1, this situation is that the Bluetooth headset has been connected to the nearby mobile phone or other devices, and then plug in the power to charge it will lead to red and blue lights alternately flashing. This situation is relatively common, will not be made on the headsetInto the impact. Solution: The red light represents that it is charging, the blue light represents that it is working, and it can be solved by shutting down and recharging. As long as you disconnect the headset from the device, the blue light will not continue to flash.
2, accurately speaking, it is low voltage, low voltage battery suspended animation phenomenon! The solution is very simple, in the morning, I carried out a simple test on this problem, took a Bluetooth headset for a long time, charging, the result of the red light has been flashing, the electricity does not go in, and can not open the machine (ask, no electricity how to turn on). Need to activate the battery! No need to disassemble anything! Solution: Short connection of the positive and negative poles, time is notIt should be too long.
3, the case of not charging is generally a problem with the battery of the blue bud headset. 4, it is recommended to get the Bluebud headset brand after-sales test for specific problems. Blue bud earphones are always flashing red and blue lights when they are charging, how is it that they cannot be charged? In this case, the bluebud headset has been connected to a nearby phone or other device, and then plugged in to charge it will cause the red and blue lights to flash alternately. This is relatively common and does not affect the headphones.
4. This is not normal. 2, Bluetooth headset red and blue light flashing should belong to the matching state, if already andThe phone was successfully matched, and this should not happen again. 3, the case of not charging is generally a problem with the battery of the Bluetooth headset. 4, it is recommended to get the Bluetooth headset brand after-sales test for specific problems.
5, this situation is that the Bluetooth headset has been connected to the nearby mobile phone or other devices, and then plug in the power to charge it will lead to red and blue lights alternately flashing. This is relatively common and does not affect the headphones. The red light represents that it is charging, the blue light represents that it is working, and it can be solved by shutting down and recharging. The battery is dead. The battery is damaged, that is, it cannot be charged, or it is full once chargedOnce used, no.
1. The blue light flashes, indicating that the mobile phone is out of position or blocked by foreign bodies.
2, indicating that it is charging: When the green light on the Xiaomi wireless charger starts to flash, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power. Possible problems or anomalies: However, the green light flashing may also indicateIndicates that some problems or anomalies are encountered during the charging process.
3, although the green light flashing in most cases indicates that the charging is normal, but there may be a problem between the charger and the device, or the device itself has some small conditions. How to solve it? Try these steps! If the green light flashes, you can try the following steps: Make sure the device is tightly connected to the charger, adjust the position slightly, and you may see a change.
1, charger or mobile phone Wireless charging blue light flashing Low battery: Check whether the charger and mobile phone wireless charging blue light flashing is sufficient Wireless charging blue light flashing , if it is insufficient wireless charging blue light flashing , please charge it in time. The charging interface of the charger or mobile phone is damaged: If the charging interface of the charger or mobile phone is damaged wireless charging blue light blinking , please contact the after-sales service for repair or replacement.
2, millet wireless charger green light has been flashing because the charger detected metal foreign body automatic protection Settings. When the charger encounters a metal foreign body near, it will automatically cut off the wireless charging, and continue to flash the green light, and return to normal after the power failure. It is recommended to check whether there is metal on the back of the phone or metal interference near the charger.
3, indicating that it is charging: When the green light on the Xiaomi wireless charger starts to flash, it usually means that the charger is charging the device. This is a standard charging indication that the charger has been properly connected and is transmitting power. Possible problemOr abnormal: However, a flashing green light may also indicate that some problem or abnormal situation has been encountered during charging.
4, the power is off for a while, this is not placed in the right position, metal foreign bodies are detected, and the automatic protection setting is determined to use the official charging head. Second, look carefully at the wireless charging instructions, encounter a metal foreign body near, it will automatically cut off wireless charging, and continue to flash the green light, and return to normal after power off. Check to see if there is metal on the back of your phone, or if there is metal interference nearby, such as your "gold" (iron) ring.
5, first of all, the lamp of the millet wireless charger will start chargingWhen it flickers, it's a normal phenomenon. But if the light keeps flashing, it may be caused by the following reasons: The distance between the charger and the phone is too far. Xiaomi wireless charger needs to fit with the phone to charge normally, if the distance is too far, the light will always flash. The charger port is loose.
6, may be out of power, the protection state is blinking. When the millet wireless charger, millet wireless charger (universal fast charging version) LED light status is green flashing, millet wireless charger is in the error and protection stage. At this time, you should pay attention to whether there is a metal object placed on the wireless charger, please remove it and charge it again