The steps are as follows: Remove the bottom non-slip pad. There are screws at both ends of the fuselage for encapsulation and fixing. Remove the screws to open the fuselage. There is a black circular plastic plate on the retaining column of the top housing. A wireless charger is placed in the bottom fuselage slot.
Push the retaining strip to the left, take out the silicone pad from the original car, and remove and take out the two USB cables. Put in the purchased wireless charging board, and the two USB ports on the wireless charging board need to pass through the two holes in the cover plate to reach the bottom. And put the retainer back on.
BYD chargingStep of removing the charging pile in the pile connection: Do not use brute force to pull out the mechanically locked charging pile gun from the charging pile, by clicking the stop button of the star charging mobile phone client or swiping the card to stop charging (the basic charging pile can skip the scanning code or swiping the card step). Pull out the charging gun from the vehicle. Retract the charging cable and replace it on the bracket that came with the device. Lock the charging port of the car.
BYD Han's wireless charging switch is located in front of the central armrest. Byd Han's length, width and height are 4950*1890*1490mm, and the wheelbase of the body has reached 2940mm, which is expectedIt will be a medium to large sedan. In terms of configuration, BYD Han is equipped with a wealth of configurations, such as ACC adaptive cruise, electric suction door, head-up display, parallel assistance, lane keeping assistance, and induction open luggage.
Disassemble directly. Remove the cover of the SiHAO e10x wireless charging module, and use a grid for copper coating on the other side in the position without charging coil. The corresponding wireless charging coil area is grid-shaped with copper, and the module is removed and the rubber pad is torn.
No. The charging port of BYD Han is located on the right rear side of the vehicle, and the cover of the charging port is pressed inward when the vehicle is unlockedIt'll pop off, but it won't turn.
Between 1 and 7 kW. According to the inquiry on the official website of the car home, the charging power of the locked car state is between 5 and 7 kilowatts, and the vehicle unlocked state, with a protection mechanism, the power will be reduced to 3 kilowatts, and 3 kilowatts is the power of the 16 plug-in charging with the car charger.
2, the charging gun is not locked in the charging port. According to the query car home network, the meaning of this sentence is when the charging gun is not successfully lockedWhen stopping at the charging port, the system will think that there is a poor connection or security risks, so it will reduce the charging power to protect the battery and charging equipment, when charging, be sure to ensure that the charging gun is correctly inserted and successfully locked in the charging port to avoid safety problems caused by poor contact.
3, in the event of abnormal conditions, the system will automatically lock the battery power output to ensure the safe and stable operation of the vehicle. Charger current limit protection: When BYD electric vehicles are charging, the charger will limit the charging current to prevent damage caused by overcharging the battery pack, and ensure that the charging process is stable and safe. When the charger detects a differenceUnder normal circumstances, the charging power output is also automatically locked.
4, indicating that there is a problem with the electric lock or the locking mechanism. If the electric lock is not locked, it will limit the charging power, to go to the 4S to check the electric lock part in detail, the treatment method is very simple, remove the gun and re-plug it. Byd's AC charging gun length of about 5 meters, rated power of 1760W, the overall positioning is a portable emergency charging product.
5, BYD vehicles do not have the function of fast charge, can only accept 3KW power. The AC pile should be used when charging, and the rated power is generally 7KW; When charging BYD's hybrid car, the on-board charger can only accept 3KW of power, that is, it is limited by the car. Electric vehicles come with a fast charge function that can accept higher power charging speeds.
When the vehicle is in the "D" driving mode, just pull the transmission lever back to manually shift, you can turn off the non-slip mode.
The lights only turn on at night. If it is the fault signal light on the car, be sure to find out the cause, after the fault is eliminated