenon may also occur when the phone is connected to the computer to charge, because if the output current is too small, it can not offset the power consumed by the phone, resulting in no increase in power.
1, when the temperature is too high, the charging power will automatically decrease. All versions of Mi 11 charging temperature control is particularly strict, the temperature reached 36 degrees began to slow down 40%, normal to 9000ma, mobile phone temperature above 36 degrees is only 5000About ma. The Mi 11Pro battery is equipped with a large battery capacity of 5000mAh, which supports 67W fast charging, 67W wireless charging, and 10W reverse charging.
2, must use the mobile phone original wireless charging can be faster. The charging effect of the mobile phone depends on the charger, but also related to the charging cable and the mobile phone. In terms of chargers, the general charger will have a built-in smart chip, which can identify the current and voltage required to charge the phone, and then adjust the current and voltage within the safe range of the phone.
3, mobile phone Settings "clickPower saving and battery Settings ". On the Power saving and battery Settings screen, tap Fast Acceleration. Quick acceleration Click the dot behind the "Default use fast charge acceleration", and the dot turns blue, indicating that the Xiaomi phone has successfully restored the fast charge function. Xiaomi's fast charging technology is called Super Charge Turbo, and the highest wired charging power supported by the Xiaomi 12 Pro is 120W.
4, Millet 11pro how wireless charging? As long as the Mi 11pro phone is placed on the wireless charging base, wireless charging can be carried out. The Mi 11Pro supports 67W NoneCable super fast charge, but wireless charger needs to be purchased separately. In order to match the unprecedented wireless fast charge, Xiaomi also released an 80-watt wireless charging base set, which contains an 80-watt wireless charging base and a 120-watt charger, as well as a 6A data cable, priced at 499 yuan.
5, power plug power, wireless charger power, mobile phone wireless charging receiving power power plug power/wireless charger power/mobile phone wireless charging receiving power, these three key points are mutually complementary and mutually restrictive relationship, the final actual power is the smallest of these three items for the actual charging power.
6, when the power of other equipment is not enough, you can use the mobile phone to give him an emergency recharge. How does Xiaomi 11pro turn on wireless reverse charging? Let's take a look ~ Millet 11pro how to open wireless reverse charging? In your phone's Settings menu, tap the Battery and Performance option. Click on the Battery option. Turn on the switch on the right side of [Wireless reverse charging].
Please check the indicator light of the wireless charging base. If the indicator light is not on, please check whether the connection between the charging base, data cable, charger and power supply is in bad contact. It is recommended that you re-plug it. Please check whether there are other items between the phone and the wireless charging base, and remove them if there are. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Cannot charge when connected to the charger: (1) It is recommended that you use the standard charger and charging cable for charging. (2) If your mobile phone is not enabled for a long timeUse, or low power off after the phone is not timely charge, there may be excessive battery discharge, it is recommended that you connect the charger, charge for more than 30 minutes to see whether the phone has a reaction.
Check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. It is recommended to reinsert the wireless charger. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus cards, metal, etc.) between the device and the wireless chargerSubstance).
The wireless charging base indicator is not on. Please check whether the connection between the charging base, data cable, charger, and power supply is in bad contact. It is recommended that you re-plug it. Is there anything else between the phone and the wireless charging base? If so, please remove it. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected. If the phone is out of position, it will not be able to charge.
Check whether your mobile phone supports wireless charging. You can open the Service App on your mobile phone. (On some models, Service is integrated into the My Huawei APP.)Click "My My Device Local view device parameters" to query device parameter information and check whether your mobile phone supports wireless charging.
does not rule out the problem of the charger, you try to change a charger to see whether it can be charged, or the plug or line is wrong to go to the relevant repair shop. Press the power button and volume down button at the same time to restore. The battery is dead. If your phone is not an all-in-one, replace it with a new battery. If your mobile phone is an all-in-one machine, you can go to the after-sales network or the manufacturer's authorized network repair machine engineers with professional equipment testing.