1, mate30 can not wireless charging reason: wireless charging base indicator light is not bright, please check the charging base, data cable,If the connection between the charger and the power supply is in poor contact, it is recommended that you re-plug it. Is there anything else between the phone and the wireless charging base? If so, please remove it. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected. If the phone is out of position, it will not be able to charge.
2, if your mobile phone cannot use wireless charging, please follow the following steps: Check whether the mobile phone is overheating, it is recommended to charge in a good heat dissipation environment. Check whether the wireless charger indicator light is on normally, and check the charging base, data cable, charger, and power supplyWhether the connection is in poor contact, you are advised to reinsert it.
3. The causes and solutions of Huawei mate30 wireless charging failure are as follows: Check the indicator of the wireless charging base. If the indicator is off, check whether the connection between the charging base, data cable, charger, and power supply is in poor contact. Please check whether there are other items between the phone and the wireless charging base, and remove them if there are.
4, when the mobile phone cannot use wireless charging, please follow the following steps to check: 1, please check whether the wired charging device is connected at the same timeWhen using wired charging and wireless charging, wired charging will be preferred.
5. In the Settings of Huawei mate30, select Battery and then Wireless Charging. In the wireless charging option, turn on the switch to enable the wireless charging function. By following the above three steps, you can easily enable the wireless charging function of Huawei mate30. When you don't need wireless charging, just turn off the wireless charging option. The wireless charging function of Huawei mate30 is very practical, which can make you use your mobile phone more convenient.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original charger. If you use a non-original charger, you may not be able to charge normally.
The causes are as follows: In the notification bar, click the button to enable wireless reverse charging. Required by the device being chargedIt should be placed in the correct position in the center of the back cover. The device to be charged needs to support the standard Qi wireless charging protocol (for example, AppleWatch is a non-Qi wireless charging device, which cannot be charged through the wireless backcharging function). There should be no metal ornaments or foreign objects between the phone and the device being charged.
Xingyue wireless charging can not be used reason: the vehicle does not turn on the wireless charging function. The mobile phone is charged through the wireless charging board in the front of the vehicle, and the wireless charging function needs to be turned on in the vehicle system to realize the wireless charging function of the mobile phone.
There are inclusions between the mobile phone and the wireless charging padThings may not charge properly when they do. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally. Connect your phone directly to the wired charger to see if it can be charged.
There can be many reasons why a phone cannot use wireless charging, but the most common reason is that the phone itself does not support wireless charging technology, or the wireless charging device is faulty or incompatible. First, to use the wireless charging function, the phone must havePrepare the required hardware. Currently, most modern smartphones have built-in wireless charging receivers, which allows them to be compatible with and use wireless charging devices.
Please check that the back of the phone is centered in the center of the wireless charging board. When there are inclusions between the mobile phone and the wireless charging pad, it may not be able to charge normally. Please check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
Samsung S6 wireless charger, must be placed accurately, because the use of QI technology, the transmitter coil and the receiving coil are relatively small, not almost only 1/3 of the size of the phone, so a slight mismatch, you can not charge. It is also for this reason that Samsung's wireless charging mobile phone, or other similar QI noLine charger, did not spread.
Use the original charger to connect to the home power supply. Replace the power socket Try or replace a data cable with a charger to charge. If the phone can be turned on normally, you are advised to back up data (such as contacts and multimedia files) on the phone and restore the phone to factory Settings. If the problem still exists according to the above methods, please bring the purchase invoice, repair card and machine to the nearest service center for inspection.
Check whether there are foreign bodies in the charging interface of the mobile phone, such as liquid intake and debris, resulting in poor contact between the charging interface and the charger, if this situation is recommended