The phone case is too thick will affect the charging coil and wireless charger in the phone can not be charged with wireless charging induction, resulting in failure to charge normally. Therefore, it is recommended to remove the protective case of the phone before using the wireless charger to charge Can't be charged with wireless charging ; The charging coil area in the mobile phone is small, and if the mobile phone is placed incorrectly when wireless charging is used, it will also lead to normal charging.
Cause: The system program has a problem, resulting in abnormal charging function hardware, it is recommended to restore the phone to normal use. The reason why the short circuit causes the Apple phone to be charged is probably caused by the short circuit of the charging interface, and there are a large number of spring firing pins in the charging interface of the phone, which can make the line closely connected to the plug of the charging data cable.
ipThe reasons for the failure of hone11 wireless charging are as follows: The mobile phone protective shell may be too thick, it is recommended to choose a thin mobile phone protective shell or not use when using wireless charging. It may be that the phone is not aligned with the charging area of the wireless charger, it is recommended to check the wireless charger specification to determine the wireless charging area. It may be that the wireless charger is not suitable for the wireless charging system of the mobile phone, so it is recommended to use the charger that meets the wireless charging requirements of the mobile phone.
BySome mobile phone protective cases are too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. Please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Non-Huawei wireless chargers may be incompatible with mobile phones, resulting in abnormal wireless charging function.
Make sure the phone is compatible with the wireless charger: Make sure your phone supports wireless charging and that the wireless charger is compatible with your handCompatible model number. Different phone models may have different charging standards, so you must use a wireless charger that supports your phone model. Check the charger and power adapter: Make sure that the wireless charger is working properly and that the appropriate power adapter is connected, and that the power adapter is securely plugged into the power outlet.
Check whether the wireless reverse charging switch is turned on. The phone Settings are as follows: Set the battery and turn on the wireless reverse charging switch. Check whether the battery of your charging phone is above 20%. If the battery of the phone is lower than 20%, charge the phone using the charger firstCan't get electricity? '> Why can't I charge my wireless charger?
1, because some mobile phone protective cover is too thick, or the material of the mobile phone protective cover may affect the recognition function of the mobile phone wireless charger, it is recommended that you take off the mobile phone protective cover and try again. 4, please check whether there are other items between the mobile phone and the wireless charger. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
2, check whether the phone is overheating, it is recommended to charge in a good heat dissipation environment. Verify that the wireless charger indicator light is on normallyAt the same time, check whether the connection between the charging base, data cable, charger, and power supply is in poor contact, and it is recommended to re-plug it once. Verify that the center of the phone is placed in the center of the wireless charging base during charging, and remove other items (such as bus passes, metals, etc.) between the device and the wireless charger.
3, do not support wireless charging: please make sure that your OPPO A92s support wireless charging function. Only devices equipped with wireless charging can be charged via wireless chargers. Charger problem: Please make sure that the wireless charger you are using is working properly and complies with OPPOWireless charging standard for A92s. It is recommended to use OPPO's original wireless charger or a certified charger.
4, please check whether the connection between the wireless charger, charger, data cable is normal, do not place metal items between the mobile phone and the wireless charger, such as: magnets, magnetic cards, etc., such items will affect wireless charging. Please use the original protective case, do not use too thick or magnetic insulation material/metal material protective case, these protective cases may affect the charging efficiency or can not be charged, or even overheating to cause the phone can not be charged or damaged.
This may be due to the following reasons: The charger is not connected correctly First cannot be charged with wireless charging , you need to make sure that the charger is properly connected to the power outlet. If the charger is not connected properly, then your phone will not charge. You can try to re-plug the charger, or replace it with a socket to fix the problem. Second, you need to make sure the phone has been properly placed on the charger.
Mobile phoneIt did not respond to the wireless charger, mainly because the phone did not turn on the wireless charging function. Tap to open the "Settings" option on your phone. On the General Settings page, open the "WPT Charging" feature. After the mobile phone wireless charging function is turned on, the mobile phone is adsorbed on the wireless charger to charge it can not be charged with wireless charging .
Many users once again use the wireless charging function of the mobile phone may not be charged on the situation, generally the reason for this situation may be that the mobile phone is placed on the charging board is not correct or the charging device is notThere was electricity. First confirm whether the mobile phone model supports wireless charging function, (you can find the mobile phone information on the brand's official website) Check whether the indicator light of the charging board is on.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normallySituation.
The ios system update has an unpredictable error can not be charged with wireless charging , iphone protection case is too thick. According to the query of the official website of the digital home, can not be charged with wireless charging , the ios system update has unpredictable errors can not be charged with wireless charging : resulting in noThe line charging function has a problem can not be charged with wireless charging , can be solved by restarting. iphone protection case is too thick: can not wireless charging With wireless charging can not be charged , you can try to remove the protective case, and then put back on the wireless charging board to charge.
Too thick mobile phone case will affect the induction between the charging coil and the wireless charger in the mobile phone, resulting in normal charging. Therefore, it is recommended to remove the protective case of the mobile phone before using the wireless charger to charge; Mobile phone charging coil area is small, if usedThe incorrect placement of the phone during wireless charging will also lead to the failure to charge normally.
Cause: The system program has a problem, resulting in abnormal charging function hardware, it is recommended to restore the phone to normal use. The reason why the short circuit causes the Apple phone to be charged is probably caused by the short circuit of the charging interface, and there are a large number of spring firing pins in the charging interface of the phone, which can make the line closely connected to the plug of the charging data cable.
When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally. Please check the back of the phone. If the protective phone case is too thickCan hinder wireless charging, it is recommended to remove the phone cover and re-charge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.