1, use the original charger and data cable to connect the power supply to charge. For mobile phones with removable battery Samsung wireless charger can not be charged , you can shut down and remove the battery, use a cotton swab to clean the battery contact and mobile phone charging interface. If the above method does not solve the problem, please bring the purchase invoice, repair card and the machine to the Samsung service center for inspection.
2, Samsung wireless charger can not be charged You want to ask Samsung wireless charger can not be charged is Samsung watch wireless charging no reaction is what happened? The reason for this charging does not respond is as follows: Samsung wireless charger can not be charged : Check whether the direction of the watch is loaded into the base is correct, the charging end of the watch back should be fitted with the charging end of the base, if it is installed backwards, it cannot be charged. Replace other data cable, charging head charging attempt. If the problem persists, it is recommended to carryBring the machine, purchase invoice, repair card to the local Samsung after-sales service center for testing.
3, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
4, you want to ask is "Samsung s8 on the wireless charging ring can not charge the reason"This problem? Charging ring compatibility issues: Some wireless charging rings are not compatible with Samsung S8 phones, resulting in normal charging. The thickness of the phone case: The phone case is very thick, which will hinder the normal work of wireless charging. Place the charging ring: Make sure the phone is properly placed on the wireless charging ring to ensure that the charging ring is in good contact with the back of the phone.
5, use the original charger to connect to the home power supply. Replace the power socket Try or replace a data cable with a charger to charge. If the mobile phone can be turned on normally, you are advised to back up data (such as contacts and multimedia files) in the mobile phone to restore itShutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. Or send the repair test to boot charging, such as the mobile phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall the test.
3, Samsung S6 wireless charger, must be placed accurately, because the use of QI technology, the transmitter coil and the receiving coil are relatively small, not almost only 1/3 of the size of the phone, so a slight mismatch, it can not be charged. It is also for this reason that Samsung's wireless charging mobile phone, or itsIts similar wireless charger, QI, did not spread.
When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally. Connect the phone directly to the wired charger to check yesNo Charge can be normal.
Shutdown charging test. Replace the charging position and eliminate the intermittently caused by poor contact of the socket. If conditions allow to replace the standby charger for testing or repair testing, it is recommended to test after uninstallation when charging, such as the mobile phone is equipped with a third-party plug-in such as a charging doctor.
Use the original charger to connect to the home power supply. Replace the power socket Try or replace a data cable with a charger to charge. If the phone can be turned on normally, you are advised to back up data (such as contacts and multimedia files) on the phone and restore the phone to factory Settings. If according to the aboveMethod problems still exist, please bring the purchase invoice, repair card and machine to the nearest service center for inspection.
1, the brand wireless charging ring bad Samsung wireless charger can not be charged Samsung wireless charger can not be charged The solution is as follows Samsung wireless charger can not be charged : use the original charger andThe data cable is connected to the power supply for charging. For the mobile phone with removable battery, you can shut down and remove the battery, use a cotton swab to clean the battery contact and the mobile phone charging interface. Bring the purchase invoice, repair card and machine to Samsung service center for inspection.
2, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you canCan cause a condition that cannot be charged properly.
3, if the wireless charger can not charge the phone, please try Samsung wireless charger can not charge : Use the original charger and data cable to connect the power to charge. For mobile phones with removable batteries, you can shut down and remove the battery, use a cotton swab to clean the battery contact and try the phone charging interface. If the above method does not solve the problem, please bring the purchase invoice, repair card and the machine to the Samsung service center for inspection.
1. First insert the data cable into the charging port of the phone to make it charge normally, and then pull out the data cable to observe whether the charging state can be relieved normally. If not, it may be that the tail plug of the phone has a short circuit, causing the phone to incorrectly display the charging state, you can shut down, and then clean up the dust and impurities in the charging port, and then start up to return to normal.
2, please check whether the back center of the phone is placed in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
3, use the original charger and data cable to connect the power supply to charge. For mobile phones with removable batteries, you can shut down and remove the battery, use a cotton swab to clean the battery contact and try the phone charging interface. If the above method does not solve the problem, please bring the purchase invoice, repair card and the machine to the Samsung service center for inspection.
4, please check the handThe machine is centered on the back of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
5, if the phone can not be charged, it is recommended to carry out the following steps to check and deal with: Use the original charger connected to the home power supply to charge. Replace the power socket Try or replace a data cable with a charger to charge. If the phone can be positiveYou are advised to back up data (such as contacts and multimedia files) in the phone and restore the phone to factory Settings.
6. It is recommended that you use the standard charger and charging cable to charge. If your mobile phone is not used for a long time, or the phone is not charged in time after the low power shutdown, the battery may be over-discharged, it is recommended that you connect the charger and charge for more than 30 minutes to see whether the phone has a reaction.
1, use the original charger to connect to the home power supply. Replace the power socket Try or replace a data cable with a charger to charge. For mobile phones with removable batteries, you can also try: 1) It is recommended to shut down and remove the battery, use a cotton swab to clean the battery contact and the contact point where the phone connects the battery. Reinstall the battery and try charging it again. 2) If possible, replace the battery or use a charger to try charging.
2, please use S6 Edge dedicated original wireless charger. If you use a non-original charger, you may not be able to charge normally. Please checkCheck whether the phone is centered on the back of the wireless charging pad. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge.
3, in this case, it is recommended to try; Shutdown charging test. Replace the charging position and eliminate the intermittent failure caused by poor socket contact. If conditions permit, replace the standby charger for testing. When charging, if the phone is equipped with a third-party plug-in such as charging doctor, it is recommended to uninstall and test.
4, checkCheck whether the original charger and charging cable are used. If not, please replace the original parts. Some machines have a fast charge switch that needs to be manually turned on: Settings - Battery - Fast Wired charge - Slide on (or Settings - Power saving - Fast Charge on). Turn off the device or its screen while charging. Check whether the charging cable and the charging head are plugged into the end. If they are not fully inserted, the fast charging effect cannot be achieved.
5, according to your description, I suggest you: Restart the phone and try. If the problem persists, it is recommended that you take the repair card, purchase invoice and mobile phone to the nearest Samsung mobile phone customer service test.
6, there are the following suggestions: use the original charger to connect to the home power supply to charge; Replace the power socket Try or replace a data cable with a charger to charge. If the phone can be turned on normally, you are advised to back up data on the phone, such as contacts and multimedia files, and restore the phone to factory Settings. If the operation problem still exists according to the above method, please bring the purchase invoice, repair card and machine to the Samsung service center for inspection.