【 Pacific auto network 】 The car to charge the mobile phone does not go in first checkWhether the switch of the USB interface is opened, and then check whether the cigarette lighter is in poor contact with the car jack, and whether the data cable for charging the mobile phone is faulty. Eliminate the phone, charger, cigarette lighter in turn. First of all, eliminate the influence of mobile phones: plug the car charger into the cigarette lighter port and check whether the indicator light is displayed normally.
Replace the line charge, see if you can charge, if you can rush in, it is the wireless charging is broken, if you do not charge it is the battery is broken. I hope I can help you.
Many users may not charge their mobile phones when they use the mobile phone wireless charging function for the first timeIn the case of power-on, the reason for this situation may be that the phone is placed in the incorrect position on the charging board or the charging device is not powered on. First confirm whether the mobile phone model supports wireless charging function, (you can find the mobile phone information on the brand's official website) Check whether the indicator light of the charging board is on.
Charger failure: Try to use the same specifications of the charger for charging, if it can be successfully charged, it is the original charger failure, to replace. Loose or damaged charging cable: Check that the charging cable is securely connected between the device and the power adapter. Such as charging cableIf it is loose or damaged, the current cannot be transmitted normally and cannot be charged. To replace a new charging cable, make sure the plug fits the connector tightly.
Car mobile phone charging can not be charged to do as follows. First of all, check whether the switch of the USB interface on the car is on, such as this switch in the off state, it is not able to charge the phone. If it is a cigarette lighter charger, you should check whether the charger and the car jack are in good contact. You can replace other USB interfaces, such as other USB interfaces can be charged normally, then it proves that there is a problem with this interface.
The reason why the negative electrode is not connected first is because the iron conductive place of the entire vehicle is basically the negative electrode, which is commonly known as the iron, if the negative electrode is connected first, when the positive electrode is connected, the clamp touches any conductive place of the body will cause a short circuit, burning the parts of the car.
2, if you change the hotspot WiFi password: you can enter the setting -- its guard change wireless charge he network and connection -- personal hotspot -- hot spot configuration -- password, enter a new password can be moreChange, and then finish saving. If you have more questions, you can enter vivo official website /vivo mall APP-- my -- online customer service or vivo official website page version -- Slide down the bottom -- online customer service -- enter manual customer service to enter consultation and understanding.
3, open the Internet Explorer browser, enter the gateway address in the browser address bar 19161 in the pop-up input user name password interface, enter your router user name and password. The default user name and password are admin. Therefore, it is highly recommended to change the router password after login. Click to log in. The router interface is displayedSelect Wireless Settings (different router tabs have different names, but they are the same).
4, when it comes to the router is an indispensable daily necessities in every family, but because the object needs to set a password, so many people use it to forget the password, then the router password forgot how to reset the guard change wireless charge ? How to change the router password? Let's take a look. Reset router password Forgotten router password is a common experience for many people, and to solve this problem, the solution is quite simple.
1. Non-huawei wireless chargers may be incompatible with mobile phones, resulting in abnormal wireless charging function.
2, the details are as follows: the interface of charging treasure and portable wifi is incompatible: some charging treasure and portable wifi interface is incompatible, such as charging treasure is MicroUSB interface, and portable wifi needs USBType-C interface, which can not supply power to portable wifi. The output current of the charging treasure is not enough: the charging treasure usually marks its output current, such as 2A, 4A, etc., and the output current is not enough, it can not supply power to the portable wifi.
3. Non-huawei chargers and data cables may be incompatible with the phone, causing the phone to fail to charge. If your mobile phone has not been used for a long time If your mobile phone has not been used for a long time or has not been charged in time after low power shutdown, it is recommended that you charge it for more than 30 minutes to check whether the mobile phone has responded.
4, first replace the charger or test with other devices to ensure that the charger can be used normally, and be careful not to place any items between the iPhone and the charger. If the iPhone does not charge or charges slowly, and the iPhone is equipped with a thick protective case, metal protectionShell or battery case, please remove the protective shell or battery case first.
Method of changing the WiFi password: Go to Settings --WLAN-- click the connected WiFi--IP-- view the IP address; Check the router manual or the administrator address at the bottom of the router, open the browser, enter the address in the address bar, enter the router management login page, enter the administrator account and password; Find the WiFi network name and password, enter the new password to complete the change.
WhatThe first step to changing your wifi password is to find the 'Management address' on the back of your router. Step 2: Type the 'Management address' found on the back of the router into the address bar of your browser and press Enter. Step 3: Click 'My Wi-Fi' on the page. Step 4: Click the Wi-Fi password input box to change the WiFi password.
Set or change the router login password to connect the router to the computer, open a browser, enter 19161 in the address bar (the general router address is this or check the login information on the back of the router) into the route - enter the user name, password, (The default is usually admin). The option to change the login password is usually found in the system Tools in a new page, fill in the user name and user password to change.
Enter Wireless Security Settings After logging in, click "Wireless Settings" and then enter "Wireless Security Settings". In the "Wireless Security Settings" section, you can create a new name (SSID) for your wireless network, which can be a combination of letters and numbers. 4 Change your WIFI Password Next, set a new password.
Browser input. 19161 Press Enter and enter the user namePassword, enter the router Settings, in wireless security. How to set the local network access password? Network access passwords can be turned on and off through the Network and Sharing Center. How to do it: Click Open Network and Sharing Center and select Change Advanced Sharing Settings. Once open, scroll down to the bottom and select Enable Password protected Sharing, then save your changes. It's set up at this point.
1,Land Rover Defender can be said to be a legend in the off-road world, although the new model has arrived, but there are many people think that the old Land Rover Defender is still the king of the 4x4 world. And off-road enthusiasts have never stopped modifying old Land Rover Defenders, such as this Defender 130 pickup.
2. If you're looking for a cool pickup with full character and reliable performance, try this 1997 Land Rover Defender 90 Modified 130 sold by Pedigree Motorcars. There are only 5,000 of the pickup, which is in excellent condition and has a list price of $1.95 million. thisThis article comes from the author of the car home number and does not represent the viewpoint of the car home.
3, because the longer body makes the guard 130 heavier than the guard 110, it has a certain impact on the acceleration performance, and the zero acceleration time is 6 seconds.
4, Land Rover Defender 130 based on the guard 110 to build, the new car continues to use the family language design, the front face of the iconic rectangle plus flat and straight lines design completely retained, looks thick at the same time, but also has a strong sense of strength. In addition, full LED headlights are also equipped, derived from the semicircular day of the old guardDriving light design concept, retro and avant-garde.
5, just a modification kit. The Big Foot Defender is based on the long wheelbase pickup version of the Land Rover Defender 130, with an "exoskeleton" roll cage, winch, high-brightness searchlight and large off-road tires. In addition, if the owner of the Guard 90 or Guard 110 wants to make it look like this, no problem, this kit will also work.
6, the traditional pickup truck is basically non-bearing body, the new Land Rover Defender has been changed to the bearing body. The Honda R is also a load-bearing caridgeline proves that it is still possible to produce a great pickup truck with a carrying body. With the highly rigid body of the new Land Rover Defender, it should not be technically difficult to convert it into a pickup truck.