1, charger problem: if you use a wireless charger, it may be the charger itself has a problem, such as the charger power cord loose, charger interface dirty, charger heat, etc., which may lead to wireless charging instability. Mobile phone problems: If your mobile phone has poor contact with the charging port, charging cableProblems such as loosening may lead to unstable wireless charging.
2, hello, if you use a wireless charger, there is always an intermittent charging prompt tone, it should be that the back of your phone is not accurately placed on the wireless charging contact surface, and it may be that your phone case affects wireless charging, you can remove the phone case and try again.
3, if the iPhone wireless charging suddenly does not charge, it may be because sometimes unpredictable errors occur in the update of the iOS system, which will cause problems with the wireless charging function, usually as long as the restart can be solved. Remove iPhone insuranceSometimes the iPhone protective shell is too thick will also lead to wireless charging, then you can try to remove the iPhone protective shell, and then put back on the wireless charging board to charge.
4, it is estimated that the charger output power is insufficient automatic protection stop output. Although the original charger of the mobile phone is 5V1A, the actual input can be more than 1A, and the 5V2A charger can be used. If the wireless charger output power is only 5W, it is not enough. Only the money spent on the wireless charger, and no input and output parameters, is not matched. Bluetooth headset power is too small, for comparison can not explain the problem, but can sayWireless charging stops after a few seconds 1, if the model is confirmed that there is no problem, but there is still no wireless charging, you can refer to the following methods to try to solve. If the iPhone wireless charging suddenly does not charge, it may be because the iOS system update sometimes appears unpredictable wireless charger stop for a few seconds error, which will cause problems with wireless charging function, usually as long as the restart can be solved.
2, mate60 wireless charging intermittent may beThe wireless charger stops after charging for a few seconds caused by the following reasons: the quality of the charger or charging base is not good, it is recommended to replace the high-quality charger or charging base. The distance between the charging base and the mobile phone is too far, resulting in unstable wireless charging signals. You are advised to keep a proper distance between the mobile phone and the charging base.
3, because millet's wireless charging treasure may charge frame number and charging frequency and your Apple eight p mobile phone charging frequency is not in a band. So in a few seconds it will automatically shut down and you can rematch your phone and then charge it. <4, there may be the following reasons: the distance between the charger and the phone is too far. Wireless charging usually requires keeping the phone within three centimeters of the charger. If the distance is too far, the charge will be interrupted. The charging device or wireless charging base is damaged. If not installed or used properly, the wireless charging device or base may malfunction or become damaged, resulting in charging interruption.
5, wireless charging a few seconds will automatically disconnect the reason: the first is the wireless charging coil is damaged, resulting in the mobile phone in the wireless charging when the current can not be normally transmitted inside the coil to the mobile phone battery. secondThe position of Apple's wireless charging is not aligned with the position of the phone, and the position of Apple's wireless charging coil is in the center position behind the Apple body.
1, high temperature high temperature protection or there is a metal foreign body between the mobile phone and the charging treasure The wireless charger will stop for a few seconds , or the charging treasure or the mobile phoneBad wireless charger charge a few seconds to stop .
2, because millet wireless charger stops for a few seconds wireless charging treasure may charge frame number and charging frequency and your Apple 8 p mobile phone charging frequency is not in a band. So in a few seconds it will automatically shut down and you can rematch your phone and then charge it.
3, the mobile power supply is a charging device produced by a third party, so it will be compatible with the mobile phone, the official recommendation is to use the original charger to charge the mobile phoneThe sample can better protect the service life of the phone and the battery. If the purchased third-party mobile power supply cannot be used, it may be caused by compatibility problems, please contact the dealer.
The distance between the charger and the mobile phone The wireless charger is stopped for a few seconds is too far.Millet wireless charger needs to fit with the mobile phone to charge normally Wireless charger charge for a few seconds stop , if the distance is too far wireless charger charge for a few seconds stop , the light will always flash. The charger port is loose. The interface of the wireless charger must be correctly inserted into the power socket The wireless charger will stop for a few seconds , if the interface is loose the wireless charger will stop for a few seconds , the light will always flash. Charger appearsQuestion.
Hello, if you use a wireless charger, there is always an intermittent charging prompt tone, it should be that the back of your phone is not accurately placed on the wireless charging contact surface, and it may be that your phone case affects wireless charging, you can remove the phone case and try again.
The reason for the automatic disconnect of wireless charging in a few seconds: the first is that the wireless charging coil is damaged, resulting in the current of the mobile phone can not be transmitted normally inside the coil to the battery of the mobile phone during wireless charging. The second is that the position of Apple's wireless charging is not aligned with the position of the phone, and the position of Apple's wireless charging coil is in AppleCentral position behind the fuselage.
Charge the mobile phone to see if it can be normally full (that is, 100%) If you use the original charger of the mobile phone to charge the mobile phone can be normally full, it indicates that there is a fault inside the wireless charger, if the original charger of the mobile phone is not often full, this problem, in the case of the charger, charging data line, and mobile phone tail plug are normal, The problem may be that the charging control circuit on the main board of the mobile phone is faulty.