On its flat and smooth base panel, you can't see a protruding button, but there is a bold and simple icon, which is just like a mobile phone. You can light up the power button with your finger and shut down the operation.
The method of use is as follows: After plugging in the power supply, touch the arc light pole with your finger at any position to turn on the light. Put the device that needs to be charged under the light and switch the phone to wireless chargingMode, into the lamp wireless charging induction area. Use the phone charging cable to connect the lamp USB port to the phone, and the phone can also be charged.
How to use Huawei wireless charging desk lamp? In addition to being able to turn on and off by touch, there are more detailed adjustment functions on its panel. With a finger swipe, you can adjust the brightness of the light stepless, and the experience is exactly the same as adjusting the brightness of the mobile phone. Moreover, because this operation does not involve mechanical movement, there will never be wear and aging. The experience is the same no matter how long you use it.
Music lampThe play and pause buttons can be used to turn on the switch and pair with Bluetooth, just connect the phone to the music lamp, and then use the buttons on the lamp to play music.
Check the charger and charging cable First, check whether the charger is working properly and observe whether the indicator light is on. If the charger has no current output, it needs to be replaced with a suitable charger. Don't forget to check that the charging cable is in good condition, and if the charging cable is broken or damaged, consider replacing it. Clean the charging port smallThe lamp can not be charged may be related to the poor contact of the charging port.
When charging, the plug is completely pushed out and directly inserted into the AC110V~240V/50~60Hz power socket, the corresponding charging indicator is on, and sufficient power takes about 14 hours. When in use, press the switch button for low light lighting, press the second button for strong light, and press the third button to turn off the light.
Resistance selection, stable and reliable if you can't find a 1W resistance for the time being, you can use 10 0.125W/150 ohms of resistance in parallel instead, although the volume is slightly larger, but the same stable and reliable. Energy saving and durable, finishedWith these tips, your charging desk lamp and LED bulb can be perfectly matched, both energy saving and durable.
When charging, the lamp AC plug is completely pushed out, directly inserted into the AC90 to 240V power socket, the corresponding charging finger light, indicating that the lamp is in the state of charging, sufficient power for about 12 hours. When in use, push the switch button, the first gear is 9 LED weak light, the second gear is 15 LED strong light, and the top gear is turned off the light. Fully charged, the first gear can be used continuously for about 10 hours, and the second gear can be used continuously for about 5 hours.
As long as your mobile phone supports wireless charging, you can immediately start charging in the middle of the "cross symbol" position, at this moment, you will see the dynamic aperture of charging appears, convenient and simple! The sweet thing is that when the phone's charge reaches 90%, it will slow down the direct current, thereby extending the battery life.
The method of use is as follows: After plugging in the power supply, touch the arc light pole with your finger at any position to turn on the light. Put the device that needs to be charged under the light and switch the phone to wireless charging modePut it into the wireless charging induction area of the lamp. Use the phone charging cable to connect the lamp USB port to the phone, and the phone can also be charged.
LED wireless charger Bluetooth speaker to charge the mobile phone method is as follows: ensure that the speaker is connected to the power adapter, the speaker itself is fully charged. Find the wireless charging area on the speaker, on the top or side. Place the phone that supports wireless charging on the wireless charging area, ensuring that the back of the phone is in contact with the charging area.
Connect the phone's standard charger and data cable to the wireless charger, and then put the phone in the center of the left and right of the wireless charger baseThe meaning of current, that is, the use of mains lights, DC is the meaning of direct current, indicating the use of rechargeable battery power supply. When charging this LED lamp, the switch must be placed in the Off (off) position.
Rough judgment: After two hours, try to light the lamp every half hour to observe (do not fill while bright), add the result of the light is the brightest and the lamp brightness should no longer increase, and then float the same charging time can be adopted.
The rechargeable lamp with its own charging cable can be connected to the power supply for charging. The light above the charger is red when charging, and when the indicator light changes from red to green, it means that the charging is complete, if notPlease use the indicator according to the instructions. In order to ensure that the battery is in a safe range, you need to bring your own charger, which will automatically adjust the charging mode according to the current state of the battery. led strips are generally divided into flexible led strips and led hard strips.
Can be charged with a built-in rechargeable battery. Plug in 220V AC, and you're done. It's marked on the lamp. Maximum charge is a few hours.
1, charge the LED charging lamp when the power is running out, noUse up the electricity, and then charge, please stay in the small amount of electricity and then charge. If it is not used for a long time, it can be charged once in a while, and it must be kept in a wet place on the ground. If you need to replace the light source (light tube), be sure to refer to the specified parameters of the LED charging lamp assembly, and do not change the structure.
2, when charging, switch to off (off, off) state, charge the battery, and cut off the lamp circuit to prevent charging high voltage into the lamp circuit or open the lamp when charging state, resulting in lamp circuit components (led is the easiest) damage. In useSwitch to the on (on, on) state, the battery is connected to the lamp circuit, and the lamp switch controls the led to turn on and off.
3, rough judgment: after two hours, try to light the lamp every half hour to observe (do not fill while bright), add the result of the light is the brightest and the lamp brightness should no longer increase, and then float the same charging time can be adopted.
4, Banuo led charging desk lamp is directly through 220v voltage when charging. The led charging desk lamp is powered by the internal 12V battery, after the battery is used up, it is charged by the charging jack, and the jack is directly connected to the 220V voltage.The circuit of this lamp is relatively simple, do not turn on the lamp when charging, so as not to damage the LED lamp beads. You should unplug the light when you turn it on.
5, the lamp power cord two holes fully inserted into the lamp AC socket, plug the end directly into the AC90V~240V power socket, the corresponding charging indicator light, indicating that the lamp is in the charging state, charging for about 10 hours. Student dormitory artifact bedroom lamp folding portable creative learning eye protection lamp ultra-long life reading light, for you to find student dormitory artifact bedroom lamp folding portable creative learning eye protection lamp ultra-long life reading light reading light.