1, first of all 12 wireless charging side magnet is not installed can not be charged.Secondly, airport no magnet means that the magnet adsorption of the charging box is gone, and the earphone can not be connected to the charging box when it is put into the charging box. Finally, it cannot be charged, and you can only replace a charging box.
2, the second is that the charger or data line has a problem, resulting in charging can not continue, so you need to replace the matching charger or data line to recharge. It's because the magnet module under the charging bay has shifted, and it has to be removed for repair. If the item under the Bluetooth headset is stuck in the charging bay, try it with something like a needle or toothpick to see if it can be dialedCome out.
3, you look at the charging box, if it is not good adsorption, as long as the box can be closed normally, it will generally hold the headset to the charging contact, and there will be no failure to charge.
4, the chip on the Apple charger fell off, you can continue to charge, but it is best to replace the charging line in time to avoid security risks. The Apple charger has a number of metal sheets, these metal sheets mainly provide multiple charging paths, accelerate the charging efficiency, the metal sheet falls, will not affect the charging for a short time, but will reduce the charging efficiency.
5, such as the mobile phone you buy in the official channelShell, it will not affect the efficiency of charging, if bought is relatively poor quality, it will certainly affect the charging efficiency if you buy the mobile phone itself has a magnetic strong magnet, in the case of without a mobile phone case, it can be normally sucked.
6, airpodspro at the same time has the need for periodic charging, no power can not work and easy to lose the shortcomings. The accessory that the airpodspro attaches to when charging is a magnet. The airpodspro has a small magnet inside, and there is another small magnet in the corresponding position of the Bluetooth headset charging case, and the twoThe polarity of the small magnet is reversed, so it will attract when the headset is placed in the Bluetooth headset charging case.
2, if the phone itself has no strong magnet, if there is no magnetic phone case, there is no way to attract. If the magnetic charger cannot be fixed, it can only be placed horizontally and cannot be picked up for use. Regardless of whether it has a magnetic function, it is recommended to wear a magnetic phone case, which can not only enhance the adsorption force of strong magnetic, but also effectively protect the mobile phone from being scratched and not being scratched.
3, wireless charging is the transmission of magnetic field energy, magnetic materials will affect the magnetic field, will block the magnetic field transmission, there is no magnetic field, there is no energy, so it will affect wireless charging.
4, without the need to align the device with the coil as other wireless chargers. In fact, the Apple Watch is designed with magnetic charging, and when the back of the Apple Watch is placed on the magnetic charging base, the charger's magnet will align the Apple Watch and start charging.
5, hello, about whether magnets will be used in the wireless charger. First of all, you must understand the principle of wireless charging, that is, electromagnetic induction, through the constant change of the magnetic flux between the two coils, to transfer energy, and electromagneticThe user needs to replace the Qi standard charger.
This situation generally has two possibilities, first of all, it is determined that the earphone and the charging bin's power contact point is caused by poor contact, the treatment method is to clean the contact point, you can use diluted alcohol to wipe the contact point, but it is prohibited to wipe with diluent containing acidic components.
The airpodsmax breathing light has been flashing. It may be that the headset on one side is in bad contact with the headset. You can ignore the AirPodsPro in the Bluetooth of your phone, and then open the charging case cover to reconnect the two headphones when they are in the charging bay. Such asIf that doesn't work, hold down the prototype button on the back of the charging bay for 10 seconds until the iCloud connection button pops up on the phone, which will format the headset bay.
The device is faulty or the configuration is different. The device is faulty. The connection of airpods2 for a new charging bay failed because the device failed, and the device needs to be repaired and tried again. The configuration is different. airpods2 for a new charging compartment connection is not successful because the configuration of the two devices is different, you need to ask the after-sales service to find a solution.
In this case, it does not affect the charging box, but it is recommended to go to a professional repair shopRepair. If the earphones of Airpods PL are loose, it may be the screw on the top is loose, you can go to the maintenance place, please ask a professional to help check the installation. It may be that the screw of the charging box is loose, it is recommended to contact after-sales maintenance; May be purchased defective goods, you can contact the business return.
There may be several reasons why the AirPods box does not respond to charging: The charging box is out of power or damaged. You can try to use the charging cable to charge the charging box or insert the charging port to observe whether the charging indicator light is on. If the charging indicator light is not on and the charging box is charged, it may be chargingThe box is damaged. The earphone charging connector is blocked.
1, Mac notebook can not charge how to do? In the case of failure to charge, don't worry, plug and dial the charger several times, restart the host, to avoid poor contact, the above means are ineffective, observe the color of the charger indicator, if it is green, if it is in winter, it is recommended to open the air conditioning. Wait for the temperature to rise some, and then observe whether it can be charged normally, generally in the north of the outdoor, prone to thisQuestion.
2. Check whether the power adapter works properly. You can try to replace another power adapter to see if it can charge normally. If it is still unable to charge after replacing the power adapter, the battery may be in a short-circuit protection state. Try pulling the battery out and reinserting it, or test it with someone else's adapter to see if it can charge properly. If the above methods can not solve the problem, it may be the battery burned.
3, check whether the charger is intact. Check to see if the power indicator shows the charging status, and check to see if there is a charging sign on your computer. If not, the line or adapter may be faulty, you can try to replace the adapter. Apple's battery protection system stops charging when the temperature is too high or too low. The charging temperature range of lithium batteries is 0℃ to 45℃.