Because some mobile phone protective case is too thick, or the material of the mobile phone protective case may affect the recognition function of the mobile phone wireless charger, it is recommended that you remove the mobile phone protective case and try again. 4, please check whether there is one between the mobile phone and the wireless chargerPlease remove his belongings if any. Wireless charging converts electrical energy into magnetic energy for transmission to the phone, and if the magnetic energy is interfered with, charging will be affected.
Incorrect charging position Check whether the phone is facing the center of the wireless charging pad, if not, it may cause failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affect the charging effect and they need to be removed. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
Try to replace another wireless charging base for charging, locate the fault is this station operatortrong> Wireless charging is broken , resulting in intermittent charging. You can replace a small size wireless car charger Wireless charge broken charge , you can also put a mobile phone on a mobile phone cover, and try to tighten the mobile phone a little. It may be that the clamp force of the car charger itself is not enough, or the car charger itself has quality problems.
2, please use the original charger to charge the phone, or check whether the charging interface is properly connected. It may also be the cause of unstable mains voltage, please replace the charging environment, or replace it to the computer usb chargePlease turn off and charge to check whether it can be charged normally. If possible, please replace a cable or charger for charging. If it does not charge normally, please go to your nearby repair point to check.
3, the mobile phone does not support wireless charging. There are foreign objects on the wireless car charger bracket, metal or mobile phone case cover, metal Xiaomi wireless charger green light flashing Xiaomi wireless charger has foreign matter detection function, if the charger encounters metal foreign objects near, will automatically power off, and continue to flash green light, so check whether there are metal objects around the charger.
4Xiaomi wireless car charger can only clamp a certain width of the mobile phone, Xiaomi wireless car charger is unstable may be because the width of the mobile phone is too small, you can replace a car charger to try. Xiaomi was officially established in April 2010, is a mobile Internet company focusing on the independent research and development of smart phones, positioned in high-performance fever mobile phones. Xiaomi mobile phone, MIUI and Mi chat are the three core businesses of Xiaomi Company. "Born for fever" is the product concept of millet.
5, the power adapter is faulty or the charging line is damaged, you can try to replace the power adapter and the charging line to see if there is still a problem. Charging port internal touchPoor point contact or battery aging can also lead to intermittent charging. If the problem still exists after replacing the power adapter and charging cable, it may be necessary to replace the motherboard or repair the charging port, it is recommended to consult a professional after-sales maintenance center.
Wireless charge disconnected Hello Wireless charge disconnected If you use wireless charger Wireless charge disconnected , there is always an intermittent charging prompt sound, it should be that the back of your phone is not accurately placed on the wireless charging contact surface, and it may be that your phone case affects the wireless charging, you can remove the phone case and try again.
If the iPhone wireless charging suddenly does not charge, it may be because sometimes unpredictable errors occur in the update of the iOS system, which will cause problems with the wireless charging function, usually as long as the restart can be solved. Remove the iPhone case Sometimes the iPhone case is too thick will also lead to wireless charging, then you can tryRemove the iPhone case and put it back on the wireless charging pad to charge.
It is estimated that the charger output power is insufficient and the automatic protection stops the output. Although the original charger of the mobile phone is 5V1A, the actual input can be more than 1A, and the 5V2A charger can be used. If the wireless charger output power is only 5W, it is not enough. Only the money spent on the wireless charger, and no input and output parameters, is not matched. The power of the Bluetooth headset is too small to explain the problem for comparison, but it can explain that the wireless charger is available.
Charge the phone to see if it can be normally full (i.e. 100%) such asIf the use of mobile phone original charger to charge the mobile phone can be normally full, it indicates that there is a fault inside the wireless charger, if the use of mobile phone original charger can not be often full, this problem, in the case of the charger, charging data line, mobile phone tail plug are normal, the problem may be that the charging control circuit on the mobile phone motherboard is faulty.
1, the charging position is not correct Check whether the phone is facing the center of the wireless charging board, if not, possiblyIt will cause failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affect the charging effect and they need to be removed. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
2, mate60 wireless charging intermittent may be caused by the following reasons: the quality of the charger or charging base is poor, it is recommended to replace the high-quality charger or charging base. The distance between the charging base and the mobile phone is too far, resulting in unstable wireless charging signals. You are advised to keep a proper distance between the mobile phone and the charging base.
3, the problem of intermittent wireless charging may be caused by the following aspects: charger problem: If you use a wireless charger, it may be the charger itself has a problem, such as the charger power cord loose, charger interface dirty, charger heat, etc., which may lead to wireless charging instability. Mobile phone problems: If your mobile phone has problems such as poor contact of the charging port and loose charging cable, it may lead to unstable wireless charging.
mate60 wireless charging intermittent may be caused by the following reasons wireless charging break Wireless charging break : The quality of the charger or charging base is not good Wireless charging is broken , it is recommended to replace a high-quality charger or charging base. The distance between the charging base and the mobile phone is too far Wireless charging is broken , resulting in unstable wireless charging signals. It is recommended that the mobile phone be kept at an appropriate distance from the charging base.
The reasons for this situation are as follows: First, the magnetic phone case will interfere with the wireless charging coil of the phone, affecting the charging effect. The wireless charging coil of the mobile phone needs to be accurately aligned with the coil of the charger to achieve charging, and the magnetic phone case will change the shape and weight of the mobile phone, making the wireless charging coil and the coil of the charger cannot be accurately aligned, resulting in poor charging effect.
Check that the phone is facing the center of the wireless charging pad, if not, it may cause a failure to charge. If there are obstacles between the charging pad and the phone, such as keys, coins, etc., it will affectCharging effect. We need to move them. The phone case is too thick thick protective case may affect the charging effect, try to take down the phone case and then charge.
The problem of intermittent wireless charging may be caused by the following aspects: charger problem: If you use a wireless charger, it may be the charger itself has a problem, such as the charger power cord is loose, the charger interface is dirty, the charger is hot, etc., which may lead to wireless charging instability. Mobile phone problems: If your mobile phone has problems such as poor contact of the charging port and loose charging cable, it may lead to unstable wireless charging.
Wireless charging accessories damaged, foreign body blocking, etc. Wireless charging accessories damaged: The use of an external wireless charger or accessories Wireless charging broken , damage or failure. Check that the charger and related devices are working properly Wireless charge break to ensure compatibility with Apple 13. Foreign object blocking: The wireless charge is broken in the wireless charging area applicable to the Apple 13, any foreign matter placed between the phone and the base, blocking the transmission signal will affect the normal wireless charging.
If the iPhone wireless charging suddenly does not charge Wireless charging is broken , it may be because sometimes unpredictable errors occur in the update of the iOS system, which will cause problems with the wireless charging function, usually as long as the restart can be solved. Remove the iPhone case Sometimes the iPhone case is too thick will also lead to wireless charging, then you can try the iPhonRemove the protective shell and put it back on the wireless charging board for charging.
Please use with the Qi certified charger to exclude whether there is a problem with the wireless charger Wireless charging broken charge ; If your iPhone has a thick case, metal case, or battery case, try removing the case or case; If you have notifications turned on, your iPhone will vibrate a lot and may displace, causing it to stop charging. If this happens, consider turning off the vibrate feature: or temporarily turn on Do not Disturb mode to prevent your iPhone from moving.