The device is faulty. The flashing light may be power cable damage, contact after-sales treatment. Puppy Vacuum Cleaner was founded in 1999, adhering to the brand mission of providing the best vacuum cleaners for families around the world, 23 years has always focused on the research and development and innovation in the field of vacuum cleaners.
Does the subject want to ask "Why the light has been flashing when the dog mite detector is charging"? The battery is faulty. When the dog mite tester is charging, the light has been flashing because the battery is used for a long time or aging, which belongs to the battery reason, and the solution is to replace the new electricityPool and make sure to use an appropriate charger.
The vacuum cleaner is faulty. Dog vacuum cleaner is a dog brand of cleaning carpet, walls, bed and other dust machine, charging light flashing about 20 seconds on the situation is not normal, because the vacuum cleaner failure, need to find professional maintenance. As a professional vacuum cleaner brand, Puppy vacuum cleaner adheres to the brand mission of "providing the best vacuum cleaner for families all over the world", and always focuses on the research and development and innovation in the field of vacuum cleaners.
Do you mean to ask the cause of the red light flashing when the puppy vacuum cleaner is charging? Puppy vacuum cleaner chargingThe causes are as follows: The power socket and battery socket are not properly plugged. The charging plug and power outlet are not plugged in properly. The battery is low. The motor has difficulty rotating. Dust cup detection is not in place. The battery of the infrared remote is dead. The value of Puppy vacuum cleaner is that everything is user-centric, providing vacuum cleaners for families around the world.
Battery aging The battery of the vacuum cleaner may be aging, so that the battery will not be charged, the red light showing the power is on, if this is really the case, it is best to send the vacuum cleaner to the repair shop to repair it, or directly replace a new battery. The red light all over here is not a charge indicatorThe indicator light, but the dust full indicator light, the dust cup of the vacuum cleaner is filled with garbage, if it is too dirty, the red light will always be on.
When the portable vacuum cleaner is charging, the 3 lights are not charged at the same time. It is common that the battery is not automatically protected for a long time, the battery is not charged, or it is not charged, the output insurance has been burned, the charger's own quality problems, the battery is placed for too long, or the battery plate has a short circuit, resulting in too low voltage. In this case, take the vacuum cleaner to a repair shop for an overhaul and let a professional repair it.
Dog vacuum cleaner d836 charging seat use method. Turn on the sweeper to clean the state, hold the machine, the red light flashes, there is a warning sound, the warning is suspended. Put the vacuum cleaner in front of the charging seat, and the machine will automatically return to the charging station. The host power is insufficient, then by 5 hours of charging, you can determine whether the charging seat can be charged.
Puppy t10 vacuum cleaner charging instructions: You can plug in the charger for a while and see if you can charge it. Generally insist on about an hour is appropriate, if not charged, it needs to check whether there is a circuit protection device,If there is one that can be unplugged without circuit protection, it may be battery damage.
Dog vacuum cleaner can be directly charged or charged with the storage seat, I sometimes charge it will forget to take it down, is not a lot of people are like me, have this kind of trouble, but do not worry, it is charged full of automatic power off, both save electricity and do not worry about will be charged bad, is not very worry.
You need to remove the plug and then reinsert it into the power outlet. The puppy vacuum cleaner can not be charged may be no power outlet, need to open the circuit breaker check, if there is a problem, need to ask a professional electrician for maintenance. The puppy vacuum cleaner can not be charged to see if the power switch button of the vacuum cleaner is pressed, if the power switch button is not pressed, press and then charge it.
The charger itself will have a certain amount of power consumption, (of course, very little), but for the sake of service life, it is still recommended to pull it off after full, because the electronic components will begin to age as long as they are powered on, and the performance will decline.
When cleaning corners, you can use the rotating beam on the base of the Fina TOMEFON-X50 cordless vacuum cleaner to let the brush head inRow 180° rotation. After the cleaning is completed, we only need to insert the power adapter into the charging base and select a corner position to charge without occupying the active area. A typical fully charged Fina TOMEFON-X50 cordless vacuum cleaner can be used for nearly 40 minutes.
The charging port is located at the bottom or side of the vacuum cleaner Dog wireless charger Dog wireless charger , will be chargedThe electrical puppy wireless charger plugs into the charging jack of the vacuum cleaner. Plug the other end of the charger into a power outlet, and once the charger is connected to the power supply, the vacuum cleaner will start charging.
You can plug in the charger for a while and see if you can charge it. Generally insist on about an hour is appropriate. If you do not charge, you need to check whether there is a circuit protection device, if there is that can be unplugged. In the case of no circuit protection device, it may be battery damage puppy wireless charge , then you canTo replace a new battery, it should be able to solve the problem dog wireless charging .
Puppy sweeping robot r60pro how to correctly charge 6400mAh large-capacity lithium battery than the previous generation power increase by 2 times to ensure sufficient suction under the premise of a single battery life of up to 4 hours, built-in 450ml large-capacity dust box, no need to empty dust halfway, easy to control the cleaning task of large apartment. Automatic recharging at the end of each cleaning, support breakpoint continued scanning function, fully charged back to the original position to continue to work, a sweep is not completed next time.
strong> Dog wireless charging , not recommended for general use. Dog T12StormRinse, dog T12ProRinse two vacuum cleaners are suction power 185AW and battery life of 70 minutes Dog wireless charge , and dog T12Pro this suction and drag one vacuum cleaner is suction power 170AW and battery life of 60 minutes. The T11 series are all suction and tow integrated vacuum cleaners, among which the T11Plus has a 150AW suction life of 60 minutes, while the T11ProRinse and T11CycloneRinse has 140AW battery life of 50 minutes.Body and charging base respectively have charging contacts, put the body on the charging base, you can charge dog wireless charging , the power adapter charging current is 800mA, charging 3 hours can work for 20 minutes.
Start from measuring the corresponding voltage of the charger output (low voltage, connected to the vacuum cleaner battery), if there is 12V/16V/24V voltage, the charger is OK. The absence of this voltage means that the charger is faulty and needs to be repaired. Charger repair is not difficultParts updates are also inexpensive.
The official standard is 100-240V 135W adaptive AC power charger, which is 135W power. Power adapter, also known as external power supply, is a small portable electronic equipment and electrical and electronic power supply voltage conversion equipment, commonly seen in mobile phones, liquid crystal displays and notebook computers and other small electronic products. It is composed of shell, transformer, inductor, capacitor, control IC, PCB board and other components.
The power supply voltage of the vacuum cleaner is 15 volts. Vacuum cleaner working voltage 15v means that the power supply voltage of the vacuum cleaner is 15 volts (V), that is, it needs to use a 15V battery or power adapter to power it. A vacuum cleaner is a machine used to remove dust and other fine dirt.
Dog vacuum cleaner D-987 has a variety of configurations, a total of 7 unique brush head designs to meet the cleaning needs of different scenarios. First of all, the patented turtle brush head rolls at a high speed of 8,000 revolutions per minute, and effectively absorbs hidden mites and dander through the three-step cleaning mode of shock, sweep and suction, ensuring the hygiene of the home environment.
1, does the subject want to ask "the dog mite detector charging when the light has been flashing"? The battery is faulty. When charging the dog mite detector, the light has been flashing because the battery is used for a long time or aging, which belongs to the battery reason, the solution is to replace the new battery, and make sure to use the appropriate charger.
2, red, blue, green. red. When the dog mite control machine is insufficient, it will show a red situation. blue. The blue light flashing on the charging of the puppy mite control instrument means that the puppy mite control instrument has been fully charged. green. Puppy mite control meter charging green flashing indicates that it is charging.
3, battery aging may be the battery of the vacuum cleaner aging, so that the battery will not be charged, the red light showing the power, if this is really the case, it is best to send the vacuum cleaner to the repair shop to repair it, or directly replace a new battery. The red light here is not a power indicator, but a dust indicator, and the dust cup of the vacuum cleaner is filled with garbage, and if it is too dirty, the red light will remain on.
4, no power of the anti-mite meter how a charge is the green light is the line is broken or the machine is broken first check whether the data line or charging head is broken. If it's not, then it'sOnly one thing is certain, that is, the charging port of the anti-mite meter is damaged. Normally it's for repairs. Plug in the power supply continuously for 24 hours for the first 15 days, and then use it for about 12 hours a day until the home is free of mites.
5, after the dust box is too full, the use of mites for a long time, if there is no timely cleaning and cleaning, then there will be a lot of dust, dander, etc., in the dust collection box, after reaching a certain upper limit, can not continue to adsorb things, it will automatically stop working, remove the box and dump the garbage.
6. It indicates that the mite removal instrument is faultyMHM. If the household cleaning equipment fails, you can contact the business to see whether it is within the warranty period and whether you can provide corresponding maintenance and fault self-inspection suggestions.
Power failure is one of the common problems that cause the vacuum cleaner to fail to charge. The firstFirst, check whether the socket is working properly, try to connect other appliances to the same socket, and confirm that the power supply is normal. If there is no problem with the socket, check the vacuum cleaner power cord for damage or poor contact. Sometimes, the power cord may be worn or broken due to prolonged use, resulting in abnormal charging. At this point, you need to replace the power cable and try charging again.
Maybe the battery is broken, so it can't be flushed into the power. So this is the time to replace the original battery. Because the battery has a life, generally 2-5 years. Specific with the use of the environment has a direct relationship. There are various causes of failure and they need to be from the outside inFrom mechanical to electrical, from software to hardware step by step to check testing and judgment.
Battery bad, battery bad, charging does not enter, charging current is small, natural green light.
The dog vacuum cleaner is not charged the reason: the charger indicator light is abnormal, causing the illusion that some users are used to carrying the charger with the car, and because of turbulence, the phenomenon of the charger damaged and unable to charge is also very easy to occur. If the fuse in the battery is broken, the rain can easily cause a short circuit of the power supply, and then burn the battery fuse. Battery life end In this case, you can directly go to a professional repair shop for detection and repair.
The battery of the vacuum cleaner is aging, so that the battery will not be charged, of course, the red light showing the power will always be on, if this is really the case, the user is best to send the vacuum cleaner to the repair shop to repair it, or directly replace a new battery. The red light here is not the electricity indicator, but the dust full indicator, the dust cup of the vacuum cleaner is filled with garbage, too dirty, of course, the red light will be on.